Changes

<ul>

<ul>

     <li>Default Address (LAN IP): <b>192.168.{{#switch:{{{series}}}|TRB14x|TRB5=2|#default=1}}.{{#switch:{{{series}}}|TAP100=3|#default=1}}</b></li>

     <li>Default Address (LAN IP): <b>192.168.{{#switch:{{{series}}}|TRB14x|TRB5=2|#default=1}}.{{#switch:{{{series}}}|TAP200|TAP100=3|#default=1}}</b></li>

     <li>Default Username: <b>admin</b></li>

     <li>Default Username: <b>admin</b></li>

     <li>Default Password: {{#ifeq:{{{unique_pass}}}|1|see password on bottom of the device|<b>admin01</b> or random generated password<span class="asterisk">*</span>}}</li>

     <li>Default Password: {{#ifeq:{{{unique_pass}}}|1|see password on bottom of the device|<b>admin01</b> or random generated password<span class="asterisk">*</span>}}</li>

<ul>

<ul>

     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}

     <li><b>Reboot the device</b>. If the reset button is pressed for up to 4 seconds, the device will reboot. {{#switch:{{{name}}}|RUT300|RUTX08|RUTX10=|#default=Start of the reboot will be indicated by the flashing {{#switch:{{{series}}}|TAP100=power led.|#default=of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs together with the green connection status LED.</li>}}}}

     <li><b>Factory reset</b>. If the reset button is pressed for at least 5 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. When all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} LEDs light up, it indicates that 5 seconds have passed and the reset button can be released. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (5 seconds) can be changed in the {{#switch: {{{series}}}

     <li><b>Factory reset</b>. If the reset button is pressed for at least 12 seconds (by default), the device will perform a factory reset and reboot. {{#ifeq:{{{sms}}}|1|{{#switch:{{{series}}}|TAP100=|#default=Signal strength LEDs indicate the elapsed time while holding the reset button. Start of the factory reset will be indicated by flashing of all {{#switch:{{{series}}}|TRB2xx|TRB5|TCR1|RUT36X=3|RUTX|RUTM={{#switch:{{{name}}}|RUTX12|RUTX14|RUTXR1|RUTX50|RUTM12|RUTM50=3|#default=5}}|#default=5}} signal strength LEDs.}}|}} <br><b>NOTE</b>: the default button hold time value (min time 12 seconds, max time 20 seconds) can be changed in the {{#switch: {{{series}}}

| TRB14x|TRB2xx|TRB5 = gateway

| TRB14x|TRB2xx|TRB5 = gateway

| router's}} WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>

| router's}} WebUI, from the <b>System → Administration → [[{{{name}}}_Administration#General|General]]</b> page.</li>

===WebUI===

===WebUI===

----

----

You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to the Backup section found under the System tab (<b>System → Backup → [[{{{name}}}_Backup#Restore_default_settings|Restore default settings]]</b>). In the very bottom of the page there's a <b>Restore</b> button that performs a factory reset on click:

You can also perform a factory reset from the router's WebUI. To do so, login to the router and go to the Backup section found under the System tab (<b>System → Maintenance → Backup → [[{{{name}}}_Maintenance#Restore_default_settings|Restore default settings]]</b>). In the very bottom of the page there's a <b>Restore</b> button that performs a factory reset on click:

[[File:Networking_rutos_manual_device_recovery_option_reset_webui.png|border|class=tlt-border]]

[[File:Networking_rutos_manual_device_recovery_option_reset_webui.png|border|class=tlt-border]]

}}

}}

You can find more information on the command line interface (CLI) <b>[[{{{name}}} CLI|here]]</b>.

You can find more information on the command line interface (CLI) <b>[[{{{name}}}_Maintenance#CLI|here]]</b>.

{{#switch:{{{series}}}

{{#switch:{{{series}}}