9,561
edits
Changes
Template:Networking rut2xx firmware change log (view source)
Revision as of 10:28, 19 April 2023
, 10:28, 19 April 2023no edit summary
===='''[[Media:RUT2XX R 00.01.13 WEBUI.bin|RUT2XX_R_00.01.13]]''' | 2020.10.23====
===<b>[[Media:RUT2_R_00.07.04.2_WEBUI.bin|RUT2_R_00.07.04.2]]</b> | 2023.04.18===
* New features:
* <b>New</b>
** IPsec Xauth
** nftables support
* Improvements:
* <b>Improvement</b>
** Added Input/Output default chain policy selections for firewall zones
** <b>Network</b>
** Removed IPv6 related options from Setup Wizard
*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
** Improved WebUI page loading speed
*** Improved SIM detection algorithm
** Added a possibility to set MQTT credentials for Modbus Data Sender
*** Improved Multi-APN connection establishment time
** Added options to keep connection open for Modbus TCP Slave
** <b>WebUI</b>
** Added TLS certificate options to HTTP(S) data sending for Modbus data
*** Improved Overview page performance
** Added the option to send SMS messages to multiple numbers on Modbus Alarms
** <b>System</b>
** Added IPsec aggressive host enable option
*** Changed hostname to router name
** Expanded IPSec identifier validation
*** Updated OpenSSL to version 1.1.1t
** Added WiFi SSID field validation
*** Updated CA certificates to version 20211016
** Changed IP leasing sequence in mobile Passthrough mode
*** Updated libiwinfo to version 2022-08-19
** Added SHA512 support
** Added MD5 & SHA256 checksum calculation for Configuration Backup files
** Added uploaded package signature verification to Package Manager
** Added new program that sends and reads GRE Tunnel 'keep alive' packets
** Changed default WAN Failover values
* Fixes:
* <b>Fix</b>
** Fixed Modbus MQTT Gateway not responding when connection with broker restarts
** <b>Network</b>
** Fixed Modbus MQTT Gateway not responding when topics gave special characters
*** Fixed IPv4, IPv6 mobile connection restarts
** Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
*** Fixed operator scanning when mobile interface is disabled
** Fixed configuration field validations in the Modbus MQTT gateway page
*** Fixed data limit and tracking when software flow offloading is enabled
** Fixed MQTT topic validation in Modbus pages
*** Added network reload call before bringing the mobile interface up
** Fixed configuration field validations in the ThingWorx page
*** Fixed Port-based VLAN ID calculation issue
** Fixed Periodic Output Control table layout
*** Fixed PDP context authentication when using special characters
** Fixed security related issues to file uploading and HTTP headers
** <b>Services</b>
** Fixed adding new L2TP and PPTP instances on non-English WebUI
*** Fixed event text for configurable inputs/outputs on I/O Juggler
** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
*** Fixed I/O PIN3 value not changing via MODBUS TCP
** Fixed WiFi SSID string handling in fix_sta_ap.sh
*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
** Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
** Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
** Fixed table design in the System → Administration → Access Control → Safety page
*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
** Fixed not setting iptables rules for mobile interface
*** Fixed OpenVPN keep alive setting migration issue
** Fixed saving APN after firmware upgrade
*** Fixed PPTP server name setting migration issue
** Fixed default mobile MTU setting
*** Fixed missing WebUI issue caused by Email Relay installation
** Fixed access to LAN page when mobile Bridge mode is enabled
*** Fixed NTP's Operator Station Synchronization memory leak issue
** SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
*** Fixed test email validation
** Removed IPv6 Subprefix Hint field from the Network → LAN page
** <b>System</b>
** Fixed DNS push from OpenVPN server
*** Fixed libcares vulnerability CVE-2022-4904
** Fixed L2TP over IPsec with Android 10
*** Fixed frr vulnerability CVE-2022-37035
** Removed crt_rms deprecated service
*** Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
** Fixed RMS collecting data usage
*** Removed ability for non root users to edit scripts that get executed as root
** Fixed mobile status error for Load Balancing
** Fixed WAN MAC address value in SMS Utilities command response
** Fixed answer delay for Call Utilities commands
** Fixed key combination not working
** Removed Wireguard from the Network → Status page when this package is not installed
===='''[[Media:RUT2XX R 00.01.12.3 WEBUI.bin|RUT2XX_R_00.01.12.3]]''' | 2020.06.15====
===<b>[[Media:RUT2_R_00.07.04.1_WEBUI.bin|RUT2_R_00.07.04.1]]</b> | 2023.03.24===
* Improvements:
* <b>Fix</b>
** Improved RMS connection establishment
** <b>Network</b>
*** Fixed Data Limit issue
===='''[[Media:RUT2XX R 00.01.12.2 WEBUI.bin|RUT2XX_R_00.01.12.2]]''' | 2020.05.08====
===<b>[[Media:RUT2_R_00.07.04_WEBUI.bin|RUT2_R_00.07.04]]</b> | 2023.03.07===
*Fixes:
* <b>Improvements</b>
