Difference between revisions of "Template:Networking rut2xx firmware change log"

From Teltonika Networks Wiki
 
(41 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
===='''[[Media:RUT2XX R 00.01.13.2 WEBUI.bin|RUT2XX_R_00.01.13.2]]''' | 2021.01.12====
+
===<b>[[Media:RUT2_R_00.07.04.2_WEBUI.bin|RUT2_R_00.07.04.2]]</b> | 2023.04.18===
  
−
* Fixes:
+
* <b>New</b>
−
** Added openvpn patch to fix CVE-2020-11810
+
** nftables support
−
** Updated openssl to version 1.1.1i
 
−
** Added dnsmasq patch for CVE-2019-14834
 
−
** Added strongswan patch to fix CVE-2018-10811
 
−
** Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
 
−
** Updated uci to version 2019-09-01
 
−
** Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
 
−
** Fixed factory reset on button that wouldn't perform a complete settings wipe
 
  
−
===='''[[Media:RUT2XX R 00.01.13.1 WEBUI.bin|RUT2XX_R_00.01.13.1]]''' | 2020.11.19====
+
* <b>Improvement</b>
 +
** <b>Network</b>
 +
*** Added PDP profile registry and LTE SMS format functions & management for the Verizon network
 +
*** Improved SIM detection algorithm
 +
*** Improved Multi-APN connection establishment time
 +
** <b>WebUI</b>
 +
*** Improved Overview page performance
 +
** <b>System</b>
 +
*** Changed hostname to router name
 +
*** Updated OpenSSL to version 1.1.1t
 +
*** Updated CA certificates to version 20211016
 +
*** Updated libiwinfo to version 2022-08-19
  
−
* Fixes:
+
* <b>Fix</b>
−
** Randomized the global rate limiter to mitigate "SAD DNS" attack
+
** <b>Network</b>
 +
*** Fixed IPv4, IPv6 mobile connection restarts
 +
*** Fixed operator scanning when mobile interface is disabled
 +
*** Fixed data limit and tracking when software flow offloading is enabled
 +
*** Added network reload call before bringing the mobile interface up
 +
*** Fixed Port-based VLAN ID calculation issue
 +
*** Fixed PDP context authentication when using special characters
 +
** <b>Services</b>
 +
*** Fixed event text for configurable inputs/outputs on I/O Juggler
 +
*** Fixed I/O PIN3 value not changing via MODBUS TCP
 +
*** Added I/O status request error handling in various WebUI pages when the I/O service is booting up
 +
*** Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
 +
*** Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
 +
*** Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
 +
*** Fixed OpenVPN keep alive setting migration issue
 +
*** Fixed PPTP server name setting migration issue
 +
*** Fixed missing WebUI issue caused by Email Relay installation
 +
*** Fixed NTP's Operator Station Synchronization memory leak issue
 +
*** Fixed test email validation
 +
** <b>System</b>
 +
*** Fixed libcares vulnerability CVE-2022-4904
 +
*** Fixed frr vulnerability CVE-2022-37035
 +
*** Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
 +
*** Removed ability for non root users to edit scripts that get executed as root
  
−
===='''[[Media:RUT2XX R 00.01.13 WEBUI.bin|RUT2XX_R_00.01.13]]''' | 2020.10.23====
+
===<b>[[Media:RUT2_R_00.07.04.1_WEBUI.bin|RUT2_R_00.07.04.1]]</b> | 2023.03.24===
  
−
* New features:
+
* <b>Fix</b>
−
** IPsec Xauth
+
** <b>Network</b>
−
** IPsec Passthrough
+
*** Fixed Data Limit issue
  
−
* Improvements:
+
===<b>[[Media:RUT2_R_00.07.04_WEBUI.bin|RUT2_R_00.07.04]]</b> | 2023.03.07===
−
** Added Input/Output default chain policy selections for firewall zones
 
−
** Removed IPv6 related options from Setup Wizard
 
−
** Improved WebUI page loading speed
 
−
** Added a possibility to set MQTT credentials for Modbus Data Sender
 
−
** Added options to keep connection open for Modbus TCP Slave
 
−
** Added TLS certificate options to HTTP(S) data sending for Modbus data
 
−
** Added the option to send SMS messages to multiple numbers on Modbus Alarms
 
−
** Added IPsec aggressive host enable option
 
−
** Expanded IPSec identifier validation
 
−
** Added WiFi SSID field validation
 
−
** Changed IP leasing sequence in mobile Passthrough mode
 
−
** Added SHA512 support
 
−
** Added MD5 & SHA256 checksum calculation for Configuration Backup files
 
−
** Added uploaded package signature verification to Package Manager
 
−
** Added new program that sends and reads GRE Tunnel 'keep alive' packets
 
−
** Changed default WAN Failover values
 
−
** Simplified key combination for opening a new CLI tab
 
  
−
* Fixes:
+
* <b>Improvements</b>
−
** Fixed Modbus MQTT Gateway not responding when connection with broker restarts
+
** <b>WebUI</b>
−
** Fixed Modbus MQTT Gateway not responding when topics gave special characters
+
*** Improved data persistence between page refreshes
−
** Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
+
*** Improved page navigation behavior
−
** Fixed configuration field validations in the Modbus MQTT gateway page
+
*** Improved redirect logic to open configuration edit modals
−
** Fixed MQTT topic validation in Modbus pages
+
*** Updated the 'Status -> Mobile' page
−
** Fixed configuration field validations in the ThingWorx page
+
*** Updated interface card in the Overview page
−
** Fixed Periodic Output Control table layout
+
*** Separated Sent and Received data bars on the chart in the Mobile Usage page
−
** Fixed security related issues to file uploading and HTTP headers
+
** <b>Network</b>
−
** Fixed adding new L2TP and PPTP instances on non-English WebUI
+
*** Added an info message displayed when a faulty SIM card is inserted
−
** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
+
*** Added ResIOT operator's APNs to the APN database
−
** Fixed WiFi SSID string handling in fix_sta_ap.sh
+
*** Improved mobile connection re-establishment after reboot
−
** Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
+
*** Improved mobile connection recovery in cases where it was lost unexpectedly
−
** Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
+
*** Improved 'Deny data roaming' operation when switching between operators
−
** Fixed table design in the System → Administration → Access Control → Safety page
+
*** Changed default WiFi AP cipher to CCMP (AES)
−
** Fixed not setting iptables rules for mobile interface
+
*** Added the logging of MAC addresses rejected by a WiFi AP
−
** Fixed saving APN after firmware upgrade
+
** <b>Services</b>
−
** Fixed default mobile MTU setting
+
*** Added MQTT support to I/O Juggler
−
** Fixed access to LAN page when mobile Bridge mode is enabled
+
*** Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
−
** SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
+
*** Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
−
** Removed IPv6 Subprefix Hint field from the Network → LAN page
+
*** Added argument support for the 'Execute custom script' SMS rule
−
** Fixed DNS push from OpenVPN server
+
*** Added a frequency option 'schedule' Modbus Master
−
** Fixed L2TP over IPsec with Android 10
+
*** Added pagination to Events Reporting overview
−
** Removed crt_rms deprecated service
+
*** Added limit to Events Reporting rule list
−
** Fixed RMS collecting data usage
+
*** Added email logging for Events reporting
−
** Fixed mobile status error for Load Balancing
+
*** 'Sync with browser' button in the NTP page now also synchronizes the time zone
−
** Fixed WAN MAC address value in SMS Utilities command response
+
*** Added a limit of 30 for NTP instances
−
** Fixed answer delay for Call Utilities commands
+
*** Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
−
** Fixed key combination not working
+
*** Added "make before break" option to IPsec configuration
−
** Removed Wireguard from the Network → Status page when this package is not installed
+
*** Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
−
** Changed SNMP RX, TX object types to uint64
+
*** Improved MODBUS Master connection handling to reduce connection count
 +
*** Updated modbus request error messages
 +
*** Added OpenVPN server ip block support
 +
*** Added MQTT support for MODBUS Master alarms
 +
*** Added the possibility to get the device's Ethernet port data via SNMP
 +
** <b>System</b>
 +
*** Updated bash to version 5.1.16
 +
*** Added detailed FW update failure error message to Events Log
 +
*** Improved firmware upload/validation error messages
 +
*** Updated Turkish language support
 +
*** Added protocol column to IP block page
 +
*** Added "vpns.log" file to the Troubleshoot package
 +
*** Added Wireguard tunnel information to the Troubleshoot package
 +
*** Updated default admin group access rights
 +
*** Updated DFOTA notification to show "More info" only when the update is forced
  
−
===='''[[Media:RUT2XX R 00.01.12.3 WEBUI.bin|RUT2XX_R_00.01.12.3]]''' | 2020.06.15====
+
* <b>Fix</b>
 +
** <b>WebUI</b>
 +
*** Fixed MAC address showing on mobile interfaces
 +
*** Fixed mobile cell ID displaying in hexadecimal
 +
*** Fixed mobile data limit card creation in the Overview page
 +
*** Fixed modem widget disappearing from the Overview page
 +
*** Fixed Services page not displaying data after Thingworx package is installed
 +
** <b>Network</b>
 +
*** Fixed interface priority change issue
 +
*** Fixed a Custom Firewall Rule editing issue
 +
*** Fixed DMZ configuration saving while it is disabled
 +
*** Fixed Port Scan script execution failure
 +
*** Fixed Firewall zone duplication issue
 +
*** Fixed call function when VoLTE is disabled
 +
*** Fixed VoLTE control when IMS is not enabled
 +
*** Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
 +
*** Fixed APN authentication when using empty credentials
 +
*** Fixed manual APN selection from list
 +
*** Fixed disabled WiFi interface after factory reset
 +
*** Fixed WiFi interface creation with SAE mixed encryption
 +
** <b>Services</b>
 +
*** Fixed I/O Scheduler overlapping instances issue
 +
*** Fixed Input/Output image pin colors
 +
*** Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
 +
*** Fixed WiFi Hotspot landing page uploaded theme image display
 +
*** Fixed WiFi Hotspot trial user deletion issue
 +
*** Fixed WiFi Hotspot service crash when associated WiFi interface is not up
 +
*** Fixed WiFi Hotspot password request by SMS
 +
*** Fixed WiFi Scanner starting process when the WiFi interface is disabled
 +
*** Added limitations on message size and quantity of email messages in Email to SMS
 +
*** Fixed SMTP HELLO value parsing issue
 +
*** Fixed SMS message window reset button
 +
*** Fixed not being able to save empty 'Message text' field in Auto Reply
 +
*** Fixed multi-part SMS concatenation
 +
*** Fixed multi-part SMS processing
 +
*** Fixed SMS error message on 'Mobile Data Reset' action
 +
*** Fixed Data To Server JSON format %n, %N and %s flag issues
 +
*** Fixed Events Reporting email data clean
 +
*** Fixed Events Reporting missing config selections
 +
*** Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
 +
*** Fixed IPsec instance deletion after removing DMVPN package
 +
*** Fixed IPSec migration via Backup file when DMVPN is configured
 +
*** Fixed IPsec naming issue when the includes an equals sign
 +
*** Fixed L2TP client to use correct interface on failover events
 +
*** Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
 +
*** Fixed MODBUS database size limiting issue
 +
*** Fixed MODBUS MQTT Gateway client ID input
 +
*** Fixed MODBUS TCP Slave RSSI value
 +
*** Fixed MODBUS test button returning errors when several non-connected devices are configured
 +
*** Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
 +
*** Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
 +
*** Fixed OpenVPN Static Key configuration saving by making Static key upload required
 +
*** Fixed OpenVPN TLS client creation issue while LAN is down
 +
*** Fixed Package Manager displaying non-existent packages
 +
*** Fixed Package Manager errors showing up after successful installations
 +
*** Fixed Periodic Reboot entry duplication after a power cycle
 +
*** Fixed PPTP 'Client to client' option not being applied after save
 +
*** Fixed receiving excessive device state emails after a reboot is initialized over RMS
 +
*** Fixed WebUI unavailability after unsuccessful package install
 +
** <b>System</b>
 +
*** Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
 +
*** Fixed bash vulnerability CVE-2022-3715
 +
*** Fixed CGI-IO file download vulnerability CVE-2022-38333
 +
*** Fixed libxml2 vulnerability CVE-2022-40304
 +
*** Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
 +
*** Fixed LED animation during firmware upgrade
 +
*** Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version
 +
*** Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
 +
*** Improved file upload logic
 +
*** Fixed GPL firmware compilation with selected Tinc package
 +
*** Fixed OpenVPN Static Key migration via keep settings issue
 +
*** Fixed NTP time zone name setting migration when the name contains whitespaces
 +
*** Fixed language setting issue
 +
*** Fixed integer validation on industrial services
 +
*** Fixed LED indications when PDP type is IPv6
 +
*** Fixed issues with PDP type and SMS limit period migration via keep settings
  
