9,561
edits
Changes
Template:Networking device manual sd card (view source)
Revision as of 12:25, 24 October 2023
, 12:25, 24 October 2023Text replacement - "\{\{Template: Networking_rutos_manual_fw_disclosure (.*) (.*) (.*) \}\}" to "{{Template: Networking_device_manual_fw_disclosure | series = {{{series}}} | name = {{{name}}} | fw_version ={{Template: Networking_device_manual_latest_fw | series = {{{series}}} | name = {{{name}}} }} }}"
This chapter provides a description on how to correctly <b>insert a SD card</b> into a {{{name}}} device.
This chapter provides a description on how to correctly <b>insert a SD card</b> into a {{{name}}} device.
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| series = {{{series}}}
| name = {{{name}}}
}}
}}
}}
}}
<li>Run commands <code>opkg update</code> and <code>opkg install e2fsprogs</code> to download required tools.</li>
<li>Run commands <code>opkg update</code> and <code>opkg install e2fsprogs</code> to download required tools.</li>
<li>Unmount the SD card with command <code>umount /dev/mmcblk0p1</code></li>
<li>Unmount the SD card with command <code>umount /dev/mmcblk0p1</code></li>
<li>Start formatting with command <code>mkfs.ext<b>X</b> /devmmcblk0p1</code> where X is either 2 (for ext2 format), 3 (for ext3 format) or 4 (for ext4 format).</li>
<li>Start formatting with command <code>mkfs.ext<b>X</b> /dev/mmcblk0p1</code> where X is either 2 (for ext2 format), 3 (for ext3 format) or 4 (for ext4 format).</li>
<li>A successful format procedure should look like this:</li>
<li>A successful format procedure should look like this:</li>
<code>root@Teltonika-RUT955:~# mkfs.ext2 /dev/mmcblk0p1</br>
<code>root@Teltonika-RUT955:~# mkfs.ext2 /dev/mmcblk0p1</br>