**Fixed Verizon operator APN configuration
** <b>WebUI</b>
*** Improved data persistence between page refreshes
*** Improved page navigation behavior
*** Improved redirect logic to open configuration edit modals
*** Updated the 'Status -> Mobile' page
*** Updated interface card in the Overview page
*** Separated Sent and Received data bars on the chart in the Mobile Usage page
** <b>Network</b>
*** Added an info message displayed when a faulty SIM card is inserted
*** Added ResIOT operator's APNs to the APN database
*** Improved mobile connection re-establishment after reboot
*** Improved mobile connection recovery in cases where it was lost unexpectedly
*** Improved 'Deny data roaming' operation when switching between operators
*** Changed default WiFi AP cipher to CCMP (AES)
*** Added the logging of MAC addresses rejected by a WiFi AP
** <b>Services</b>
*** Added MQTT support to I/O Juggler
*** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
*** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
*** Added argument support for the 'Execute custom script' SMS rule
*** Added a frequency option 'schedule' Modbus Master
*** Added pagination to Events Reporting overview
*** Added limit to Events Reporting rule list
*** Added email logging for Events reporting
*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
*** Added a limit of 30 for NTP instances
*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
*** Added "make before break" option to IPsec configuration
*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
*** Improved MODBUS Master connection handling to reduce connection count
*** Updated modbus request error messages
*** Added OpenVPN server ip block support
*** Added MQTT support for MODBUS Master alarms
*** Added the possibility to get the device's Ethernet port data via SNMP
** <b>System</b>
*** Updated bash to version 5.1.16
*** Added detailed FW update failure error message to Events Log
*** Improved firmware upload/validation error messages
*** Updated Turkish language support
*** Added protocol column to IP block page
*** Added "vpns.log" file to the Troubleshoot package
*** Added Wireguard tunnel information to the Troubleshoot package
*** Updated default admin group access rights
*** Updated DFOTA notification to show "More info" only when the update is forced
* <b>Fix</b>
** <b>WebUI</b>
*** Fixed MAC address showing on mobile interfaces
*** Fixed mobile cell ID displaying in hexadecimal
*** Fixed mobile data limit card creation in the Overview page
*** Fixed modem widget disappearing from the Overview page
*** Fixed Services page not displaying data after Thingworx package is installed
** <b>Network</b>
*** Fixed interface priority change issue
*** Fixed a Custom Firewall Rule editing issue
*** Fixed DMZ configuration saving while it is disabled
*** Fixed Port Scan script execution failure
*** Fixed Firewall zone duplication issue
*** Fixed call function when VoLTE is disabled
*** Fixed VoLTE control when IMS is not enabled
*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
*** Fixed APN authentication when using empty credentials
*** Fixed manual APN selection from list
*** Fixed disabled WiFi interface after factory reset
*** Fixed WiFi interface creation with SAE mixed encryption
** <b>Services</b>
*** Fixed I/O Scheduler overlapping instances issue
*** Fixed Input/Output image pin colors
*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
*** Fixed WiFi Hotspot landing page uploaded theme image display
*** Fixed WiFi Hotspot trial user deletion issue
*** Fixed WiFi Hotspot service crash when associated WiFi interface is not up
*** Fixed WiFi Hotspot password request by SMS
*** Fixed WiFi Scanner starting process when the WiFi interface is disabled
*** Added limitations on message size and quantity of email messages in Email to SMS
*** Fixed SMTP HELLO value parsing issue
*** Fixed SMS message window reset button
*** Fixed not being able to save empty 'Message text' field in Auto Reply
*** Fixed multi-part SMS concatenation
*** Fixed multi-part SMS processing
*** Fixed SMS error message on 'Mobile Data Reset' action
*** Fixed Data To Server JSON format %n, %N and %s flag issues
*** Fixed Events Reporting email data clean
*** Fixed Events Reporting missing config selections
*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
*** Fixed IPsec instance deletion after removing DMVPN package
*** Fixed IPSec migration via Backup file when DMVPN is configured
*** Fixed IPsec naming issue when the includes an equals sign
*** Fixed L2TP client to use correct interface on failover events
*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
*** Fixed MODBUS database size limiting issue
*** Fixed MODBUS MQTT Gateway client ID input
*** Fixed MODBUS TCP Slave RSSI value
*** Fixed MODBUS test button returning errors when several non-connected devices are configured
*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
*** Fixed OpenVPN TLS client creation issue while LAN is down
*** Fixed Package Manager displaying non-existent packages
*** Fixed Package Manager errors showing up after successful installations
*** Fixed Periodic Reboot entry duplication after a power cycle
*** Fixed PPTP 'Client to client' option not being applied after save
*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
*** Fixed WebUI unavailability after unsuccessful package install
** <b>System</b>
*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