−
* Improvements:
+
===<b>[[Media:RUT2_R_00.07.03.4_WEBUI.bin|RUT2_R_00.07.03.4]]</b> | 2023.02.09===
−
** Improved RMS connection establishment
 
  
−
===='''[[Media:RUT2XX R 00.01.12.2 WEBUI.bin|RUT2XX_R_00.01.12.2]]''' | 2020.05.08====
+
* <b>Fix</b>
 +
** <b>Network</b>
 +
*** Changed generic modem restart method
 +
*** Fixed mobile page VoLTE switching issues
 +
** <b>Services</b>
 +
*** Sanitized tcpdump storage location
 +
** <b>System</b>
 +
*** Fixed legacy backup upload
 +
*** Fixed upgrade from legacy FW issue with keep settings
  
−
*Fixes:
+
===<b>[[Media:RUT2_R_00.07.03.3_WEBUI.bin|RUT2_R_00.07.03.3]]</b> | 2023.01.25===
−
**Fixed Verizon operator APN configuration
 
  
−
===='''[[Media:RUT2XX R 00.01.12.1 WEBUI.bin|RUT2XX_R_00.01.12.1]]''' | 2020.04.09====
+
* <b>Fix</b>
 +
** <b>Network</b>
 +
*** Fixed disabled WiFi interface after factory reset
  
−
*Fixes:
+
===<b>[[Media:RUT2_R_00.07.03.2_WEBUI.bin|RUT2_R_00.07.03.2]]</b> | 2023.01.13===
−
**Fixed AT&T operator APN
 
  
−
===='''[[Media:RUT2XX R 00.01.12 WEBUI.bin|RUT2XX_R_00.01.12]]''' | 2020.03.24====
+
* <b>New</b>
 +
** <b>System</b>
 +
*** Japanese language
  
−
*New features:
+
* <b>Improvements</b>
−
**Added sms remote configuration option
+
** <b>Network</b>
−
**Added "Enable HTTPS" option in "Access Control" page
+
*** Optimized mobile netifd script installation
−
**Added network frequency band select support for EG25-G modem
 
−
**Added additional service mode options to setup wizard
 
−
**Added Japanese language support
 
−
**Added TLS support to MQTT publisher
 
−
**Added mqtt subscriber support
 
−
**MQTT-Modbus gateway: add MQTT-Modbus gateway support
 
−
**Added ability to install packages stored in backup file
 
−
**Full Unicode SMS support
 
−
**Added time sync from operator station
 
−
**Added ntpclient failover to operator station sync
 
−
*Improvements:
 
−
**Removed wep encryption from WiFi settings
 
−
**Added profile scheduler and default configuration profile
 
−
*Fixes:
 
−
**Fixed TR-069 wan type value
 
−
**removed GRE tunnel option in Events reporting
 
−
**Removed config update from server option
 
−
**Fixed to display the same units of download and upload speeds in the Hotspot settings.
 
−
**Fixed not showing Hotspot users upload/download statistics
 
−
**Added ability to write hyphens to static lease hostname.
 
−
**Fixed RAM usage display
 
−
**Fixed password change URL after firstboot
 
−
**Removed change password error message after firstboot
 
−
**Fixed Web access Control via SMS Utilities
 
−
**Fxed signal strength logging and reporting
 
  
−
===='''[[Media:RUT2XX R 00.01.11.3 WEBUI.bin|RUT2XX_R_00.01.11.3]]''' | 2019.12.04====
+
* <b>Fix</b>
 +
** <b>Network</b>
 +
*** Shortened modem hang monitor timeout
 +
*** Fixed VLAN option setting when changing VLAN ID
  
−
*Fixes:
+
===<b>[[Media:RUT2_R_00.07.03.1_WEBUI.bin|RUT2_R_00.07.03.1]]</b> | 2023.01.03===
−
**Fixed RMS not displaying data when using WiFi
 
−
**Fixed RMS not displaying WAN IP with WAN failover
 
  
−
===='''[[Media:RUT2XX R 00.01.11.2 WEBUI.bin|RUT2XX_R_00.01.11.2]]''' | 2019.11.12====
+
* <b>Improvements</b>
 +
** <b>System</b>
 +
*** Remove front-end certificate validation
 +
** <b>Network</b>
 +
*** Optimized mobile netifd script installation
  
−
*Fixes:
+
* <b>Fix</b>
−
**TR-069 WAN type value fix
+
** <b>Network</b>
−
**RMS batch number instead of product code bug fix
+
*** Fixed modem communication validation
−
**Added missing HMAC options and PKCS12 support to OpenVPN
+
*** Fixed connection establishment in IPv6 only mode
 +
** <b>Services</b>
 +
*** Fixed libxml2 vulnerability CVE-2022-40303
 +
*** Fixed an IPsec Phase one & two setting migration issue
 +
*** Fixed OpenVPN migration from legacy firmwares
 +
*** Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware
 +
** <b>System</b>
 +
*** Fixed JSON key parsing; keys can now be any printable character sequence
 +
*** Fixed memory leak in 'session' module
 +
** <b>WebUI</b>
 +
*** Fixed file pretty name parsing
  
−
===='''[[Media:RUT2XX R 00.01.11.1 WEBUI.bin|RUT2XX_R_00.01.11.1]]''' | 2019.10.21====
+
===<b>[[Media:RUT2_R_00.07.03_WEBUI.bin|RUT2_R_00.07.03]]</b> | 2022.12.16===
  
−
*New features:
+
* <b>New</b>
−
**Auto APN
+
** <b>Network</b>
−
**SMS Utilities Auto APN toggling
+
*** Firewall DMZ page
−
**Operators control & support for JioAPN
+
** <b>Services</b>
−
**Package Manager
+
*** Java package
−
**RMS wireless monitoring
+
*** SFTP server support
−
**Port based VLAN configuration
+
*** OPC UA client
−
**I/O power socket pinout image
+
*** Hotspot registered users management page
−
**VRRP advertisement interval option
+
** <b>System</b>
 +
*** Portuguese language
 +
*** Spanish language
 +
*** Turkish language
 +
*** Email Relay package
 +
** <b>WebUI</b>
 +
*** New Web menu design
  
−
*Improvements:
+
* <b>Improvements</b>
−
**UPnP updated to version 2.1
+
** <b>Network</b>
−
**SIM switching optimizations
+
*** Updated modem handling, attachment, tracking and connection establishment processes
−
**Faster SSH private key generation on first boot
+
*** Added the possibility to select multiple ports in all firewall port fields
−
**Added network, serving and neighbor cell information to Troubleshoot files
+
*** Added 'Match' traffic by type option to firewall traffic rules
 +
*** Added DNS servers and routing table fields to the Wireguard page
 +
*** Improved generating network topology
 +
*** Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
 +
*** Update Firewall Traffic Rules page with DSCP and MARK options
 +
*** Added keepalive, holdtime and connect timers to BGP configuration
 +
*** Added 'Use gateway metric' to network protocols web interface
 +
*** Added more DHCPv6 client events to system log
 +
*** Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
 +
*** Added option to select subnet parameters in mobile Passthrough/Bridge modes
 +
*** Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
 +
*** Added mobile connection state for IPv6
 +
*** Added individual WiFi toggle support
 +
*** Added error message when DFS channel is selected during scanning
 +
** <b>Services</b>
 +
*** Added CSP headers to Hotspot Landing Page
 +
*** Added hotspot user script validation
 +
*** Improved logging of disconnecting client devices
 +
*** Implemented Hotspot 'forget' method, which removes user from DB by MAC
 +
*** Added execute custom script SMS Utilities rule
 +
*** Added receiver and transceiver mode support to SMPP
 +
*** Added timezone synchronization with GSM operator option to NTP Client
 +
*** Updated Zerotier web interface
 +
*** Added IPsec Flush connection option on tunnel initialization
 +
*** Added MODBUS slave regfile validation
 +
*** Added delay, number of timeouts, always reconnect options to MODBUS Master service
 +
*** Added DMVPN Phase 2 and Phase 3 support
 +
*** Added synchronization counting to NTP client
 +
*** Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
 +
*** Added 'Unregister' button to RMS page
 +
*** Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
 +
*** Updated Zerotier package to version 1.10.1
 +
*** Added automatic package removal upon failed installation in Package Manager
 +
*** Added option to describe custom routing table and MTU auto counting to Wireguard VPN
 +
*** Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
 +
*** Updated sqm-scripts to version 1.5.1
 +
*** Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
 +
*** Added monthly reboot option to periodic reboot function
 +
*** Added support for multiple custom option selection to SSTP configuration
 +
*** Added PKCS12 certificate chain support to OpenVPN
 +
*** Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
 +
*** Added QoS selection to MQTT Modbus Gateway
 +
*** Improved RAM usage during upload and installation of packages via Package Manager
 +
*** Updated curl to version 7.86.0
 +
*** Added brute-force prevention measures to Post/Get
 +
*** Added automatic private and public key generation to Wireguard VPN
 +
*** Added multiple Remote source IP support to IPsec
 +
*** Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
 +
*** Added functionality to rotate log file when log is saved to Flash memory
 +
*** Improved performance while fetching packages on repeat visits to the Package Manager page
 +
** <b>System</b>
 +
*** Added a 'test mail' button to the Administration -> Recipients page
 +
*** Added option to clear blocked IPs in the Access Control page after reboot
 +
*** Updated Web Request-Response core logic
 +
*** Added certificate validation to all services that support certificate upload
 +
*** Updated URL protocol validations
 +
*** Removed profile update requests during Save & apply
 +
*** Optimized profile switching logic
 +
** <b>WebUI</b>
 +
*** Added an indication to the Interfaces page that displays when data limit is enabled
 +
*** Added bootloader version to the Device section in the System page
 +
*** Added configuration page shortcuts to Overview page widgets
 +
*** Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
 +
*** Updated network interfaces protocols web interface
 +
*** Updated 404 page to include navigation menu
  
