Changes

==RUT955 configurations==

==RUT955 configurations==

When configuring routers to allow devices connected through serial port, communicate with each other, in this example RS232, acting as both, Master and Slave, you only need to configure section in Services > RS232/RS485 > RS232. Configuration on both devices is almost identical except Client and Server part, where they are reversed.

To achieve communication between your devices, which are connected to routers through serial port, apply this configuration. In this example RS232 will act as both, Master and Slave. Configuration on both devices is almost identical except '''Client''' and '''Server''' part, where they are reversed. In order to find these settings in routers WebUI go to '''Services > RS232/RS485 > RS232'''

[[File:Networking_rut955_configuration_example_bidirectional_serial_comunication_over_tcp_rut_configuration.png|border|class=tlt-border|1100x1100px]]

[[File:Networking_rut955_configuration_example_bidirectional_serial_comunication_over_tcp_rut_configuration.png|border|class=tlt-border|1100x1100px]]