*** Fixed bash vulnerability CVE-2022-3715
*** Fixed CGI-IO file download vulnerability CVE-2022-38333
*** Fixed libxml2 vulnerability CVE-2022-40304
*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
*** Fixed LED animation during firmware upgrade
*** Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version
*** Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
*** Improved file upload logic
*** Fixed GPL firmware compilation with selected Tinc package
*** Fixed OpenVPN Static Key migration via keep settings issue
*** Fixed NTP time zone name setting migration when the name contains whitespaces
*** Fixed language setting issue
*** Fixed integer validation on industrial services
*** Fixed LED indications when PDP type is IPv6
*** Fixed issues with PDP type and SMS limit period migration via keep settings
===<b>[[Media:RUT2_R_00.07.03.4_WEBUI.bin|RUT2_R_00.07.03.4]]</b> | 2023.02.09===
* <b>Fix</b>
** <b>Network</b>
*** Changed generic modem restart method
*** Fixed mobile page VoLTE switching issues
** <b>Services</b>
*** Sanitized tcpdump storage location
** <b>System</b>
*** Fixed legacy backup upload
*** Fixed upgrade from legacy FW issue with keep settings
===<b>[[Media:RUT2_R_00.07.03.3_WEBUI.bin|RUT2_R_00.07.03.3]]</b> | 2023.01.25===
* <b>Fix</b>
** <b>Network</b>
*** Fixed disabled WiFi interface after factory reset
===<b>[[Media:RUT2_R_00.07.03.2_WEBUI.bin|RUT2_R_00.07.03.2]]</b> | 2023.01.13===
* <b>New</b>
** <b>System</b>
*** Japanese language
*Fixes:
* <b>Improvements</b>
**TR-069 WAN type value fix
** <b>Network</b>
**RMS batch number instead of product code bug fix
*** Optimized mobile netifd script installation
**Added missing HMAC options and PKCS12 support to OpenVPN
* <b>Fix</b>
** <b>Network</b>
*** Shortened modem hang monitor timeout
*** Fixed VLAN option setting when changing VLAN ID
===<b>[[Media:RUT2_R_00.07.03.1_WEBUI.bin|RUT2_R_00.07.03.1]]</b> | 2023.01.03===
*Improvements:
* <b>Improvements</b>
**UPnP updated to version 2.1
** <b>System</b>
**SIM switching optimizations
*** Remove front-end certificate validation
**Faster SSH private key generation on first boot
** <b>Network</b>
**Added network, serving and neighbor cell information to Troubleshoot files
*** Optimized mobile netifd script installation
*Fixes:
* <b>Fix</b>
**Wget Reboot minimal interval for action 'reboot' added
** <b>Network</b>
**Ping Reboot packet size 0 fix
*** Fixed modem communication validation
**Modbus WebUI fixes
*** Fixed connection establishment in IPv6 only mode
** <b>Services</b>
*** Fixed libxml2 vulnerability CVE-2022-40303
**SMS Utilities UCI API fixes
*** Fixed an IPsec Phase one & two setting migration issue
**SMS Utilities SMS response status fix
*** Fixed OpenVPN migration from legacy firmwares
**SMS-Utilities WiFi/Mobile on/off fix
*** Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware
**Clarified WebUI options for SMS Forwarding
** <b>System</b>
**Hotspot Statistics tab shows incorrect information fix
*** Fixed JSON key parsing; keys can now be any printable character sequence
**Hotspot session name validation fix
*** Fixed memory leak in 'session' module
**Hotspot landing page file upload limits increased
** <b>WebUI</b>
**Fixed MAC address clone configuration
*** Fixed file pretty name parsing
**Fixed sessions table dependency on authentication mode
**Events log network type logging on modem service restart fix
**Events Reporting typos that prevented rules being matched fixes
**Removed OpenVPN converting names to hex
**Added file upload limits
**DDNS name validation fix
**Hostname and router name after backup upload fix
**Fixed default VRRP config to follow RFC 2338
**Input/Output label & functionality fixes
**FOTA memory calculation fix
**Removed "Site Survey" page
===='''[[Media:RUT2XX R 00.01.10 WEBUI.bin|RUT2XX_R_00.01.10]]''' | 2019.07.12====
===<b>[[Media:RUT2_R_00.07.03_WEBUI.bin|RUT2_R_00.07.03]]</b> | 2022.12.16===
*New features:
* <b>New</b>
**New flash validation added
** <b>Network</b>
*** Firewall DMZ page
** <b>Services</b>
*** Java package
*** SFTP server support
*** OPC UA client
*** Hotspot registered users management page
** <b>System</b>
*** Portuguese language
*** Spanish language
*** Turkish language
*** Email Relay package
** <b>WebUI</b>
*** New Web menu design
*Improvements
* <b>Improvements</b>
**Added reply after mobileon and mobileoff SMS Utilities commands
** <b>Network</b>
*** Updated modem handling, attachment, tracking and connection establishment processes
*** Added the possibility to select multiple ports in all firewall port fields
*** Added 'Match' traffic by type option to firewall traffic rules
*** Added DNS servers and routing table fields to the Wireguard page
*** Improved generating network topology
*** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
*** Update Firewall Traffic Rules page with DSCP and MARK options
*** Added keepalive, holdtime and connect timers to BGP configuration
*** Added 'Use gateway metric' to network protocols web interface
*** Added more DHCPv6 client events to system log
*** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
*** Added option to select subnet parameters in mobile Passthrough/Bridge modes
*** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