−
*Fixes:
+
* <b>Fix</b>
−
**Wget Reboot minimal interval for action 'reboot' added
+
** <b>Network</b>
−
**Ping Reboot packet size 0 fix
+
*** Fixed jumbo frames MTU issue
−
**Modbus WebUI fixes
+
*** Added the 'Any' choice to source & destination IP address field in NAT rule edit
−
**Modbus WiFi/Mobile on/off fix
+
*** Fixed NHRP web interface issues
−
**SMS Utilities table validation fix
+
*** Fixed WAN interface configuration interfering with LAN
−
**SMS Utilities UCI API fixes
+
*** Fixed mdcollect memory leak issue
−
**SMS Utilities SMS response status fix
+
*** Fixed data limit not resetting properly
−
**SMS-Utilities WiFi/Mobile on/off fix
+
*** Fixed incorrect mobile data usage calculations for multiple day periods
−
**Clarified WebUI options for SMS Forwarding
+
*** Fixed an Auto APN 'Keep settings' issue
−
**Hotspot Statistics tab shows incorrect information fix
+
*** Fixed data counting after mobile data limit has been reached
−
**Hotspot session name validation fix
+
*** Fixed mobile band not setting correctly on first try
−
**Hotspot landing page file upload limits increased
+
*** Fixed incorrect data limit conditions causing unwanted SIM switches
−
**Fixed MAC address clone configuration
+
*** Fixed Passthrough DHCP lease time setting
−
**Fixed sessions table dependency on authentication mode
+
*** Fixed mobile bridge mode issue when no DNS servers are supplied
−
**Events log network type logging on modem service restart fix
+
*** Added new Operator Lists instance name validations
−
**Events Reporting typos that prevented rules being matched fixes
+
*** Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
−
**WAN Failover option disappearing after language change fix
+
*** Fixed wireless interfaces connections not reestablishing after disabling & enabling again
−
**Removed unnecessary fix_sta_ap.sh from syslog messages
+
*** Added wget tracking method to WAN Failover
−
**Removed OpenVPN converting names to hex
+
*** Added interface checks to remove inaccurate Failover events from the Event Log
−
**Added file upload limits
+
*** Fixed Wired WAN connectivity issue when Failover interfaces are disabled
−
**DDNS name validation fix
+
*** Fixed Failover fallback issue
−
**Hostname and router name after backup upload fix
+
** <b>Services</b>
−
**Mobile Data Limit firewall rule init fix
+
*** Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares
−
**Added missing password validation
+
*** Fixed relay state switching
−
**Fixed default VRRP config to follow RFC 2338
+
*** Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
−
**Changed packages names in Package Manager
+
*** Added I/O restart on configuration profile change
−
**Input/Output label & functionality fixes
+
*** Fixed I/O voltage range display for power socket pins
−
**FOTA memory calculation fix
+
*** Fixed SMNP OID for I/O state
−
**Removed "Site Survey" page
+
*** Fixed I/O Juggler SMS text message Save & Apply issue
 +
*** Fixed Hotspot connected user list maximum upload/download value limits
 +
*** Fixed incorrect connected Hotspot user information in RMS JSON
 +
*** Removed unnecessary field from the Port Mirroring page
 +
*** Fixed Hotspot issues related to specific connected phones
 +
*** Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
 +
*** Fixed WiFi Scanner hostname validation issues
 +
*** Fixed UCI SMS Rule return message to display new changes
 +
*** Fixed DNP3 issues when asking for modem temperature
 +
*** Fixed base64 encoding of SMS messages when forwarding to HTTP
 +
*** Fixed SMS sending issues when using multiple APN
 +
*** Added Gateway modem option to IP Block and WoL in SMS Rule edit
 +
*** Fixed unblocking IP addresses with an SMS message
 +
*** Fixed Mobile Utilities page not load properly on some occasions
 +
*** Fixed dbus vulnerability CVE-2020-35512
 +
*** Fixed dnsmasq vulnerability CVE-2022-0934
 +
*** Fixed ext4 vulnerability CVE-2021-3428
 +
*** Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
 +
*** Fixed libxm12 vulnerability CVE-2022-29824
 +
*** Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
 +
*** Fixed MQTT DoS vulnerability CVE-2021-41039
 +
*** Fixed privoxy vulnerability CVE-2021-44542
 +
*** Fixed python3 vulnerability CVE-2022-42919
 +
*** Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
 +
*** Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
 +
*** Fixed switching between RMS connection types while the device is unregistered
 +
*** Fixed reload issues in website blocking feature
 +
*** Fixed IPsec PSK secret required field validation
 +
*** Fixed bandwidth limiting after QoS is enabled for the first time
 +
*** Fixed Dropbear issues when logging in over IPv6
 +
*** Fixed Modbus status in Status -> Services page
 +
*** Fixed Azure IoT Hub application issues when sending large volumes of data
 +
*** Fixed Azure IoT Hub MQTT password validation
 +
*** Fixed DMVPN configuration migration issue
 +
*** Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
 +
*** Fixed DMVPN IPsec connection issue
 +
*** Fixed DMVPN mobile interface 'Keep settings' migration issue
 +
*** Fixed Dynamic DNS long hostname text display issue
 +
*** Fixed Events Reporting memory leak issue
 +
*** Fixed Events Reporting not triggering after flipping an I/O slider
 +
*** Fixed FOTA cron job not starting after factory reset
 +
*** Fixed IPsec local firewall option parsing
 +
*** Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
 +
*** Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
 +
*** Fixed NTP pool hostname validation
 +
*** Fixed OpenVPN certificate remove with Static key and TLS authentication methods
 +
*** Fixed OpenVPN configuration saving issue when using HMAC key authentication
 +
*** Fixed OpenVPN custom dev name transformation to correct format
 +
*** Fixed OpenVPN device name setting logic when uploading config from file
 +
*** Fixed OpenVPN instance status display
 +
*** Fixed OpenVPN TAP (bridged) configuration detection
 +
*** Fixed Qos configuration saving issue occurring after instance deletion
 +
*** Fixed RMS JSON incorrect WAN state and IP information
 +
*** Fixed RMS step access issue in the Setup Wizard page
 +
*** Fixed SNMP issues after reboot while using a Hotspot
 +
*** Fixed SNMP generating MIB files for devices in accordance with to their hardware
 +
*** Fixed SNMP traps not working after SNMP is installed from server
 +
*** Fixed SSTP client route creation issue
 +
*** Fixed UPNP secure mode not turning off issue
 +
*** Fixed Wireguard route to endpoint issue
 +
*** Fixed manual package installation for queued packages
 +
*** Fixed NAT Rules dependency from IPsec web instance
 +
*** Returned usleep utility
 +
*** Updated Australian and South African NordVPN server IP addresses
 +
** <b>System</b>
 +
*** Fixed certificate signing issues
 +
*** Fixed Telnet, CLI access blocking after max invalid tries
 +
*** Fixed FW upgrade with 'Keep settings' while low free space is available
 +
*** Fixed backup file duplication issue
 +
*** Fixed network device handling in system
 +
** <b>WebUI</b>
 +
*** Fixed Hotspot interface display
 +
*** Fixed side widget accessibility during first login
 +
*** Fixed file upload issues
 +
*** Fixed drag and drop issue in the Traffic Rules page
 +
*** Fixed protocol display in the overview of the Interfaces page
 +
*** Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
 +
*** Fixed login errors after browser tab restoration
 +
*** Fixed redirect to newly set IP address after Interface configuration
 +
*** Fixed firmware upgrade verify spinner not closing
 +
*** Fixed an issue with file upload via drag and drop
  
−
===='''[[Media:RUT2XX R 00.01.10 WEBUI.bin|RUT2XX_R_00.01.10]]''' | 2019.07.12====
+
===<b>[[Media:RUT2_R_00.07.02.7_WEBUI.bin|RUT2_R_00.07.02.7]]</b> | 2022.09.12===
  
−
*New features:
+
* <b>Improvements:</b>
−
**New flash validation added
+
** Improved manual-auto connection mode
  
−
*Improvements
+
* <b>Fixes</b>
−
**Added reply after mobileon and mobileoff SMS Utilities commands
+
** Fixed AT command for SMS storage usage
 +
** Fixed CVE-2022-1012 memory leak vulnerability
 +
** Fixed CVE-2022-37434 kernel vulnerability
 +
** Fixed interface option reset after VLAN ID change
 +
** Removed memory leak on port events
 +
** Fixed WiFi Scanner out of range crash when iterating collected data
  
−
*Fixes:
+
===<b>[[Media:RUT2_R_00.07.02.6_WEBUI.bin|RUT2_R_00.07.02.6]]</b> | 2022.08.24===
−
**Firmware upgrade with keep settings fix
 
−
**PPTP fix when upgrading firmware with keep settings
 
−
**Do not autocomplete non-system passwords fix
 
−
**Added validation for 'Service mode' change
 
−
**VRRP template fix
 
−
**Added validation for user group number format
 
−
**SMS Gateway: removed new line add after configuration save
 
−
**Added validation to prevent shell command execution via 'name' field in Wake on LAN
 
−
**NTP time zone options fix
 
−
**MQTT bridge with SSL/TLS connection fix
 
−
**'Use DNS servers advertised by peer' does not save fix
 
−
**'FW update available' fix
 
−
**WAN state and IP print fixes
 
  
−
===='''[[Media:RUT2XX R 00.01.07.1 WEBUI.bin|RUT2XX_R_00.01.07.1]]''' | 2019.06.10====
+
* <b>Improvements:</b>
 +
** Added 'home.vodafone.de' APN
 +
** Improved stability of device information storage
  
−
*Fixes:
+
* <b>Fixes:</b>
−
**Increased RMS HTTP Proxy resource limit
+
** Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
 +
** Fixed Serial-symlink dmesg messages{{#ifeq:{{{name}}}|RUT240|
 +
** Fixed VoLTE management|}}
 +
** Fixed OpenVPN tls-auth and tls-crypt option names
  
−
===='''[[Media:RUT2XX R 00.01.07 WEBUI.bin|RUT2XX_R_00.01.07]]''' | 2019.05.31====
+
===<b>[[Media:RUT2_R_00.07.02.5_WEBUI.bin|RUT2_R_00.07.02.5]]</b> | 2022.08.12===
  
−
*New features:
+
* Improvements:
−
**SNMP: Individual port status added
+
** Updated curl to version 7.83.1
−
**openssl: update to version 1.0.2r
+
** Updated firmware validation error messages
−
**dropbear: update to version 2019.78
+
** Added multiple source IP address support to the Port Forwards page
−
**busybox: update to version 1.30.1
+
** Increased custom APN Username & Password field maximum length to 64 symbols
−
**uci: update to version 2018-08-11
+
** Added auto switch to modem's SMS storage when SIM card storage doesn't exist
−
**ubus: update to version 2018-10-06
+
** Improved mobile connection status handling
−
**ubox: update to version 2019-04-07
+
** Added CSP headers Hotspot WebUI landing page
−
**libubox: update to version 2019-02-27
 
−
**MQTT: added MQTT support
 
−
**WebUI: add additional band support for EC25
 
−
**UPnP: UPnP added
 
−
**WebUI: add events reporting and reporting configuration support
 
−
**Flash: Add XT25F128B flash support
 
−
**Strongswan: Custom option added
 
−
**WebUI: upload backup from lower firmware version support
 
  
−
*Fixes:
+
* Fixes:
−
**Wireless: Station availability when two or more Access Points are created fix
+
** Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
−
**Mobile Graphs: Color and line adjustments
+
** Fixed CVE-2022-30065 busybox vulnerability
−
**WebUI: Overview->Network->Topology: WAN Failover redirection fix
+
** Fixed file upload path traversal
−
**Strongswan: Shared-keys fix
+
** Removed Data to Server limit to proccess less than 10 instances
−
**WebUI: fix input validation issues
+
** Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
−
**Mobile traffic: graph fixes
+
** Fixed OpenVPN dev setting logic
−
**WebUI: fix LEDs Indication setting
+
** Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
−
**QMI2: set 1st context to IPv4
+
** Fixed MAC and leasetime setting for Bridge & Passthrough modes
−
**Hotspot: Restrict internet access fix
+
** Fixed modal tabs navigation when editing wireless interface with non-english languages
−
**Hotspot: 'Invalid' prompt after deleting session fix
 
−
**IPSec: No shared key validation added
 
−
**Email-to-SMS: longer SMS fix
 
−
**IPSec: Allow WebUI access with HTTPS fix
 
−
**RMS: fixed disable on sysupgrade with keep settings
 
−
**WebUI: LEDs Indication hint text fix
 
−
**IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
 
−
**SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
 
−
**Wireless: Regulatory domain and channel change fix
 
−
**SMS-Management: Error message after successful SMS send fix
 
−
**Services: SNMP Trap redirection fix
 
−
**Periodic Control: Rule addition in Chromium fix
 
−
**Setup Wizard: Dialing number disappearing fix
 
−
**WAN: After interface edit, redirect back to main WAN window fix
 
−
**SNMP: Teltonika MIB file fix
 
−
**rms_mqtt: HTTPs proxy fix
 
−
**rms_json: Fixed WAN State and WAN IP
 
−
**Wireless: STA connection loss fix
 
−
**QoS: Speed limitation fix
 
−
**Stunnel: Removed unnecessay WebUI options, added validation.
 
