Changes

Access RUTxxx WebUI and go to '''Service > VPN > OpenVPN'''. There create a new configuration by selecting role '''Client''', writing '''New configuration name''' and pressing '''Add New''' button. It should appear after a few seconds. Then press '''Edit'''.

Access RUTxxx WebUI and go to '''Service > VPN > OpenVPN'''. There create a new configuration by selecting role '''Client''', writing '''New configuration name''' and pressing '''Add New''' button. It should appear after a few seconds. Then press '''Edit'''.

[[File:Networking_rutxxx_configuration_example_ovpn_mikrotik_3_v1.jpg|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_ovpn_mikrotik_3_v1.jpg|border|class=tlt-border]]

Then apply the following configuration.  

Then apply the following configuration.  

[[File:Networking_rutxxx_configuration_example_ovpn_mikrotik_4_v1.jpg|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_ovpn_mikrotik_4_v1.jpg|border|class=tlt-border]]

 

# '''Enable''' Instance.

# '''Enable''' Instance.

==Testing configuration==

==Testing configuration==

Go to '''Status > Routes''' and in the '''Active IP Routes''' table you should see these two new routes.

Go to '''Status > Routes''' and in the '''Active IP Routes''' table you should see these two new routes.

[[File:Networking_rutxxx_configuration_example_ovpn_mikrotik_5_v1.jpg|border|class=tlt-border]]

[[File:Networking_rutxxx_configuration_example_ovpn_mikrotik_5_v1.jpg|border|class=tlt-border]]

 

Try to ping the remote VPN endpoint via '''CLI''' or '''SSH''' using this command:

Try to ping the remote VPN endpoint via '''CLI''' or '''SSH''' using this command:

  ping 192.168.8.250

  ping 192.168.8.250

[[File:Networking rutxxx configuration example ovpn mikrotik 6 v1.jpg|border|class=tlt-border]]

[[File:Networking rutxxx configuration example ovpn mikrotik 6 v1.jpg|border|class=tlt-border]]