9,567
edits
Changes
Template:Networking device manual device recovery bootloader (view source)
Revision as of 15:39, 23 February 2022
, 15:39, 23 February 2022no edit summary
If you followed all the steps correctly, all panel LEDs should light up. This means that the device is in the bootloader menu state. If that is not the case, repeat the steps again.
If you followed all the steps correctly, all panel LEDs should light up. This means that the device is in the bootloader menu state. If that is not the case, repeat the steps again.
Regardless of what the {{#ifeq: {{{series}}}| TRB2xx | gateway's | router's }} IP address was before, the IP address of the {{#ifeq: {{{series}}}| TRB2xx | gateway | router }} when it's in the bootloader menu state is always <b>192.168.1.1</b>. So in order to reach the {{#ifeq: {{{series}}}| TRB2xx | gateway | router }}, you'll have to set up a static IP address that's in the <b>192.168.1.0/24</b> network (fox instance, 192.168.1.2) on your computer. Instructions are provided in the links below:
Regardless of what the {{#ifeq: {{{series}}}| TRB2xx | gateway's | router's }} IP address was before, the IP address of the {{#ifeq: {{{series}}}| TRB2xx | gateway | router }} when it's in the bootloader menu state is always <b>192.168.1.1</b>. So in order to reach the {{#ifeq: {{{series}}}| TRB2xx | gateway | router }}, you'll have to set up a static IP address that's in the <b>192.168.1.0/24</b> network (for instance, 192.168.1.2) on your computer. Instructions are provided in the links below:
<ul>
<ul>