Teltonika Networks Wiki

Changes

Template:Netoworking rutx configuration example mikrotik pppoe (view source)

Revision as of 18:42, 19 March 2020

4,746 bytes added ,  18:42, 19 March 2020
no edit summary
Line 1: Line 1:  
==Introduction==
 
==Introduction==
    +
PPPoE (Point-to-Point Protocol over Ethernet) is a specification for connecting multiple computer users on an Ethernet local area network to a remote site through common customer premises equipment, which is the telephone company's term for a modem and similar devices. PPPoE can be used to have an office or building-full of users share a common Digital Subscriber Line (DSL), cable modem, or wireless connection to the Internet. PPPoE combines the Point-to-Point Protocol (PPP), commonly used in dialup connections, with the Ethernet protocol, which supports multiple users in a local area network. The PPP protocol information is encapsulated within an Ethernet frame.
       
This article provides a guide on how to configure '''PPPoE''' server on Mikrotik and how to connect RUTX router, Windows computer to it.
 
This article provides a guide on how to configure '''PPPoE''' server on Mikrotik and how to connect RUTX router, Windows computer to it.
−
   
==Prerequisites==
 
==Prerequisites==
    
* Any RUTXxx device.
 
* Any RUTXxx device.
 
* One MikroTik router (this guide was created by using MikroTik RB750Gr3).
 
* One MikroTik router (this guide was created by using MikroTik RB750Gr3).
−
* Windows 10 computer.  
+
* Windows 10 computer. (Mikrotik and RUTXxx configuration will also work with other OS platforms)
 
* WinBox application (it is used to access the MikroTik router).
 
* WinBox application (it is used to access the MikroTik router).
   Line 17: Line 17:     
==Mikrotik (server) configuration==
 
==Mikrotik (server) configuration==
 +
 +
Connect to MikroTik by using '''WinBox''' application and follow all the further steps to create PPPoE server
 +
on LAN port 5.
    
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_1_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_1_v1.png|border|class=tlt-border]]
 +
 +
# Open '''Bridge''' settings.
 +
# Navigate to '''Ports''' section.
 +
# Select '''ether5'''.
 +
# Press '''Delete'''.
    
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_2_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_2_v1.png|border|class=tlt-border]]
 +
 +
# Open '''IP''' settings.
 +
# Select '''Pool''' settings.
 +
# Press '''Add''' button.
 +
# Create a '''Name''' (anything you want).
 +
# Write '''Addresses''', it is an address range which will be used for PPPoE clients (in this tutorial I used 192.168.5.10-192.168.5.20).
 +
# Press '''Apply'''.
 +
# Press '''Ok'''.
    
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_3_v1.png|border|class=tlt-border]]
 +
 +
# Open '''PPP''' settings.
 +
# Select '''PPPoE Servers'''.
 +
# Press '''Add''' button.
 +
# Write '''Service Name''' (anything you want).
 +
# Select '''Interface''' (ether5).
 +
# Press '''Apply''' button.
 +
# Press '''Ok''' button.
    
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_4_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_4_v1.png|border|class=tlt-border]]
 +
 +
# If you have closed the window, open '''PPP''' settings again.
 +
# Select '''Secrets'''.
 +
# Press '''Add''' button.
 +
# Create a '''Name''' (it will be later used to connect PPPoE server).
 +
# Create a '''Password''' (it will be later used to connect PPPoE server).
 +
# Press '''Apply'''.
 +
# Press '''Ok'''.
    
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_5_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_5_v1.png|border|class=tlt-border]]
 +
 +
# If you have closed the window, open '''PPP''' settings again.
 +
# Select '''Profiles'''.
 +
# Press '''Add'''.
 +
# Create a '''Name'''.
 +
# Set '''Local Address''' (select your LAN IP-Pool).
 +
# Set '''Remote Address''' (select PPPoE IP-Pool which you recently created).
 +
# Press '''Apply'''.
 +
# Press '''Ok'''.
    
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_6_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_6_v1.png|border|class=tlt-border]]
 +
 +
# If you have closed the window, open '''PPP''' settings again.
 +
# Select '''PPPoE''' Servers.
 +
# Double click the '''PPPoE server''', which you created before.
 +
# Change '''Default Profile''' to PPPoE.
 +
# Press '''Apply'''.
 +
# Press '''Ok'''.
    
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_7_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_7_v1.png|border|class=tlt-border]]
    
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_8_v1.png|border|class=tlt-border]]
 
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_8_v1.png|border|class=tlt-border]]
 +
 +
# Open '''IP''' settings.
 +
# Select '''Firewall'''.
 +
# Select '''NAT'''.
 +
# Press '''Add'''.
 +
# Write '''Src. Address''' (PPPoE server address).
 +
# Select '''Action''' (masquarade).
 +
# Press '''Apply'''.
 +
# Press '''Ok'''.
 +
 +
==RUTXxx client configuration==
 +
 +
Access RUTXxx WebUI, go to '''Network > LAN''' and then press '''Edit''' LAN button.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_9_v1.png|border|class=tlt-border]]
 +
 +
Change '''Protocol''' to '''PPPoE'''.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_10_v1.png|border|class=tlt-border]]
 +
 +
Then it will ask you '''“Really switch protocol?”''' press '''SWITCH PROTOCOL'''.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_11_v1.png|border|class=tlt-border]]
 +
 +
Write '''Username''' and '''Password''' which you recently created in MikroTik '''Secrets''' settings. And then press '''SAVE & APPLY'''. You will lose connection to your router as soon as you save the settings.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_12_v1.png.png|border|class=tlt-border]]
 +
 +
Now plug MikroTik router’s port 5 to any of the RUTXxx LAN ports.
 +
 +
==Windows 10 client configuration==
 +
 +
Connect your PC to any of the remaining RUTXxx LAN ports. Go to '''Control Panel > Network and Internet > Network and Sharing Center'''.  Then press '''Set up a new connection or network'''.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_13_v1.png|border|class=tlt-border]]
 +
 +
Select '''Connect to the Internet''' and then press '''Next'''.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_14_v1.png|border|class=tlt-border]]
 +
 +
If you alread have internet, select '''Set up a new connection anyway''', if you don’t, skip this step.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_15_v1.png|border|class=tlt-border]]
 +
 +
Select '''Broadband (PPPoE)'''.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_16_v1.png|border|class=tlt-border]]
 +
 +
Write '''User name''' and '''Password''' (use the same ones, you used to connect the router) and press '''Connect'''.
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_17_v1.png|border|class=tlt-border]]
 +
 +
When it is done connecting it will show this message:
 +
 +
[[File:Networking_rutx_configuration_example_mikrotik_pppoe_18_v1.png|border|class=tlt-border]]
 +
 +
Check whether you have internet connection (try to access any website).
Justinasm
0

edits

Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/56286...57025"