*** Added mobile connection state for IPv6
*** Added individual WiFi toggle support
*** Added error message when DFS channel is selected during scanning
** <b>Services</b>
*** Added CSP headers to Hotspot Landing Page
*** Added hotspot user script validation
*** Improved logging of disconnecting client devices
*** Implemented Hotspot 'forget' method, which removes user from DB by MAC
*** Added execute custom script SMS Utilities rule
*** Added receiver and transceiver mode support to SMPP
*** Added timezone synchronization with GSM operator option to NTP Client
*** Updated Zerotier web interface
*** Added IPsec Flush connection option on tunnel initialization
*** Added MODBUS slave regfile validation
*** Added delay, number of timeouts, always reconnect options to MODBUS Master service
*** Added DMVPN Phase 2 and Phase 3 support
*** Added synchronization counting to NTP client
*** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
*** Added 'Unregister' button to RMS page
*** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
*** Updated Zerotier package to version 1.10.1
*** Added automatic package removal upon failed installation in Package Manager
*** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
*** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
*** Updated sqm-scripts to version 1.5.1
*** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
*** Added monthly reboot option to periodic reboot function
*** Added support for multiple custom option selection to SSTP configuration
*** Added PKCS12 certificate chain support to OpenVPN
*** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
*** Added QoS selection to MQTT Modbus Gateway
*** Improved RAM usage during upload and installation of packages via Package Manager
*** Updated curl to version 7.86.0
*** Added brute-force prevention measures to Post/Get
*** Added automatic private and public key generation to Wireguard VPN
*** Added multiple Remote source IP support to IPsec
*** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
*** Added functionality to rotate log file when log is saved to Flash memory
*** Improved performance while fetching packages on repeat visits to the Package Manager page
** <b>System</b>
*** Added a 'test mail' button to the Administration -> Recipients page
*** Added option to clear blocked IPs in the Access Control page after reboot
*** Updated Web Request-Response core logic
*** Added certificate validation to all services that support certificate upload
*** Updated URL protocol validations
*** Removed profile update requests during Save & apply
*** Optimized profile switching logic
** <b>WebUI</b>
*** Added an indication to the Interfaces page that displays when data limit is enabled
*** Added bootloader version to the Device section in the System page
*** Added configuration page shortcuts to Overview page widgets
*** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
*** Updated network interfaces protocols web interface
*** Updated 404 page to include navigation menu
*Fixes:
* <b>Fix</b>
**Firmware upgrade with keep settings fix
** <b>Network</b>
**PPTP fix when upgrading firmware with keep settings
*** Fixed jumbo frames MTU issue
**Do not autocomplete non-system passwords fix
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
**Added validation for 'Service mode' change
*** Fixed NHRP web interface issues
**VRRP template fix
*** Fixed WAN interface configuration interfering with LAN
**Added validation for user group number format
*** Fixed mdcollect memory leak issue
**SMS Gateway: removed new line add after configuration save
*** Fixed data limit not resetting properly
**Added validation to prevent shell command execution via 'name' field in Wake on LAN
*** Fixed incorrect mobile data usage calculations for multiple day periods
**NTP time zone options fix
*** Fixed an Auto APN 'Keep settings' issue
**MQTT bridge with SSL/TLS connection fix
*** Fixed data counting after mobile data limit has been reached
**'Use DNS servers advertised by peer' does not save fix
*** Fixed mobile band not setting correctly on first try
**'FW update available' fix
*** Fixed incorrect data limit conditions causing unwanted SIM switches
**WAN state and IP print fixes
*** Fixed Passthrough DHCP lease time setting
*** Fixed mobile bridge mode issue when no DNS servers are supplied
*** Added new Operator Lists instance name validations
*** Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
*** Fixed wireless interfaces connections not reestablishing after disabling & enabling again
*** Added wget tracking method to WAN Failover
*** Added interface checks to remove inaccurate Failover events from the Event Log
*** Fixed Wired WAN connectivity issue when Failover interfaces are disabled
*** Fixed Failover fallback issue
** <b>Services</b>
*** Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares
*** Fixed relay state switching
*** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
*** Added I/O restart on configuration profile change
*** Fixed I/O voltage range display for power socket pins
*** Fixed SMNP OID for I/O state
*** Fixed I/O Juggler SMS text message Save & Apply issue
*** Fixed Hotspot connected user list maximum upload/download value limits