−
**Port Scan Prevention: Disable fix
 
−
**Port Scan Prevention: Warning message for remote access added
 
−
**ledman: fixed led issue when there is no connection
 
−
**ledman: fixed led issue when rebooting router with reset button
 
−
**Wireless: Channel frequency dispaly fix
 
−
**Administration: RMS 'infobox' fix
 
−
**Setup Wizard: RMS 'infobox' fix
 
−
**Setup Wizard: Validation and redirection fixes
 
−
**VRRP: updated to 1.15 version
 
−
**LAN: Static leases fix
 
−
**Backup: Redirection to 127.0.0.1 after backup load fix
 
−
**Network: 'Use WAN as LAN' availability fix
 
−
**WebUI: WAN as LAN when using main WAN WIFI fix
 
−
**Network: Delete static protocol options after change to DHCP fix
 
−
**L2TP and PPTP: updated services
 
  
−
===='''[[Media:RUT2XX R 00.01.06.1 WEBUI.bin|RUT2XX_R_00.01.06.1]]''' | 2019.03.18====
+
===<b>[[Media:RUT2_R_00.07.02.4_WEBUI.bin|RUT2_R_00.07.02.4]]</b> | 2022.07.20===
  
−
*New features:
+
* Improvements:
−
**Added 'More' SMS Utilities rule
+
** Added default password change warning message before firmware downgrade
−
 
+
** Extended time period for device to make connection to operator
−
*Fixes:
+
** Reduced the number of modem reboots when changing mobile settings
−
**RMS reconnect issue fix
+
** Reduced excessive log output when no SIM card is inserted
−
**Hotspot authentication mode change fix
+
** Added modem restart prevention on modem init
−
**Overview widget fixes
+
** Added disable RPLMN option in the SIM section of the SIM card config
−
**Connection uptime widget fix
 
−
**SMS Management inbox read fix
 
−
**Wireless scan fix
 
−
**SSTP service update
 
−
**SMS-Utilities: various functionality fixes
 
−
**Restore-Point: Removed the ability to load restore points of a different router
 
−
**VLAN: LAN Network configuration backup fix
 
−
**Maximum length SMS message send fix
 
−
**Long SMS messages stretch out WebUI fix
 
−
**Ping Reboot: reboots after service is disabled fix
 
−
**Removed warning message when scanning for WiFi STA
 
−
**Setup Wizard WiFi channel select custom option remove fix
 
−
**Call Utilities: double zero in front of the number fix
 
−
**Setup Wizard: you cannot procceed with setup if you disable DHCP fix
 
−
**Restore to default percentage counting fix
 
−
**WoL: Use WAN as LAN fix
 
−
**Network Operators: Typo fix
 
−
**Events log: Typo fixes
 
−
**Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
 
−
**Hotspot: configuration saves without advertisement address fix
 
−
**WiFi channel frequency display fix
 
−
**Mobile Traffic: daily statistics show wrong time fix
 
−
**STunnel text display fix
 
−
**IPSec text display fix
 
−
**OpenVPN remove TLS clients in TAP mode fix
 
−
**Hotspot: Tab placement fix
 
−
**Overview: Text changes
 
−
**SMS-Utilities: 'uci show' fix
 
−
**WebUI: added connection band info to mobile status page
 
−
**Mobile: fix for LTE band default value for different regions
 
−
**RMS: fixed logread messages
 
−
**I/O: fixed output state labels
 
  
−
===='''[[Media:RUT2XX R 00.01.05.1 WEBUI.bin|RUT2XX_R_00.01.05.1]]''' | 2019.02.22====
+
* Fixes:
 +
** Fixed CVE-2022-2068 vulnerability
 +
** Disabled autoconnect on stop-network call
 +
** Fixed Hotspot login via landing page issue
  
−
*New features:
+
===<b>[[Media:RUT2_R_00.07.02.2_WEBUI.bin|RUT2_R_00.07.02.2]]</b> | 2022.06.27===
−
**Added Wake on LAN functionality
 
−
**Added Wake on LAN SMS Utilities rule
 
−
**Added STunnel feature to VPN services
 
  
−
*Improvements:
+
* Improvements:
−
**Added every WAN interface selection to Qos
+
** Added ping to DNS IPv6 support
−
**Add modem restart option to Periodic Reboot
+
** Added modem reset to default state after device FW upgrade
−
**Updated curl to version 7.64.0
+
** Modem init now checks NVRAM sensitive commands before setting
−
**Updated OpenSSL to version 1.0.2q
+
** GSM output was made consistent
 +
** Updated FSTools package to version 2022-05-03
 +
** Added security headers to web requests
  
−
*Fixes:
+
* Fixes:
−
**L2TP network restart after connection loss fix
+
** Fixed CVE-2019-12900 libbz2 vulnerability
−
**OpenVPN service restart when TLS-Password is changed fix
+
** Fixed behavior of some gsmctl commands
−
**Mobile IP and gateway fix
+
** Fixed CVE-2022-23303 hostapd vulnerability
−
**Overview OpenVPN widget display fix
+
** Fixed CVE-2022-29581 Linux kernel vulnerability
−
**IPSec psk_key save after older firmware upgrade fix
+
** Fixed CVE-2022-29458 ncurses vulnerability
−
**Configuration backup and firmware upgrade stuck on the 'downloading' page fix
+
** Fixed CVE-2022-1292 c_rehash script command injection vulnerability
−
**SNMP memory leak fix
+
** Fixed band locking issue
−
**Mobile data limit keep limit after firmware upgrade with keep settings fix
+
** Fixed race condition for wireless configuration initialization
−
**Remote access information fix
+
** Fixed operator control issue
−
**L2TP IP range change fix
 
−
**Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
 
−
**Hotspot firewall rules fix
 
−
**Data-only SIM fix
 
−
**Wireless Station and Access Point fixes
 
−
**Deleted unnecessary IPsec keep alive option
 
−
**Fixed GRE Tunnel connection
 
−
**Removed NOTRACK target from firewall rules
 
−
**WAN IP not showing on Login page fix
 
−
**DDNS process kill fix
 
−
**WAN selected as LAN fix
 
−
**IPSec restart when backup mobile fails fix
 
−
**RMS memory usage fix
 
−
**CLI Connect button fix
 
−
**Mobile traffic counter resetting fix
 
−
**Multiple OpenVPN related fixes
 
−
**Ping Reboot fix
 
  
−
===='''[[Media:RUT2XX R 00.01.04.2 WEBUI.bin|RUT2XX_R_00.01.04.2]]''' | 2018.12.20====
+
===<b>[[Media:RUT2_R_00.07.02.1_WEBUI.bin|RUT2_R_00.07.02.1]]</b> | 2022.06.06===
  
−
*Fixes:
+
* Improvements:
−
**SSH security fix
+
** Improved GSM related messages in Troubleshoot logs
−
**Mobile page fix
 
  
−
===='''[[Media:RUT2XX R 00.01.04.1 WEBUI.bin|RUT2XX_R_00.01.04.1]]''' | 2018.11.15====
+
* Fixes:
−
 
+
** Fixed IGMP Proxy menu item not appearing after package installation
−
 
+
** Fixed default mobile network configuration generation
−
*New features:
+
** Fixed MODBUS write requests and Mobile Utils option setting
−
**Added NTP server, force servers option for ntpclient
 
−
**Added selectable network band support
 
−
**Added SSTP
 
−
**Replace bird routing package with quagga package
 
−
**Added WiFi MAC Filter address range support
 
−
**Changed RMS communication protocol to use MQTT instead of OpenVPN
 
−
**Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm
 
−
 
 
−
*Improvements
 
−
**Updated mobile operator database
 
−
**Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
 
−
**Sensitive information (usernames and passwords) removed from router's Troubleshoot file
 
−
**Added warnings to Call Utilities when on 4G-only mode
 
  
−
*Fixes:
+
===<b>[[Media:RUT2_R_00.07.02_WEBUI.bin|RUT2_R_00.07.02]]</b> | 2022.05.23===
−
**Fixed multiwan restart sequence issues causing VPN instabilities
 
−
**Static Routes fix
 
−
**WiFi updates and security fixes
 
−
**Minor improvements and bug fixes for operator selection
 
−
**SNMP MIB values and file format fix
 
−
**SNMP Hotspot and serial values fix
 
−
**Redirect to login page after factory reset fix
 
−
**IPsec init script fix
 
−
**Overview WiFi widget fix
 
−
**Modbus WiFi enable/disable fix
 
−
**Modbus APN write and memory leak fixes
 
−
**JavaScript code multiplication fix
 
−
**DHCP server lease time validation update fix
 
−
**Hang up on watchdog reset fix
 
−
**Overview mobile WAN IP display fix
 
−
**curl: update to 7.62.0
 
−
**OpenSSL: update to 1.0.2p
 
−
**cacert: update to 2018-10-17
 
−
**arptables segmentation fault fix
 
−
**quectel-CM: updated to latest version
 
−
**GRE Tunnel delete after button press fix
 
−
**Update Teltonika contact address in Licenses page
 
−
**Disabled passthrough and bridge selection when multiwan is enabled
 
−
**Fixed lua dispatcher error after reboot
 
−
**Fixed multiwan metrics and priorities
 
−
**SMS Utilities SMS status WAN IP with multiwan fix
 
  
−
===='''[[Media:RUT2XX R 00.01.03.5 WEBUI.bin|RUT2XX_R_00.01.03.5]]''' | 2018.10.23====
+
* <b>New features</b>
 +
** Overview side widget
 +
** IGMP Proxy
 +
** Privileged Access Management (PAM)
 +
** AWS Greengrass support
 +
** HTTPS certificate and key upload feature
 +
** SSH public keys edit box
 +
** License page
 +
** DNP3 data for Data to Server
  
−
*Fixes:
+
* <b>Improvements</b>
−
**VPN shutdown at delete fix
+
** Updated busybox to version: 1.34.1
−
**PPTP default gateway set and delete fix
+
** Updated curl to version 7.79.1
−
**OpenVPN status fix
+
** Added iptables filter package for string filtering
−
**OpenVPN configuration section name compatibility fix
+
** Added CHAP authentication for L2TP VPN
−
**IPsec redirect after save fix
+
** Added IPv6 support for L2TPv3 VPN
−
**Overview VRRP widget status fix
+
** Added EAP-MSCHAPV2 authentication method for IPsec VPN
−
**Hotspot start after reboot fix
+
** Added IPv6 support to Auto Reboot
−
**Added default LAN IPv6 address
+
** Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
−
**Overview WAN wiki link fix
+
** Updated SNMP version 5.9.1
−
**Hotspot overview fix
+
** Added OpenSSL authentication options to SNMPv3
−
**Mobile data counter reset fix
+
** Added support for OSPF redistribution options and OSPF neighbors
 +
** Added password field to BGP Peers page
 +
** Extended BGP "AS" field validation to accept integers up to 4294967295
 +
** Added "DHE+RSA" to OpenVPN cipher selections
 +
** Increased OpenVPN max password length from 128 bytes to 512 bytes
 +
** Made HMAC key direction initial value dependent on the role of the instance (client or server)
 +
** Made HMAC key and HMAC authentication key upload fields required
 +
** Added DES to IPsec encryption algorithms selections
 +
** Added special character support for CHAP secrets
 +
** Added validation requirements for PPTP user list username field
 +
** Added option to manually enter Public key in Wireguard configuration
 +
** Made generating Wireguard  keys possible only while in auto mode
 +
** Added Events Log database to troubleshoot archive
 +
** Added RFC1918 filter field
 +
** Added the possibility to unblock multiple blocked devices at once
 +
** Added 'Port' column to blocked login attempts table
 +
** Added Speedtest server refresh
 +
** Updated Speedtest server list
 +
** Added asterisk option to Site Blocking
 +
** Added MD5 and SHA256 checksums to package validation page
 +
** Changed certificate requirements to only require client key file if client certificate is used
 +
** Added pagination and data retention between table pages
 +
** Added pagination functionality to tables when there are more than 10 records
 +
** Improved table sorting by saving user provided sort settings in the browser
 +
** Improved drag and drop functionality
 +
** Added the possibility to drag and drop files onto upload components
 +
** Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
 +
** Added 'Strict-Transport-Security' response header for HTTPS
 +
** Added 'breadcrumbs' to modal windows
 +
** Improved initial WebUI loading after login
 +
** Added mobile bytes sent and bytes received SNMP OIDs
 +
** Added mobile LED turn off feature ('System -> Administration'  page)
 +
** Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
 +
** Updated mobile usage data point calculation logic
 +
** Added the possibility to manually enter operator number
 +
** Improved obtain mobile cell ID process
 +
** Added modem restart if SIM card is removed during APN database fetching process
 +
** Added unauthorized call logging
 +
** Added space character support in SMS commands
 +
** Disabled SMS modem storage configuration form when SIM is not inserted
 +
** Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
 +
** Added external modem SMS limit Overview card and widget
 +
** Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
 +
** Added duplicate value check for list configuration options
 +
** Changed mobile card instance design
 +
** Fixed 'Mobile Data usage reset' SMS rule
 +
** Fixed the default state parameter of SMS list POST/GET command
 +
** Added Hotspot configuration profiles
 +
** Added local Hotspot user password hashing
 +
** Added Hotspot password encoding option
 +
** Improved Hotspot related firewall rule setting
 +
** Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
 +
** Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
 +
** Added ubus support to Hotspot
 +
** Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
 +
** Added I/O SNMP trap
 +
** Added ISO 8601 time format to I/O Juggler's '%ts' parameter
 +
** Added device name parameter '%pc' to I/O Juggler
 +
** Added PPPoE VLAN priority support
 +
** Made VRRP ping section dependent on main instance
 +
** Added 'WAN to LAN' switch
  
