Difference between revisions of "Template:Networking device leds"
From Teltonika Networks Wiki
| Line 75: | Line 75: | ||
}} | }} | ||
| − | + | The signal strength LEDs can also be used as a <b>time indicator for holding the reset button</b>. When you press and hold the reset button, you have to hold it pressed for 5 seconds (by default) to initiate a factory reset. Depending on a number of signal strength LEDs, time needed to reset router are divided in equal periods, when it passed a new signal strength LED lights up. | |
In case with <b>{{{name}}}</b>, when all {{{sig_led_num}}} signal strength LEDs are lit up, they represent that 5 seconds have passed since you pressed down on the reset button and you can release it now. | In case with <b>{{{name}}}</b>, when all {{{sig_led_num}}} signal strength LEDs are lit up, they represent that 5 seconds have passed since you pressed down on the reset button and you can release it now. | ||
Revision as of 11:00, 1 April 2020
This wiki page contains information about {{{name}}} router LEDs and their actions.
Power LED
The power LED is located on the bottom left corner of the front panel, near the power connector:
[[File:{{{file_power_led}}}|{{{size_power_led}}}px]]
It can perform two different actions:
| Action | Description |
|---|---|
| LED turned ON | Router is powered up |
| LED turned OFF | Router is not power up |
[[Category:{{{name}}}]]