*** Fixed incorrect connected Hotspot user information in RMS JSON
*** Removed unnecessary field from the Port Mirroring page
*** Fixed Hotspot issues related to specific connected phones
*** Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
*** Fixed WiFi Scanner hostname validation issues
*** Fixed UCI SMS Rule return message to display new changes
*** Fixed DNP3 issues when asking for modem temperature
*** Fixed base64 encoding of SMS messages when forwarding to HTTP
*** Fixed SMS sending issues when using multiple APN
*** Added Gateway modem option to IP Block and WoL in SMS Rule edit
*** Fixed unblocking IP addresses with an SMS message
*** Fixed Mobile Utilities page not load properly on some occasions
*** Fixed dbus vulnerability CVE-2020-35512
*** Fixed dnsmasq vulnerability CVE-2022-0934
*** Fixed ext4 vulnerability CVE-2021-3428
*** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
*** Fixed libxm12 vulnerability CVE-2022-29824
*** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
*** Fixed MQTT DoS vulnerability CVE-2021-41039
*** Fixed privoxy vulnerability CVE-2021-44542
*** Fixed python3 vulnerability CVE-2022-42919
*** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
*** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
*** Fixed switching between RMS connection types while the device is unregistered
*** Fixed reload issues in website blocking feature
*** Fixed IPsec PSK secret required field validation
*** Fixed bandwidth limiting after QoS is enabled for the first time
*** Fixed Dropbear issues when logging in over IPv6
*** Fixed Modbus status in Status -> Services page
*** Fixed Azure IoT Hub application issues when sending large volumes of data
*** Fixed Azure IoT Hub MQTT password validation
*** Fixed DMVPN configuration migration issue
*** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
*** Fixed DMVPN IPsec connection issue
*** Fixed DMVPN mobile interface 'Keep settings' migration issue
*** Fixed Dynamic DNS long hostname text display issue
*** Fixed Events Reporting memory leak issue
*** Fixed Events Reporting not triggering after flipping an I/O slider
*** Fixed FOTA cron job not starting after factory reset
*** Fixed IPsec local firewall option parsing
*** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
*** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
*** Fixed NTP pool hostname validation
*** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
*** Fixed OpenVPN configuration saving issue when using HMAC key authentication
*** Fixed OpenVPN custom dev name transformation to correct format
*** Fixed OpenVPN device name setting logic when uploading config from file
*** Fixed OpenVPN instance status display
*** Fixed OpenVPN TAP (bridged) configuration detection
*** Fixed Qos configuration saving issue occurring after instance deletion
*** Fixed RMS JSON incorrect WAN state and IP information
*** Fixed RMS step access issue in the Setup Wizard page
*** Fixed SNMP issues after reboot while using a Hotspot
*** Fixed SNMP generating MIB files for devices in accordance with to their hardware
*** Fixed SNMP traps not working after SNMP is installed from server
*** Fixed SSTP client route creation issue
*** Fixed UPNP secure mode not turning off issue
*** Fixed Wireguard route to endpoint issue
*** Fixed manual package installation for queued packages
*** Fixed NAT Rules dependency from IPsec web instance
*** Returned usleep utility
*** Updated Australian and South African NordVPN server IP addresses
** <b>System</b>
*** Fixed certificate signing issues
*** Fixed Telnet, CLI access blocking after max invalid tries
*** Fixed FW upgrade with 'Keep settings' while low free space is available
*** Fixed backup file duplication issue
*** Fixed network device handling in system
** <b>WebUI</b>
*** Fixed Hotspot interface display
*** Fixed side widget accessibility during first login
*** Fixed file upload issues
*** Fixed drag and drop issue in the Traffic Rules page
*** Fixed protocol display in the overview of the Interfaces page
*** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
*** Fixed login errors after browser tab restoration
*** Fixed redirect to newly set IP address after Interface configuration
*** Fixed firmware upgrade verify spinner not closing
*** Fixed an issue with file upload via drag and drop
===='''[[Media:RUT2XX R 00.01.07.1 WEBUI.bin|RUT2XX_R_00.01.07.1]]''' | 2019.06.10====
===<b>[[Media:RUT2_R_00.07.02.7_WEBUI.bin|RUT2_R_00.07.02.7]]</b> | 2022.09.12===
*Fixes:
* <b>Improvements:</b>
**Increased RMS HTTP Proxy resource limit
** Improved manual-auto connection mode
* <b>Fixes</b>
** Fixed AT command for SMS storage usage
** Fixed CVE-2022-1012 memory leak vulnerability
** Fixed CVE-2022-37434 kernel vulnerability
** Fixed interface option reset after VLAN ID change
** Removed memory leak on port events
** Fixed WiFi Scanner out of range crash when iterating collected data
===<b>[[Media:RUT2_R_00.07.02.6_WEBUI.bin|RUT2_R_00.07.02.6]]</b> | 2022.08.24===
*Fixes:
* <b>Improvements:</b>
** Added 'home.vodafone.de' APN
** Improved stability of device information storage
**QoS: Speed limitation fix
**Network: Delete static protocol options after change to DHCP fix
* <b>Fixes:</b>
** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
** Fixed Serial-symlink dmesg messages{{#ifeq:{{{name}}}|RUT240|
** Fixed VoLTE management|}}
** Fixed OpenVPN tls-auth and tls-crypt option names
===<b>[[Media:RUT2_R_00.07.02.5_WEBUI.bin|RUT2_R_00.07.02.5]]</b> | 2022.08.12===
* Improvements:
** Updated curl to version 7.83.1
** Updated firmware validation error messages
** Added multiple source IP address support to the Port Forwards page
** Increased custom APN Username & Password field maximum length to 64 symbols
** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
** Improved mobile connection status handling
** Added CSP headers Hotspot WebUI landing page
*New features:
* Fixes:
**Added Wake on LAN functionality
** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
**Added Wake on LAN SMS Utilities rule
** Fixed CVE-2022-30065 busybox vulnerability
**Added STunnel feature to VPN services
** Fixed file upload path traversal
** Removed Data to Server limit to proccess less than 10 instances
** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
** Fixed OpenVPN dev setting logic
** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
** Fixed MAC and leasetime setting for Bridge & Passthrough modes
** Fixed modal tabs navigation when editing wireless interface with non-english languages
===<b>[[Media:RUT2_R_00.07.02.4_WEBUI.bin|RUT2_R_00.07.02.4]]</b> | 2022.07.20===
*Fixes:
* Improvements:
**L2TP network restart after connection loss fix
** Added default password change warning message before firmware downgrade
**OpenVPN service restart when TLS-Password is changed fix
** Extended time period for device to make connection to operator
** Reduced the number of modem reboots when changing mobile settings
** Reduced excessive log output when no SIM card is inserted
**IPSec psk_key save after older firmware upgrade fix
** Added modem restart prevention on modem init
** Added disable RPLMN option in the SIM section of the SIM card config
**Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
**Hotspot firewall rules fix
**Data-only SIM fix
* Fixes:
** Fixed CVE-2022-2068 vulnerability
** Disabled autoconnect on stop-network call
** Fixed Hotspot login via landing page issue
===<b>[[Media:RUT2_R_00.07.02.2_WEBUI.bin|RUT2_R_00.07.02.2]]</b> | 2022.06.27===
* Improvements:
** Added ping to DNS IPv6 support
** Added modem reset to default state after device FW upgrade
** Modem init now checks NVRAM sensitive commands before setting
** GSM output was made consistent
** Updated FSTools package to version 2022-05-03
** Added security headers to web requests
* Fixes:
** Fixed CVE-2019-12900 libbz2 vulnerability
** Fixed behavior of some gsmctl commands
** Fixed CVE-2022-23303 hostapd vulnerability
** Fixed CVE-2022-29581 Linux kernel vulnerability
** Fixed CVE-2022-29458 ncurses vulnerability
** Fixed CVE-2022-1292 c_rehash script command injection vulnerability
** Fixed band locking issue
** Fixed race condition for wireless configuration initialization
** Fixed operator control issue
===<b>[[Media:RUT2_R_00.07.02.1_WEBUI.bin|RUT2_R_00.07.02.1]]</b> | 2022.06.06===
*Improvements
* Improvements:
**Updated mobile operator database
** Improved GSM related messages in Troubleshoot logs
*Fixes:
* Fixes:
**Fixed multiwan restart sequence issues causing VPN instabilities
** Fixed IGMP Proxy menu item not appearing after package installation
** Fixed default mobile network configuration generation
** Fixed MODBUS write requests and Mobile Utils option setting
**IPsec init script fix
**Fixed lua dispatcher error after reboot
===='''[[Media:RUT2XX R 00.00.553 WEBUI.bin|RUT2XX_R_00.00.553]]''' | 2018.03.09====
===<b>[[Media:RUT2_R_00.07.02_WEBUI.bin|RUT2_R_00.07.02]]</b> | 2022.05.23===
*New features:
* <b>New features</b>
**Added Redirect LAN to GRE function
** Overview side widget
** IGMP Proxy
** Privileged Access Management (PAM)
** AWS Greengrass support
** HTTPS certificate and key upload feature
** SSH public keys edit box
** License page
** DNP3 data for Data to Server
*Fixes:
* <b>Improvements</b>
**Mobile Data Limit fixes
** Updated busybox to version: 1.34.1
**User's password removed from users table
** Updated curl to version 7.79.1
**Firmware upgrade message fixed
** Added iptables filter package for string filtering
** Added CHAP authentication for L2TP VPN
** Added IPv6 support for L2TPv3 VPN
** Added EAP-MSCHAPV2 authentication method for IPsec VPN
** Added IPv6 support to Auto Reboot
** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
** Updated SNMP version 5.9.1
** Added OpenSSL authentication options to SNMPv3
** Added support for OSPF redistribution options and OSPF neighbors
** Added password field to BGP Peers page
** Extended BGP "AS" field validation to accept integers up to 4294967295
** Added "DHE+RSA" to OpenVPN cipher selections
** Increased OpenVPN max password length from 128 bytes to 512 bytes
** Made HMAC key direction initial value dependent on the role of the instance (client or server)
** Made HMAC key and HMAC authentication key upload fields required
** Added DES to IPsec encryption algorithms selections
** Added special character support for CHAP secrets
** Added validation requirements for PPTP user list username