Difference between revisions of "Template:Networking device manual unmanaged switch recovery troubleshooting"

From Teltonika Networks Wiki
Line 23: Line 23:
 
       <dl>
 
       <dl>
 
           <dt>Issue</dt>
 
           <dt>Issue</dt>
           <dd>Connected router/modem do not have internet connection</dd>
+
           <dd>Bad cabling between router/modem and {{{name}}}</dd>
 
           <dt>Solution</dt>
 
           <dt>Solution</dt>
           <dd>Check your router/modem users manual</dd>
+
           <dd>Check cabling from router/modem to {{{name}}}. If link between devices is established Orange LED at connected Ethernet port port must be lit ([https://wiki.teltonika-networks.com/view/{{{name}}}_LEDs#Ethernet_port LED meaning]. If LED is not lit, change cable and check again</dd>
 
         </dl>
 
         </dl>
 
     </li>
 
     </li>

Revision as of 11:42, 24 April 2020

Summary

{{{name}}} is an unmanaged switch without active operating system running to control inside processes. All work is done by integrated chips, which has built-in logic to control switching and PoE operations.

This chapter contains information of possible recovery and troubleshooting options for a {{{name}}} unmanaged switch.

Ethernet port LEDs not litting up

Connected devices has no internet

Devices connected to {{{name}}} do not have internet connected.

  1. Issue
    Connected router/modem do not have internet connection
    Solution
    Check your router/modem users manual
  2. Issue
    Bad cabling between router/modem and {{{name}}}
    Solution
    Check cabling from router/modem to {{{name}}}. If link between devices is established Orange LED at connected Ethernet port port must be lit (LED meaning. If LED is not lit, change cable and check again
Check cabling from router or modem to {{{name}}}. If link between devices is established Orange LED at connected Ethernet port port must be lit. More information about LED meaning is located here
  • Check cabling from connected device to {{{name}}}. If link between switch and connected device is established Orange LED at connected Ethernet port must be lit. More information about LED meaning is located here
  • text
  • Connected device not powering via PoE

    [[Category:{{{name}}} Manual]]