Changes

==Configuration scheme==

==Configuration scheme==

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_topology_v1.png|border|class=tlt-border|1100x1100px]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_topology_v1.png|border|class=tlt-border|700px]]

==Mikrotik configuration==

==Mikrotik configuration==

==RUT configuration==

==RUT configuration==

Access RUTxxx WebUI and go to '''Services > VPN > L2TP'''. There create a new configuration by selecting role '''Client'', writing '''New configuration name''' (anything you want) and pressing '''Add New''' button. It should appear after a few seconds. Then press '''Edit'''.

Access RUTxxx WebUI and go to '''Services > VPN > L2TP'''. There create a new configuration by selecting role '''Client'', writing '''New configuration name''' and pressing '''Add New''' button. It should appear after a few seconds. Then press '''Edit'''.

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_3_v1.jpg|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_l2tp_ipsec_mikrotik_3_v1.jpg|border|class=tlt-border]]

# Write '''Pre-shared key''' (write the password which you created with this command /ip ipsec identity add generate-policy=port-override auth-method=pre-shared-key secret="password" peer=l2tpserver ).

# Write '''Pre-shared key''' (write the password which you created with this command /ip ipsec identity add generate-policy=port-override auth-method=pre-shared-key secret="password" peer=l2tpserver ).

# Press '''Save'''.

# Press '''Save'''.

# Write '''IPsec''' interface name (write anything you want) and press '''Add'''.

# Write '''IPsec''' interface name and press '''Add'''.

# When the interface appears like in the example, press '''Edit'''.

# When the interface appears like in the example, press '''Edit'''.