−
===='''[[Media:RUT2XX R 00.01.03.2 WEBUI.bin|RUT2XX_R_00.01.03.2]]''' | 2018.09.05====
+
* <b>Fixes</b>
 +
** Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
 +
** Fixed CVE-2022-28391 busybox vulnerability
 +
** Fixed CVE-2018-16789 shellinabox vulnerability
 +
** Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
 +
** Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
 +
** Fixed zlib backport security issue
 +
** Fixed Wireguard firewall zone assignment
 +
** Fixed queued packages disappearing from list after FW upgrade with keep settings
 +
** Fixed error message display for multiple input validation rules
 +
** Fixed incorrect DHCP validation range for start and limit fields
 +
** Removed 'Bring up on boot' option from network interface configuration pages
 +
** Fixed coma-separated DHCP options disappearing after save
 +
** Fixed exclude and listen interfaces
 +
** Fixed 'Use broadcast flag' option saving
 +
** Fixed firewall zone assignment when creating new interfaces
 +
** Fixed OpenVPN 'Netmask' and 'IP address' field validations
 +
** Fixed OpenVPN TAP configuration saving issue
 +
** Fixed OpenVPN switching to TUN mode when uploading a configuration from file
 +
** Fixed dynamic BGP route state display
 +
** Fixed BGP peer enable in edit page
 +
** Fixed issue when no L2TP client instance could be bound to IPsec
 +
** Fixed firewall rule and zone behavior related to config section creation
 +
** Added default value for L2TPv3 netmask, which is now written to config after save
 +
** Fixed passthrough option saving to IPsec file
 +
** Fixed DMVPN issue where instance configuration could not be saved
 +
** Fixed Wireguard peer could not be saved issue
 +
** Fixed NTP client time synchronization after factory reset
 +
** Fixed device time display with selected time zone
 +
** Fixed MODBUS TCP indexation missing bracket issue
 +
** Fixed initial MODBUS TCP request count validation
 +
** Fixed PIN 3/4 direction switching over MODBUS TCP
 +
** Fixed MODBUS data to MQTT socket closing issue when connection fails
 +
** Fixed MODBUS alarm configuration deletion
 +
** Fixed DNP3 master not working after FW upgrade with 'keep settings'
 +
** Fixed DNP outstation not returning error messages
 +
** Added missing SNMP objects: mobile IP, data sent/received today
 +
** Fixed MQTT Publisher 'Remote address' field validation
 +
** Fixed long interface name support for Azure IoT Hub
 +
** Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
 +
** Fixed missing sent/received data issue
 +
** Fixed URL input field length validation
 +
** Fixed admin login issue after upload of backup from a device with older firmware versions
 +
** Fixed MAC address formatting in Events reporting messages
 +
** Fixed Events reporting DHCP lease message spam, when no new lease is added
 +
** Fixed logging crashing after downloading Troubleshoot file
 +
** Made Wake on LAN visible only on devices with Ethernet ports
 +
** Fixed Traffic log file transfer to FTP server
 +
** Fixed Web Filter service reloading after a host list file is uploaded
 +
** Fixed access denied messages when sending JSON-RPC requests from root user
 +
** Fixed error message display about duplicated intervals in Profile scheduler
 +
** Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
 +
** Corrected OSPF Routing card values, value positions and names
 +
** Fixed global secret instances not being removed when there are no IPsec instances
 +
** Fixed uploaded file remove icon not staying in position on hover
 +
** Fixed Overview card collapse issue that made it unresponsive after too many clicks
 +
** Removed WAN6 interface from the Overview page
 +
** Fixed mobile IPv6 display in Events Reporting status messages
 +
** Fixed Bridge mode when DNS2 is not available
 +
** Fixed PAP/CHAP username and password fields not saving in interface edit window
 +
** Fixed sending email without secure connection for providers that support such an option
 +
** Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
 +
** Fixed Call Utilities Events Log message for reboot rule
 +
** Fixed SMS command validation for no-authorization option
 +
** Fixed MODBUS SMS alarms 'Enable' option saving
 +
** Fixed running RMS with no SIM card inserted issue
 +
** Fixed firmware available on server version checking issue
 +
** Fixed CVE-2020-15078 openvpn vulnerability
 +
** Fixed storage calculation for packages
 +
** SMS Utilities: enhanced service security
 +
** Fixed firmware deletion after leaving the page
 +
** Fixed setup wizard redirect after LAN IP change
 +
** Fixed various validation bugs, typos, option hints & alignments
 +
** Fixed multiple IPv6 configuration field validations
 +
** Fixed PDP logging for Verizon operator
 +
** Added multiwan support for Wireguard default route
 +
** Fixed wireless signal strength display when no clients are connected
 +
** Fixed loss of connectivity for clients when router is in STA+AP mode
 +
** Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
 +
** Fixed Wifi Scanner data not being stored in certain scenarios
 +
** Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
 +
** Fixed Hotspot user group limit not resetting on specified time
 +
** Removed an RMS error message when no Hotspot users were created
 +
** Fixed Hotspot landing page image upload issue
 +
** Fixed relay output value display in I/O Juggler condition page
 +
** Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
 +
** Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
 +
** Fixed I/O Juggler's incorrect I/O status messages
 +
** Fixed APN migration if APN was selected from APN list on legacy firmware
 +
** Fixed RIP configuration migration from legacy firmware versions
 +
** Fixed Wireguard interface status setting migration from legacy firmware versions
 +
** Fixed default config options for SSH and Web access SMS Utilities rules
  
−
*New features:
+
===<b>[[Media:RUT2_R_00.07.01.4_WEBUI.bin|RUT2_R_00.07.01.4]]</b> | 2022.02.25===
−
**Added operators control with white/black list feature
 
−
**Added Administration -> Root CA page
 
  
−
*Improvements:
+
* <b>Improvements</b>
−
**Added many security updates
+
** Increased Port Forwards rule max name length
−
**Added firmware update information
+
** Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
−
**Added CellID information to Troubleshoot file
 
  
−
*Fixes:
+
* <b>Fixes</b>
−
**GPL: compilation fixes
+
** Added missing bracket to the end of MODBUS messages
−
**Configuration restore fix
+
** Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
−
**Disabled Hotspot users' ability to reach LAN devices and WebUI
+
** Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
−
**Port Forwarding IP validation fix
+
** Fixed firewall extra option validation
−
**System -> Administration -> Overview page loading fix when VPN configuration exists
+
** Fixed Hotspot enable button validation
−
**Some minor DHCP display fixes
+
** Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
−
**Call Utilities reboot action partial message fix
+
** Changed the logic of uploading files to the modem
−
**DDNS IP source change and added time selection
+
** Fixed second mobile interface creation issue
−
**OpenVPN service fixes
+
** Fixed usage of custom headers in I/O Juggler HTTP action
−
**Some minor QoS fixes
+
** Fixed 'verify' option parsing for I/O Juggler
−
**Some minor OpenVPN fixes
+
** Fixed OpenVPN server configuration with password authentication
−
**Configuration Wizard: LAN page redirect fix
+
** Fixed NTP interval length validation
−
**Overview WAN IP fix
+
** Fixed network interface enable after Drag & Drop
−
**Added Redirect to HTTPS information
+
** Updated NTP client interval to 24h
−
**Troubleshoot TCPdump fix
+
** Fixed connection to whitelist carriers
−
**Changed 'Backup WAN' to 'WAN Failover'
+
** Fixed Passthrough mode when DHCP is disabled
−
**WebUI: language translation in some pages fix
+
** Fixed 'Deny data roaming' feature
−
**Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
+
** Fixed mobile blocking dependency on region
−
**Overview VPN widget IP fix
+
** Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled
  
−
===='''[[Media:RUT2XX R 00.01.02.6 WEBUI.bin|RUT2XX_R_00.01.02.6]]''' | 2018.08.22====
+
===<b>[[Media:RUT2_R_00.07.01.2_WEBUI.bin|RUT2_R_00.07.01.2]]</b> | 2022.01.04===
  
−
*Fixes:
+
* <b>New features</b>
−
**Fixed GPL Readme
+
** DFOTA modem upgrade system for Quectel modems
−
**Fixed JavaScript password validation
 
  
−
===='''[[Media:RUT2XX R 00.01.02.3 WEBUI.bin|RUT2XX_R_00.01.02.3]]''' | 2018.06.08====
+
* <b>Improvements</b>
 +
** Removed L2TP section title prefixes
 +
{{#ifeq: {{{name}}} | RUT240 | ** Added necessary/forced module firmware updates to handle AT&T network update |}}
 +
* <b>Fixes</b>
 +
** Fixed IPSec crashing issue using mobile
 +
** Fixed FW flashing when chip is in unknown state
 +
** Fixed CPU usage percentage display in the Overview page
 +
** Fixed FOTA timeout issue when server does not respond
 +
** Fixed installation of backup packages
 +
** Fixed mobile data limit display after profile change
 +
** Fixed Bridge mode without multi-APN
 +
** Fixed multi mobile interface checking
 +
** Fixed error handling when the modem is not responding
 +
** Prolonged autoconnect setting timeout
  
−
*Fixes:
+
==='''RUT2_R_00.07.01''' | 2021.11.18===
−
**Fixed RMS status in overview page
+
<b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
−
**Fixed LTE signal strength graph
 
−
 
 
−
===='''[[Media:RUT2XX R 00.01.01.4 WEBUI.bin|RUT2XX_R_00.01.01.4]]''' | 2018.05.16====
 
−
 
 
−
*New features:
 
−
**Added DHCP Force option
 
−
**Added RMS connection page to Setup Wizard
 
−
**Added forced password change
 
−
 
 
−
*Improvements:
 
−
**Updated Overview widget icons, added Teltonika Wiki links
 
−
**Added private key decryption function to OpenVPN client configuration
 
−
**Added additional DPD options
 
−
 
 
−
*Fixes:
 
−
**Fixed Wget reboot URL datatype
 
−
**WebUI: SSH access status fix
 
−
**Added special symbols exception to SMS-Forwarding
 
−
**Added missing Events Reporting config for SMS-Utilities
 
−
**PPP enable/disable bug fix
 
−
**Multiple Call Utilities fixes
 
−
**SMS event queries fix
 
−
**Removed unnecessary sim_switch message text
 
−
**Some SSH security fixes
 
−
**Updated Modbus sources and coding table
 
−
**Multiple OpenVPN bug fixes
 
−
**Graphs/Signal strength fix when using HSDPA+HSUPA network type
 
−
**Fixed VLAN DHCP leasing
 
−
**Administration password change fix
 
−
**STA mode logic changed
 
−
**Hotspot bandwith limit fix
 
−
**Moved IP alias gateway to advanced features
 
−
**Administration -> Overview fix
 
−
**Factory reset fix due to mobile connection problems
 
−
 
 
−
===='''[[Media:RUT2XX R 00.01.00 WEBUI.bin|RUT2XX_R_00.01.00]]''' | 2018.03.19====
 
−
 
 
−
*Improvements:
 