field
** Added option to manually enter Public key in Wireguard configuration
** Made generating Wireguard keys possible only while in auto mode
** Added Events Log database to troubleshoot archive
** Added RFC1918 filter field
** Added the possibility to unblock multiple blocked devices at once
** Added 'Port' column to blocked login attempts table
** Added Speedtest server refresh
** Updated Speedtest server list
** Added asterisk option to Site Blocking
** Added MD5 and SHA256 checksums to package validation page
** Changed certificate requirements to only require client key file if client certificate is used
** Added pagination and data retention between table pages
** Added pagination functionality to tables when there are more than 10 records
** Improved table sorting by saving user provided sort settings in the browser
** Improved drag and drop functionality
** Added the possibility to drag and drop files onto upload components
** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
** Added 'Strict-Transport-Security' response header for HTTPS
** Added 'breadcrumbs' to modal windows
** Improved initial WebUI loading after login
** Added mobile bytes sent and bytes received SNMP OIDs
** Added mobile LED turn off feature ('System -> Administration' page)
** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
** Updated mobile usage data point calculation logic
** Added the possibility to manually enter operator number
** Improved obtain mobile cell ID process
** Added modem restart if SIM card is removed during APN database fetching process
** Added unauthorized call logging
** Added space character support in SMS commands
** Disabled SMS modem storage configuration form when SIM is not inserted
** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
** Added external modem SMS limit Overview card and widget
** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
** Added duplicate value check for list configuration options
** Changed mobile card instance design
** Fixed 'Mobile Data usage reset' SMS rule
** Fixed the default state parameter of SMS list POST/GET command
** Added Hotspot configuration profiles
** Added local Hotspot user password hashing
** Added Hotspot password encoding option
** Improved Hotspot related firewall rule setting
** Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
** Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
** Added ubus support to Hotspot
** Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
** Added I/O SNMP trap
** Added ISO 8601 time format to I/O Juggler's '%ts' parameter
** Added device name parameter '%pc' to I/O Juggler
** Added PPPoE VLAN priority support
** Made VRRP ping section dependent on main instance
** Added 'WAN to LAN' switch
* <b>Fixes</b>
** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
** Fixed CVE-2022-28391 busybox vulnerability
** Fixed CVE-2018-16789 shellinabox vulnerability
** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
** Fixed zlib backport security issue
** Fixed Wireguard firewall zone assignment
** Fixed queued packages disappearing from list after FW upgrade with keep settings
** Fixed error message display for multiple input validation rules
** Fixed incorrect DHCP validation range for start and limit fields
** Removed 'Bring up on boot' option from network interface configuration pages
** Fixed coma-separated DHCP options disappearing after save
** Fixed exclude and listen interfaces
** Fixed 'Use broadcast flag' option saving
** Fixed firewall zone assignment when creating new interfaces
** Fixed OpenVPN 'Netmask' and 'IP address' field validations
** Fixed OpenVPN TAP configuration saving issue
** Fixed OpenVPN switching to TUN mode when uploading a configuration from file
** Fixed dynamic BGP route state display
** Fixed BGP peer enable in edit page
** Fixed issue when no L2TP client instance could be bound to IPsec
** Fixed firewall rule and zone behavior related to config section creation
** Added default value for L2TPv3 netmask, which is now written to config after save
** Fixed passthrough option saving to IPsec file
** Fixed DMVPN issue where instance configuration could not be saved
** Fixed Wireguard peer could not be saved issue
** Fixed NTP client time synchronization after factory reset
** Fixed device time display with selected time zone
** Fixed MODBUS TCP indexation missing bracket issue
** Fixed initial MODBUS TCP request count validation
** Fixed PIN 3/4 direction switching over MODBUS TCP
** Fixed MODBUS data to MQTT socket closing issue when connection fails
** Fixed MODBUS alarm configuration deletion
** Fixed DNP3 master not working after FW upgrade with 'keep settings'
** Fixed DNP outstation not returning error messages
** Added missing SNMP objects: mobile IP, data sent/received today
** Fixed MQTT Publisher 'Remote address' field validation
** Fixed long interface name support for Azure IoT Hub
** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
** Fixed missing sent/received data issue
** Fixed URL input field length validation
** Fixed admin login issue after upload of backup from a device with older firmware versions
** Fixed MAC address formatting in Events reporting messages
** Fixed Events reporting DHCP