Difference between revisions of "Template:Netoworking rutx configuration example mikrotik pppoe"

From Teltonika Networks Wiki
Line 17: Line 17:
  
 
==Mikrotik (server) configuration==
 
==Mikrotik (server) configuration==
 +
 +
Connect to MikroTik by using '''WinBox''' application and follow all the further steps to create PPPoE server
 +
on LAN port 5.
  
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_1_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_1_v1.png|border|class=tlt-border]]
 +
 +
# Open '''Bridge''' settings.
 +
# Navigate to '''Ports''' section.
 +
# Select '''ether5'''.
 +
# Press '''Delete'''.
  
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_2_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_2_v1.png|border|class=tlt-border]]
 +
 +
# Open '''IP''' settings.
 +
# Select '''Pool''' settings.
 +
# Press '''Add''' button.
 +
# Create a '''Name''' (anything you want).
 +
# Write '''Addresses''', it is an address range which will be used for PPPoE clients (in this tutorial I used
 +
192.168.5.10-192.168.5.20).
 +
# Press '''Apply'''.
 +
# Press '''Ok'''.
  
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]]

Revision as of 18:45, 5 March 2020

Introduction

This article provides a guide on how to configure PPPoE server on Mikrotik and how to connect RUTX router, Windows computer to it.

Prerequisites

  • Any RUTXxx device.
  • One MikroTik router (this guide was created by using MikroTik RB750Gr3).
  • Windows 10 computer.
  • WinBox application (it is used to access the MikroTik router).

Topology

Networking rutx configuration example mikrotik pppoe topology v1.png

Mikrotik (server) configuration

Connect to MikroTik by using WinBox application and follow all the further steps to create PPPoE server on LAN port 5.

Networking rutx configuration example mikrotik pppoe 1 v1.png

  1. Open Bridge settings.
  2. Navigate to Ports section.
  3. Select ether5.
  4. Press Delete.

Networking rutx configuration example mikrotik pppoe 2 v1.png

  1. Open IP settings.
  2. Select Pool settings.
  3. Press Add button.
  4. Create a Name (anything you want).
  5. Write Addresses, it is an address range which will be used for PPPoE clients (in this tutorial I used

192.168.5.10-192.168.5.20).

  1. Press Apply.
  2. Press Ok.

Networking rutx configuration example mikrotik pppoe 3 v1.png

Networking rutx configuration example mikrotik pppoe 4 v1.png

Networking rutx configuration example mikrotik pppoe 5 v1.png

Networking rutx configuration example mikrotik pppoe 6 v1.png

Networking rutx configuration example mikrotik pppoe 7 v1.png

Networking rutx configuration example mikrotik pppoe 8 v1.png

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Netoworking_rutx_configuration_example_mikrotik_pppoe&oldid=56309"