−
**Added hostname validation for Wget Reboot
 
−
**New versioning logic
 
−
 
 
−
*Fixes:
 
−
**Output ON/OFF fix
 
−
**Firmware Upgrade fix
 
−
**SSH authentication logging fix
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.553 WEBUI.bin|RUT2XX_R_00.00.553]]''' | 2018.03.09====
 
−
 
 
−
*New features:
 
−
**Added Redirect LAN to GRE function
 
−
 
 
−
*Fixes:
 
−
**Mobile Data Limit fixes
 
−
**User's password removed from users table
 
−
**Firmware upgrade message fixed
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.539 WEBUI.bin|RUT2XX_R_00.00.539]]''' | 2018.03.01====
 
−
 
 
−
*Fixes:
 
−
**Minor Openvpn functionality fixes
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.486 WEBUI.bin|RUT2XX_R_00.00.486]]''' | 2018.02.27====
 
−
 
 
−
*New features:
 
−
**Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.482 WEBUI.bin|RUT2XX_R_00.00.482]]''' | 2018.02.22====
 
−
 
 
−
*Fixes:
 
−
**Updated SMS send satus
 
−
**Added Modbus enable check-box
 
−
**Added firewall rule so the router would be reachable from WAN when access control is enabled
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.474 WEBUI.bin|RUT2XX_R_00.00.474]]''' | 2018.02.20====
 
−
 
 
−
*Improvements:
 
−
**Added download MIBS button to SNMP page
 
−
 
 
−
*Fixes:
 
−
**Fixed style for VPN service pages, Modbus page
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.388 WEBUI.bin|RUT2XX_R_00.00.388]]''' | 2018.02.19====
 
−
 
 
−
*New features:
 
−
**Added Relayd function that can make the router act like a wireless range extender
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.382 WEBUI.bin|RUT2XX_R_00.00.382]]''' | 2018.02.06====
 
−
 
 
−
*Fixes:
 
−
**Fixed Wi-Fi logging to FTP function
 
−
**Fixed site blocking file parsing
 
−
**System Information texts fix
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.377 WEBUI.bin|RUT2XX_R_00.00.377]]''' | 2018.01.31====
 
−
 
 
−
*New features:
 
−
**IPsec: added Transport mode, Firewall options, local IP management options
 
−
 
 
−
*Improvements:
 
−
**Moved Disable NAT flags from VPN to Firewall page
 
−
 
 
−
*Fixes:
 
−
**Fixed Firewall config for hotspot interface assignment
 
−
**DMZ rule position fix
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.372 WEBUI.bin|RUT2XX_R_00.00.372]]''' | 2018.01.16====
 
−
 
 
−
*Improvements:
 
−
**Added binero.se to DDNS service providers list
 
−
**Added some additional SMS Utilities hints
 
−
**Added support for changing Wireless SSID name from branding script
 
−
**Improved Email to SMS function
 
−
 
 
−
*Fixes:
 
−
**WAN port status display fix
 
−
**Fixed SMS Utilities Write to config bug when sending mobileoff message
 
−
**Whitelist blocking fix in Site Blocking
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.355 WEBUI.bin|RUT2XX_R_00.00.355]]''' | 2018.01.05====
 
−
 
 
−
*New features:
 
−
**Added WPA-Enterprise encryption type support for Wi-Fi Access Points
 
−
**Added Email To SMS, SMS Forwarding functions
 
−
**Added Wget Reboot function
 
−
 
 
−
*Improvements:
 
−
**Updated fw upgrade validation for future firmwares
 
−
 
 
−
*Fixes:
 
−
**Fixed bug of not being able to use hostnames as a destination for Ping Reboot
 
−
**Input/Output Scheduler backup bug fix
 
−
**System->Administration page style fixes
 
−
**Removed wifid due to security issues
 
−
**Configuration Backup bug fixes
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.339 WEBUI.bin|RUT2XX_R_00.00.339]]''' | 2018.01.02====
 
−
 
 
−
*New features:
 
−
**Added IPsec option for WebUI access through tunnel
 
−
**Added Reset button custom hold time configuration
 
−
 
 
−
*Fixes:
 
−
**Minor Mobile Data Limit bug fix
 
−
**Renamed mibs file to TLT-MIB.txt
 
−
**Temperature display fix
 
−
**Added Async Control Character Maps
 
−
**Fixed minor grammatical errors in the WebUI
 
−
**OpenVPN hints fix
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.312 WEBUI.bin|RUT2XX_R_00.00.312]]''' | 2017.12.08====
 
−
 
 
−
*Fixes:
 
−
**Some minor PPTP Server and Client functionality fixes
 
−
**Added fix to PPP Connection Type due to disconnecting mobile connection
 
−
**Real traffic fix
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.307 WEBUI.bin|RUT2XX_R_00.00.307]]''' | 2017.12.05====
 
−
 
 
−
*New features:
 
−
**Added Hotspot configuration profiles
 
−
 
 
−
*Improvements:
 
−
**Added custom redirect address
 
−
**Added troubleshoot file download protection
 
−
 
 
−
*Fixes:
 
−
**Some minor Hotspot functionality fixes
 
−
**Mobile data logging fix
 
−
**Some minor Dynamic DNS functionality fixes
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.296 WEBUI.bin|RUT2XX_R_00.00.296]]''' | 2017.11.23====
 
−
 
 
−
*Improvements:
 
−
**SMS Utilities fw_upgrade rule now works with Keep Settings
 
−
 
 
−
*Fixes:
 
−
**Minor Reregister function fix
 
−
**Use IPv4 only fix
 
−
**Minor mobile interface fix
 
−
**Some minor Site Blocking fixes
 
−
**Connect to hidden WiFi AP fix
 
−
**Multiwan metric change fix for RUT230
 
−
 
 
−
===='''[[Media:RUT2XX R 00.00.284 WEBUI.bin|RUT2XX_R_00.00.284]]''' | 2017.11.03====
 
−
 
 
−
*Improvements:
 
−
**Improved Mobile Data Limit functionality
 
−
**Improved Load Balancing functionality
 
−
<!--
 
−
 
 
−
===Bootloader Change Log===
 
 
----
 
----
−
'''NOTE''': there are two Bootloader files in the archive. Which file should be used depends on circumstances. More details on this and how to upgrade the Bootloader to a newer version can be found '''[[RUT2xx Bootloader Upgrade|here]].'''
+
* <b>New features</b>
−
 
+
** RUTOS WebUI
−
===='''[[Media:U-boot_mod_tlt_rut200_3.2.2.zip|RUT2XX Bootloader version 3.2.2]]''' | 2020.03.06====
 
−
 
 
−
*Improvements:
 
−
**Updated links to teltonika-networks.com
 
−
 
 
−
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.2.1]]''' | 2019.12.10====
 
−
 
 
−
*New features:
 
−
**Added all LED indication on device power on.
 
−
 
 
−
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.1.0]]''' | 2019.03.28====
 
−
 
 
−
*Improvements:
 
−
**Improvements made to the boot up process
 
−
 
 
−
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.1]]''' | 2017.07.19====
 
−
 
 
−
*New features:
 
−
**Added GigaDevice flash support
 
−
 
 
−
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.0]]''' | 2017.04.26====
 
−
 
 
−
*Improvements:
 
−
**Increased CPU clock speed to 400MHz
 
−
 
 
−
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 1.0.0]]''' | 2017.04.14====
 
−
 
 
−
*New features:
 
−
**Released U-boot
 
−
-->
 

Latest revision as of 10:28, 19 April 2023

RUT2_R_00.07.04.2 | 2023.04.18

  • New
    • nftables support
  • Improvement
    • Network
      • Added PDP profile registry and LTE SMS format functions & management for the Verizon network
      • Improved SIM detection algorithm
      • Improved Multi-APN connection establishment time
    • WebUI
      • Improved Overview page performance
    • System
      • Changed hostname to router name
      • Updated OpenSSL to version 1.1.1t
      • Updated CA certificates to version 20211016
      • Updated libiwinfo to version 2022-08-19
  • Fix
    • Network
      • Fixed IPv4, IPv6 mobile connection restarts
      • Fixed operator scanning when mobile interface is disabled
      • Fixed data limit and tracking when software flow offloading is enabled
      • Added network reload call before bringing the mobile interface up
      • Fixed Port-based VLAN ID calculation issue
      • Fixed PDP context authentication when using special characters
    • Services
      • Fixed event text for configurable inputs/outputs on I/O Juggler
      • Fixed I/O PIN3 value not changing via MODBUS TCP
      • Added I/O status request error handling in various WebUI pages when the I/O service is booting up
      • Fixed wrong timezone returned issue in Operator Station Synchronization & Timezone Synchronization
      • Fixed MODBUS TCP Slave memory leak issue when requesting mobile parameters
      • Fixed OpenVPN enabling/disabling when using Password or TLS/Password authentication modes
      • Fixed OpenVPN keep alive setting migration issue
      • Fixed PPTP server name setting migration issue
      • Fixed missing WebUI issue caused by Email Relay installation
      • Fixed NTP's Operator Station Synchronization memory leak issue
      • Fixed test email validation
    • System
      • Fixed libcares vulnerability CVE-2022-4904
      • Fixed frr vulnerability CVE-2022-37035
      • Fixed an issue with mobile metric setting migration from legacy FWs to RUTOS
      • Removed ability for non root users to edit scripts that get executed as root