lease message spam, when no new lease is added
** Fixed logging crashing after downloading Troubleshoot file
** Made Wake on LAN visible only on devices with Ethernet ports
** Fixed Traffic log file transfer to FTP server
** Fixed Web Filter service reloading after a host list file is uploaded
** Fixed access denied messages when sending JSON-RPC requests from root user
** Fixed error message display about duplicated intervals in Profile scheduler
** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
** Corrected OSPF Routing card values, value positions and names
** Fixed global secret instances not being removed when there are no IPsec instances
** Fixed uploaded file remove icon not staying in position on hover
** Fixed Overview card collapse issue that made it unresponsive after too many clicks
** Removed WAN6 interface from the Overview page
** Fixed mobile IPv6 display in Events Reporting status messages
** Fixed Bridge mode when DNS2 is not available
** Fixed PAP/CHAP username and password fields not saving in interface edit window
** Fixed sending email without secure connection for providers that support such an option
** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
** Fixed Call Utilities Events Log message for reboot rule
** Fixed SMS command validation for no-authorization option
** Fixed MODBUS SMS alarms 'Enable' option saving
** Fixed running RMS with no SIM card inserted issue
** Fixed firmware available on server version checking issue
** Fixed CVE-2020-15078 openvpn vulnerability
** Fixed storage calculation for packages
** SMS Utilities: enhanced service security
** Fixed firmware deletion after leaving the page
** Fixed setup wizard redirect after LAN IP change
** Fixed various validation bugs, typos, option hints & alignments
** Fixed multiple IPv6 configuration field validations
** Fixed PDP logging for Verizon operator
** Added multiwan support for Wireguard default route
** Fixed wireless signal strength display when no clients are connected
** Fixed loss of connectivity for clients when router is in STA+AP mode
** Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
** Fixed Wifi Scanner data not being stored in certain scenarios
** Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
** Fixed Hotspot user group limit not resetting on specified time
** Removed an RMS error message when no Hotspot users were created
** Fixed Hotspot landing page image upload issue
** Fixed relay output value display in I/O Juggler condition page
** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
** Fixed I/O Juggler's incorrect I/O status messages
** Fixed APN migration if APN was selected from APN list on legacy firmware
** Fixed RIP configuration migration from legacy firmware versions
** Fixed Wireguard interface status setting migration from legacy firmware versions
** Fixed default config options for SSH and Web access SMS Utilities rules
===<b>[[Media:RUT2_R_00.07.01.4_WEBUI.bin|RUT2_R_00.07.01.4]]</b> | 2022.02.25===
* <b>Improvements</b>
** Increased Port Forwards rule max name length
** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
*New features:
* <b>Fixes</b>
**Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )
** Added missing bracket to the end of MODBUS messages
** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
** Fixed firewall extra option validation
** Fixed Hotspot enable button validation
** Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
** Changed the logic of uploading files to the modem
** Fixed second mobile interface creation issue
** Fixed usage of custom headers in I/O Juggler HTTP action
** Fixed 'verify' option parsing for I/O Juggler
** Fixed OpenVPN server configuration with password authentication
** Fixed NTP interval length validation
** Fixed network interface enable after Drag & Drop
** Updated NTP client interval to 24h
** Fixed connection to whitelist carriers
** Fixed Passthrough mode when DHCP is disabled
** Fixed 'Deny data roaming' feature
** Fixed mobile blocking dependency on region
** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled
===='''[[Media:RUT2XX R 00.00.482 WEBUI.bin|RUT2XX_R_00.00.482]]''' | 2018.02.22====
===<b>[[Media:RUT2_R_00.07.01.2_WEBUI.bin|RUT2_R_00.07.01.2]]</b> | 2022.01.04===
*Fixes:
* <b>New features</b>
**Updated SMS send satus
** DFOTA modem upgrade system for Quectel modems
* <b>Improvements</b>
** Removed L2TP section title prefixes
{{#ifeq: {{{name}}} | RUT240 | ** Added necessary/forced module firmware updates to handle AT&T network update |}}
* <b>Fixes</b>
** Fixed IPSec crashing issue using mobile
** Fixed FW flashing when chip is in unknown state
** Fixed CPU usage percentage display in the Overview page
** Fixed FOTA timeout issue when server does not respond
** Fixed installation of backup packages
** Fixed mobile data limit display after profile change
** Fixed Bridge mode without multi-APN
** Fixed multi mobile interface checking
** Fixed error handling when the modem is not responding
** Prolonged autoconnect setting timeout
==='''RUT2_R_00.07.01''' | 2021.11.18===
<b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
----
----
* <b>New features</b>
** RUTOS WebUI
*New features:
**Increased CPU clock speed to 400MHz
