Difference between revisions of "Template:Networking device leds"

Revision as of 09:12, 1 April 2020

This wiki page contains information about {{{name}}} router LEDs and their actions.

[[Category:{{{name}}}]]

@@ Line 44: / Line 44: @@
 {{#if: {{{sig|}}}
-  | The signal strength LEDs can also be used as a time indicator for holding the reset button. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Each second, a new signal strength LED lights up. When all {{{sig_led_num}}} LEDs are lit up, it represents that 5 seconds have passed since you pressed down on the reset button and that you can release it.
+  | The signal strength LEDs can also be used as a time indicator for holding the reset button. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Depending on number of signal strength LEDs, time needed to reset router are divided in equal periods and whet it past a new signal strength LED lights up. When all {{{sig_led_num}}} LEDs are lit up, it represents that 5 seconds have passed since you pressed down on the reset button and that you can release it.
 After releasing the button, all {{{sig_led_num}}} LEDs will start blinking every 1 second. This signifies that the router has begun the factory reset.