RUT2_R_00.07.04.1 | 2023.03.24

  • Fix
    • Network
      • Fixed Data Limit issue

RUT2_R_00.07.04 | 2023.03.07

  • Improvements
    • WebUI
      • Improved data persistence between page refreshes
      • Improved page navigation behavior
      • Improved redirect logic to open configuration edit modals
      • Updated the 'Status -> Mobile' page
      • Updated interface card in the Overview page
      • Separated Sent and Received data bars on the chart in the Mobile Usage page
    • Network
      • Added an info message displayed when a faulty SIM card is inserted
      • Added ResIOT operator's APNs to the APN database
      • Improved mobile connection re-establishment after reboot
      • Improved mobile connection recovery in cases where it was lost unexpectedly
      • Improved 'Deny data roaming' operation when switching between operators
      • Changed default WiFi AP cipher to CCMP (AES)
      • Added the logging of MAC addresses rejected by a WiFi AP
    • Services
      • Added MQTT support to I/O Juggler
      • Added an error message when trying to send an SMS from the 'Send Messages' page with no SIM card inserted
      • Changed the behavior of setting the 'Write to config' flag in the 'mobileoff' SMS rule
      • Added argument support for the 'Execute custom script' SMS rule
      • Added a frequency option 'schedule' Modbus Master
      • Added pagination to Events Reporting overview
      • Added limit to Events Reporting rule list
      • Added email logging for Events reporting
      • 'Sync with browser' button in the NTP page now also synchronizes the time zone
      • Added a limit of 30 for NTP instances
      • Made Networks selections in the 'Traffic Logging' page to display interface choices dynamically
      • Added "make before break" option to IPsec configuration
      • Added MODBUS TCP connection handling layer to MQTT-MODBUS Gateway
      • Improved MODBUS Master connection handling to reduce connection count
      • Updated modbus request error messages
      • Added OpenVPN server ip block support
      • Added MQTT support for MODBUS Master alarms
      • Added the possibility to get the device's Ethernet port data via SNMP
    • System
      • Updated bash to version 5.1.16
      • Added detailed FW update failure error message to Events Log
      • Improved firmware upload/validation error messages
      • Updated Turkish language support
      • Added protocol column to IP block page
      • Added "vpns.log" file to the Troubleshoot package
      • Added Wireguard tunnel information to the Troubleshoot package
      • Updated default admin group access rights
      • Updated DFOTA notification to show "More info" only when the update is forced
  • Fix
    • WebUI
      • Fixed MAC address showing on mobile interfaces
      • Fixed mobile cell ID displaying in hexadecimal
      • Fixed mobile data limit card creation in the Overview page
      • Fixed modem widget disappearing from the Overview page
      • Fixed Services page not displaying data after Thingworx package is installed
    • Network
      • Fixed interface priority change issue
      • Fixed a Custom Firewall Rule editing issue
      • Fixed DMZ configuration saving while it is disabled
      • Fixed Port Scan script execution failure
      • Fixed Firewall zone duplication issue
      • Fixed call function when VoLTE is disabled
      • Fixed VoLTE control when IMS is not enabled
      • Fixed mobile IPv6 IP checking when the device didn't get a correct IP address
      • Fixed APN authentication when using empty credentials
      • Fixed manual APN selection from list
      • Fixed disabled WiFi interface after factory reset
      • Fixed WiFi interface creation with SAE mixed encryption
    • Services
      • Fixed I/O Scheduler overlapping instances issue
      • Fixed Input/Output image pin colors
      • Fixed issue that causes ADC subscribers to receive notifications for when ACL is active
      • Fixed WiFi Hotspot landing page uploaded theme image display
      • Fixed WiFi Hotspot trial user deletion issue
      • Fixed WiFi Hotspot service crash when associated WiFi interface is not up
      • Fixed WiFi Hotspot password request by SMS
      • Fixed WiFi Scanner starting process when the WiFi interface is disabled
      • Added limitations on message size and quantity of email messages in Email to SMS
      • Fixed SMTP HELLO value parsing issue
      • Fixed SMS message window reset button
      • Fixed not being able to save empty 'Message text' field in Auto Reply
      • Fixed multi-part SMS concatenation
      • Fixed multi-part SMS processing
      • Fixed SMS error message on 'Mobile Data Reset' action
      • Fixed Data To Server JSON format %n, %N and %s flag issues
      • Fixed Events Reporting email data clean
      • Fixed Events Reporting missing config selections
      • Fixed GRE Tunnel's 'Tunnel source' field validation when the source is custom
      • Fixed IPsec instance deletion after removing DMVPN package
      • Fixed IPSec migration via Backup file when DMVPN is configured
      • Fixed IPsec naming issue when the includes an equals sign
      • Fixed L2TP client to use correct interface on failover events
      • Fixed L2TP over IPsec connection dropping issue when connecting from a Windows client
      • Fixed MODBUS database size limiting issue
      • Fixed MODBUS MQTT Gateway client ID input
      • Fixed MODBUS TCP Slave RSSI value
      • Fixed MODBUS test button returning errors when several non-connected devices are configured
      • Fixed NTP Etc/GMT+1 and Etc/GMT-1 time zones
      • Fixed OpenVPN password validation when no CA certificate is uploaded or 'custom' template is selected
      • Fixed OpenVPN Static Key configuration saving by making Static key upload required
      • Fixed OpenVPN TLS client creation issue while LAN is down
      • Fixed Package Manager displaying non-existent packages
      • Fixed Package Manager errors showing up after successful installations
      • Fixed Periodic Reboot entry duplication after a power cycle
      • Fixed PPTP 'Client to client' option not being applied after save
      • Fixed receiving excessive device state emails after a reboot is initialized over RMS
      • Fixed WebUI unavailability after unsuccessful package install
    • System
      • Fixed vulnerabilities CVE-2022-3524, CVE-2022-3566, CVE-2022-3567, CVE-2022-39188, CVE-2022-45934, CVE-2022-47929
      • Fixed bash vulnerability CVE-2022-3715
      • Fixed CGI-IO file download vulnerability CVE-2022-38333
      • Fixed libxml2 vulnerability CVE-2022-40304
      • Fixed libcurl vulnerabilities CVE-2022-43551 and CVE-2022-43552
      • Fixed LED animation during firmware upgrade
      • Fixed settings migration issue that caused unreachable Internet after upgrade from a legacy FW version
      • Fixed an issue with OpenVPN TAP configuration migration from legacy FWs
      • Improved file upload logic
      • Fixed GPL firmware compilation with selected Tinc package
      • Fixed OpenVPN Static Key migration via keep settings issue
      • Fixed NTP time zone name setting migration when the name contains whitespaces
      • Fixed language setting issue
      • Fixed integer validation on industrial services
      • Fixed LED indications when PDP type is IPv6
      • Fixed issues with PDP type and SMS limit period migration via keep settings

RUT2_R_00.07.03.4 | 2023.02.09

  • Fix
    • Network
      • Changed generic modem restart method
      • Fixed mobile page VoLTE switching issues
    • Services
      • Sanitized tcpdump storage location
    • System
      • Fixed legacy backup upload
      • Fixed upgrade from legacy FW issue with keep settings

RUT2_R_00.07.03.3 | 2023.01.25

  • Fix
    • Network
      • Fixed disabled WiFi interface after factory reset

RUT2_R_00.07.03.2 | 2023.01.13

  • New
    • System
      • Japanese language
  • Improvements
    • Network
      • Optimized mobile netifd script installation
  • Fix
    • Network
      • Shortened modem hang monitor timeout
      • Fixed VLAN option setting when changing VLAN ID

RUT2_R_00.07.03.1 | 2023.01.03

  • Improvements
    • System
      • Remove front-end certificate validation
    • Network
      • Optimized mobile netifd script installation
  • Fix
    • Network
      • Fixed modem communication validation
      • Fixed connection establishment in IPv6 only mode
    • Services
      • Fixed libxml2 vulnerability CVE-2022-40303
      • Fixed an IPsec Phase one & two setting migration issue
      • Fixed OpenVPN migration from legacy firmwares
      • Fixed not being able to create or edit PPTP instances after upgrading from legacy firmware
    • System
      • Fixed JSON key parsing; keys can now be any printable character sequence
      • Fixed memory leak in 'session' module
    • WebUI
      • Fixed file pretty name parsing

RUT2_R_00.07.03 | 2022.12.16

  • New
    • Network
      • Firewall DMZ page
    • Services
      • Java package
      • SFTP server support
      • OPC UA client
      • Hotspot registered users management page
    • System
      • Portuguese language
      • Spanish language
      • Turkish language
      • Email Relay package
    • WebUI
      • New Web menu design
  • Improvements
    • Network
      • Updated modem handling, attachment, tracking and connection establishment processes
      • Added the possibility to select multiple ports in all firewall port fields
      • Added 'Match' traffic by type option to firewall traffic rules
      • Added DNS servers and routing table fields to the Wireguard page
      • Improved generating network topology
      • Moved Relayd, UDP Relay & Static Leases to the Interfaces menu section
      • Update Firewall Traffic Rules page with DSCP and MARK options
      • Added keepalive, holdtime and connect timers to BGP configuration
      • Added 'Use gateway metric' to network protocols web interface
      • Added more DHCPv6 client events to system log
      • Moved IP Filter rules from Modbus TCP Gateway and Over IP services to Firewall page
      • Added option to select subnet parameters in mobile Passthrough/Bridge modes
      • Added WhereverSIM operator APN and fr.lebara.mobi APN to APN database
      • Added mobile connection state for IPv6
      • Added individual WiFi toggle support
      • Added error message when DFS channel is selected during scanning
    • Services
      • Added CSP headers to Hotspot Landing Page
      • Added hotspot user script validation
      • Improved logging of disconnecting client devices
      • Implemented Hotspot 'forget' method, which removes user from DB by MAC
      • Added execute custom script SMS Utilities rule
      • Added receiver and transceiver mode support to SMPP
      • Added timezone synchronization with GSM operator option to NTP Client
      • Updated Zerotier web interface
      • Added IPsec Flush connection option on tunnel initialization
      • Added MODBUS slave regfile validation
      • Added delay, number of timeouts, always reconnect options to MODBUS Master service
      • Added DMVPN Phase 2 and Phase 3 support
      • Added synchronization counting to NTP client
      • Expanded the data that is sent to the Cumulocity cloud with device log, mobile data usage nd GPS data
      • Added 'Unregister' button to RMS page
      • Added new data monitoring options to SNMP: configuration state of wireless, smart queues & VLANs
      • Updated Zerotier package to version 1.10.1
      • Added automatic package removal upon failed installation in Package Manager
      • Added option to describe custom routing table and MTU auto counting to Wireguard VPN
      • Added IP blocking to MQTT Bridge for failed login attempts to prevent bruteforce attacks
      • Updated sqm-scripts to version 1.5.1
      • Improved MODBUS Master service: added multiple datatypes, added multiple register reading for alarms
      • Added monthly reboot option to periodic reboot function
      • Added support for multiple custom option selection to SSTP configuration
      • Added PKCS12 certificate chain support to OpenVPN
      • Improved MQTT to support multiple port listening, multiple bridge connections, notification settings and added support for custom configuration file
      • Added QoS selection to MQTT Modbus Gateway
      • Improved RAM usage during upload and installation of packages via Package Manager
      • Updated curl to version 7.86.0
      • Added brute-force prevention measures to Post/Get
      • Added automatic private and public key generation to Wireguard VPN
      • Added multiple Remote source IP support to IPsec
      • Added the possibility to configure multiple IPsec phase 1 and phase 2 proposals
      • Added functionality to rotate log file when log is saved to Flash memory
      • Improved performance while fetching packages on repeat visits to the Package Manager page
    • System
      • Added a 'test mail' button to the Administration -> Recipients page
      • Added option to clear blocked IPs in the Access Control page after reboot
      • Updated Web Request-Response core logic
      • Added certificate validation to all services that support certificate upload
      • Updated URL protocol validations
      • Removed profile update requests during Save & apply
      • Optimized profile switching logic
    • WebUI
      • Added an indication to the Interfaces page that displays when data limit is enabled
      • Added bootloader version to the Device section in the System page
      • Added configuration page shortcuts to Overview page widgets
      • Added tooltip in Overview that show free, used and total RAM/Flash values on mouse cursor hover
      • Updated network interfaces protocols web interface
      • Updated 404 page to include navigation menu
  • Fix
    • Network
      • Fixed jumbo frames MTU issue
      • Added the 'Any' choice to source & destination IP address field in NAT rule edit
      • Fixed NHRP web interface issues
      • Fixed WAN interface configuration interfering with LAN
      • Fixed mdcollect memory leak issue
      • Fixed data limit not resetting properly
      • Fixed incorrect mobile data usage calculations for multiple day periods
      • Fixed an Auto APN 'Keep settings' issue
      • Fixed data counting after mobile data limit has been reached
      • Fixed mobile band not setting correctly on first try
      • Fixed incorrect data limit conditions causing unwanted SIM switches
      • Fixed Passthrough DHCP lease time setting
      • Fixed mobile bridge mode issue when no DNS servers are supplied
      • Added new Operator Lists instance name validations
      • Fixed mac80211 vulnerabilities CVE-2022-41674, CVE-2022-42719, CVE-2022-42720, CVE-2022-42721, CVE-2022-42722
      • Fixed wireless interfaces connections not reestablishing after disabling & enabling again
      • Added wget tracking method to WAN Failover
      • Added interface checks to remove inaccurate Failover events from the Event Log
      • Fixed Wired WAN connectivity issue when Failover interfaces are disabled
      • Fixed Failover fallback issue
    • Services
      • Fixed GRE, MQTT broker, IP alias, MAC filter & Failover migration from legacy firmwares
      • Fixed relay state switching
      • Fixed Save & Apply issue with ADC/ACL type condition on I/O Juggler
      • Added I/O restart on configuration profile change
      • Fixed I/O voltage range display for power socket pins
      • Fixed SMNP OID for I/O state
      • Fixed I/O Juggler SMS text message Save & Apply issue
      • Fixed Hotspot connected user list maximum upload/download value limits
      • Fixed incorrect connected Hotspot user information in RMS JSON
      • Removed unnecessary field from the Port Mirroring page
      • Fixed Hotspot issues related to specific connected phones
      • Fixed Wireless AP enabled by MODBUS TCP Master not showing in Wireless clients
      • Fixed WiFi Scanner hostname validation issues
      • Fixed UCI SMS Rule return message to display new changes
      • Fixed DNP3 issues when asking for modem temperature
      • Fixed base64 encoding of SMS messages when forwarding to HTTP
      • Fixed SMS sending issues when using multiple APN
      • Added Gateway modem option to IP Block and WoL in SMS Rule edit
      • Fixed unblocking IP addresses with an SMS message
      • Fixed Mobile Utilities page not load properly on some occasions
      • Fixed dbus vulnerability CVE-2020-35512
      • Fixed dnsmasq vulnerability CVE-2022-0934
      • Fixed ext4 vulnerability CVE-2021-3428
      • Fixed kernel vulnerabilities CVE-2021-3669, CVE-2021-4203, CVE-2022-1353, CVE-2022-3435, CVE-2022-20008, CVE-2022-30594
      • Fixed libxm12 vulnerability CVE-2022-29824
      • Fixed Linux vulnerabilities CVE-2021-4148, CVE-2022-0480, CVE-2022-1055, CVE-2022-0886, CVE-2022-2663, CVE-2022-36879 for v5.4
      • Fixed MQTT DoS vulnerability CVE-2021-41039
      • Fixed privoxy vulnerability CVE-2021-44542
      • Fixed python3 vulnerability CVE-2022-42919
      • Fixed strongswan vulnerabilities CVE-2021-41991, CVE-2021-45079
      • Fixed uboot vulnerabilities CVE-2022-30552, CVE-2022-30790
      • Fixed switching between RMS connection types while the device is unregistered
      • Fixed reload issues in website blocking feature
      • Fixed IPsec PSK secret required field validation
      • Fixed bandwidth limiting after QoS is enabled for the first time
      • Fixed Dropbear issues when logging in over IPv6
      • Fixed Modbus status in Status -> Services page
      • Fixed Azure IoT Hub application issues when sending large volumes of data
      • Fixed Azure IoT Hub MQTT password validation
      • Fixed DMVPN configuration migration issue
      • Fixed DMVPN duplicate select options, added suffix to mobile interfaces to use IPv4
      • Fixed DMVPN IPsec connection issue
      • Fixed DMVPN mobile interface 'Keep settings' migration issue
      • Fixed Dynamic DNS long hostname text display issue
      • Fixed Events Reporting memory leak issue
      • Fixed Events Reporting not triggering after flipping an I/O slider
      • Fixed FOTA cron job not starting after factory reset
      • Fixed IPsec local firewall option parsing
      • Fixed IPsec tunnel creation issue when compatibility mode is used and the tunnel name contains an underscore
      • Fixed L2TP, PPTP, SSTP state display in the Status -> Services page
      • Fixed NTP pool hostname validation
      • Fixed OpenVPN certificate remove with Static key and TLS authentication methods
      • Fixed OpenVPN configuration saving issue when using HMAC key authentication
      • Fixed OpenVPN custom dev name transformation to correct format
      • Fixed OpenVPN device name setting logic when uploading config from file
      • Fixed OpenVPN instance status display
      • Fixed OpenVPN TAP (bridged) configuration detection
      • Fixed Qos configuration saving issue occurring after instance deletion
      • Fixed RMS JSON incorrect WAN state and IP information
      • Fixed RMS step access issue in the Setup Wizard page
      • Fixed SNMP issues after reboot while using a Hotspot
      • Fixed SNMP generating MIB files for devices in accordance with to their hardware
      • Fixed SNMP traps not working after SNMP is installed from server
      • Fixed SSTP client route creation issue
      • Fixed UPNP secure mode not turning off issue
      • Fixed Wireguard route to endpoint issue
      • Fixed manual package installation for queued packages
      • Fixed NAT Rules dependency from IPsec web instance
      • Returned usleep utility
      • Updated Australian and South African NordVPN server IP addresses
    • System
      • Fixed certificate signing issues
      • Fixed Telnet, CLI access blocking after max invalid tries
      • Fixed FW upgrade with 'Keep settings' while low free space is available
      • Fixed backup file duplication issue
      • Fixed network device handling in system
    • WebUI
      • Fixed Hotspot interface display
      • Fixed side widget accessibility during first login
      • Fixed file upload issues
      • Fixed drag and drop issue in the Traffic Rules page
      • Fixed protocol display in the overview of the Interfaces page
      • Fixed blocked IP settings migration during a FW upgrade with the 'Keep settings'
      • Fixed login errors after browser tab restoration
      • Fixed redirect to newly set IP address after Interface configuration
      • Fixed firmware upgrade verify spinner not closing
      • Fixed an issue with file upload via drag and drop

