Line 31: |
Line 31: |
| # Write '''Pre shared key''' (a shared password used for authentication between the peers. The value of this field must match on both instances). | | # Write '''Pre shared key''' (a shared password used for authentication between the peers. The value of this field must match on both instances). |
| # Set '''Local identifier''' (device identifier for IPsec tunnel, write RUTX LAN IP address). | | # Set '''Local identifier''' (device identifier for IPsec tunnel, write RUTX LAN IP address). |
− | # Set '''Remote identifier''' (remote address of the remote peer, write Cisco LAN IP address). | + | # Set '''Remote identifier''' (remote device identifier for IPsec tunnel, write Cisco LAN IP address). |
| # Write '''Local subnet''' (an IP address/Subnet mask of the router on which the IPsec instance is configured). | | # Write '''Local subnet''' (an IP address/Subnet mask of the router on which the IPsec instance is configured). |
| # Write '''Remote subnet''' (LAN IP address/Subnet mask of the Cisco router). | | # Write '''Remote subnet''' (LAN IP address/Subnet mask of the Cisco router). |
Line 65: |
Line 65: |
| # Select '''Group: Group''' (5). | | # Select '''Group: Group''' (5). |
| | | |
− | When you are do with '''IPsec Profiles''', save settings, go to '''Site-to-Site''' settings and apply the following configuration: | + | When you are done with '''IPsec Profiles''', save settings, go to '''Site-to-Site''' settings and apply the following configuration: |
| | | |
| [[File:Networking_rutxxx_configuration_example_ipsec_cisco_s2s_v2.png|border|class=tlt-border]] | | [[File:Networking_rutxxx_configuration_example_ipsec_cisco_s2s_v2.png|border|class=tlt-border]] |