RUT2_R_00.07.02.7 | 2022.09.12

  • Improvements:
    • Improved manual-auto connection mode
  • Fixes
    • Fixed AT command for SMS storage usage
    • Fixed CVE-2022-1012 memory leak vulnerability
    • Fixed CVE-2022-37434 kernel vulnerability
    • Fixed interface option reset after VLAN ID change
    • Removed memory leak on port events
    • Fixed WiFi Scanner out of range crash when iterating collected data

RUT2_R_00.07.02.6 | 2022.08.24

  • Improvements:
    • Added 'home.vodafone.de' APN
    • Improved stability of device information storage
  • Fixes:
    • Added SMSC type omitting when empty SMSC number parsed in SMS PDU mode
    • Fixed Serial-symlink dmesg messages
    • Fixed OpenVPN tls-auth and tls-crypt option names

RUT2_R_00.07.02.5 | 2022.08.12

  • Improvements:
    • Updated curl to version 7.83.1
    • Updated firmware validation error messages
    • Added multiple source IP address support to the Port Forwards page
    • Increased custom APN Username & Password field maximum length to 64 symbols
    • Added auto switch to modem's SMS storage when SIM card storage doesn't exist
    • Improved mobile connection status handling
    • Added CSP headers Hotspot WebUI landing page
  • Fixes:
    • Fixed CVE-2022-32205, CVE-2022-32206, CVE-2022-32207, CVE-2022-32208 curl vulnerabilities
    • Fixed CVE-2022-30065 busybox vulnerability
    • Fixed file upload path traversal
    • Removed Data to Server limit to proccess less than 10 instances
    • Fixed Data to Server 'out of memory' crashes when database is full or has a large amount of data
    • Fixed OpenVPN dev setting logic
    • Fixed OpenVPN updating from legacy issue that caused IPv6 not to work
    • Fixed MAC and leasetime setting for Bridge & Passthrough modes
    • Fixed modal tabs navigation when editing wireless interface with non-english languages

RUT2_R_00.07.02.4 | 2022.07.20

  • Improvements:
    • Added default password change warning message before firmware downgrade
    • Extended time period for device to make connection to operator
    • Reduced the number of modem reboots when changing mobile settings
    • Reduced excessive log output when no SIM card is inserted
    • Added modem restart prevention on modem init
    • Added disable RPLMN option in the SIM section of the SIM card config
  • Fixes:
    • Fixed CVE-2022-2068 vulnerability
    • Disabled autoconnect on stop-network call
    • Fixed Hotspot login via landing page issue

RUT2_R_00.07.02.2 | 2022.06.27

  • Improvements:
    • Added ping to DNS IPv6 support
    • Added modem reset to default state after device FW upgrade
    • Modem init now checks NVRAM sensitive commands before setting
    • GSM output was made consistent
    • Updated FSTools package to version 2022-05-03
    • Added security headers to web requests
  • Fixes:
    • Fixed CVE-2019-12900 libbz2 vulnerability
    • Fixed behavior of some gsmctl commands
    • Fixed CVE-2022-23303 hostapd vulnerability
    • Fixed CVE-2022-29581 Linux kernel vulnerability
    • Fixed CVE-2022-29458 ncurses vulnerability
    • Fixed CVE-2022-1292 c_rehash script command injection vulnerability
    • Fixed band locking issue
    • Fixed race condition for wireless configuration initialization
    • Fixed operator control issue

RUT2_R_00.07.02.1 | 2022.06.06

  • Improvements:
    • Improved GSM related messages in Troubleshoot logs
  • Fixes:
    • Fixed IGMP Proxy menu item not appearing after package installation
    • Fixed default mobile network configuration generation
    • Fixed MODBUS write requests and Mobile Utils option setting

RUT2_R_00.07.02 | 2022.05.23

  • New features
    • Overview side widget
    • IGMP Proxy
    • Privileged Access Management (PAM)
    • AWS Greengrass support
    • HTTPS certificate and key upload feature
    • SSH public keys edit box
    • License page
    • DNP3 data for Data to Server
  • Improvements
    • Updated busybox to version: 1.34.1
    • Updated curl to version 7.79.1
    • Added iptables filter package for string filtering
    • Added CHAP authentication for L2TP VPN
    • Added IPv6 support for L2TPv3 VPN
    • Added EAP-MSCHAPV2 authentication method for IPsec VPN
    • Added IPv6 support to Auto Reboot
    • Added 'Save to flash' and 'Test configuration' button to DNP3 configuration page
    • Updated SNMP version 5.9.1
    • Added OpenSSL authentication options to SNMPv3
    • Added support for OSPF redistribution options and OSPF neighbors
    • Added password field to BGP Peers page
    • Extended BGP "AS" field validation to accept integers up to 4294967295
    • Added "DHE+RSA" to OpenVPN cipher selections
    • Increased OpenVPN max password length from 128 bytes to 512 bytes
    • Made HMAC key direction initial value dependent on the role of the instance (client or server)
    • Made HMAC key and HMAC authentication key upload fields required
    • Added DES to IPsec encryption algorithms selections
    • Added special character support for CHAP secrets
    • Added validation requirements for PPTP user list username field
    • Added option to manually enter Public key in Wireguard configuration
    • Made generating Wireguard keys possible only while in auto mode
    • Added Events Log database to troubleshoot archive
    • Added RFC1918 filter field
    • Added the possibility to unblock multiple blocked devices at once
    • Added 'Port' column to blocked login attempts table
    • Added Speedtest server refresh
    • Updated Speedtest server list
    • Added asterisk option to Site Blocking
    • Added MD5 and SHA256 checksums to package validation page
    • Changed certificate requirements to only require client key file if client certificate is used
    • Added pagination and data retention between table pages
    • Added pagination functionality to tables when there are more than 10 records
    • Improved table sorting by saving user provided sort settings in the browser
    • Improved drag and drop functionality
    • Added the possibility to drag and drop files onto upload components
    • Moved 'Root CA' from the 'Access Control' page to the 'Certificates' page
    • Added 'Strict-Transport-Security' response header for HTTPS
    • Added 'breadcrumbs' to modal windows
    • Improved initial WebUI loading after login
    • Added mobile bytes sent and bytes received SNMP OIDs
    • Added mobile LED turn off feature ('System -> Administration' page)
    • Added 'iot.1nce.net', 'internet', 'VZWINTERNET' and Truphone APNs to APN database
    • Updated mobile usage data point calculation logic
    • Added the possibility to manually enter operator number
    • Improved obtain mobile cell ID process
    • Added modem restart if SIM card is removed during APN database fetching process
    • Added unauthorized call logging
    • Added space character support in SMS commands
    • Disabled SMS modem storage configuration form when SIM is not inserted
    • Changed SMS '%wi' parameter value to return IP address of any currently used WAN interface (not only wired)
    • Added external modem SMS limit Overview card and widget
    • Made in-use APNs visible next to mobile interface configurations (before clicking the 'Edit' button)
    • Added duplicate value check for list configuration options
    • Changed mobile card instance design
    • Fixed 'Mobile Data usage reset' SMS rule
    • Fixed the default state parameter of SMS list POST/GET command
    • Added Hotspot configuration profiles
    • Added local Hotspot user password hashing
    • Added Hotspot password encoding option
    • Improved Hotspot related firewall rule setting
    • Improved WiFi Scanner enable switch to toggle 2 and 5 GHz instances separately
    • Removed CHAP authentication protocol for WiFi Hotspots due to incompatibility with hashed passwords
    • Added ubus support to Hotspot
    • Changed default port name of WiFi devices for 'Topology state' Events Reporting rule
    • Added I/O SNMP trap
    • Added ISO 8601 time format to I/O Juggler's '%ts' parameter
    • Added device name parameter '%pc' to I/O Juggler
    • Added PPPoE VLAN priority support
    • Made VRRP ping section dependent on main instance
    • Added 'WAN to LAN' switch
  • Fixes
    • Fixed CVE-2021-20322, CVE-2021-4197, CVE-2022-1011, CVE-2022-0847 kernel vulnerabilities
    • Fixed CVE-2022-28391 busybox vulnerability
    • Fixed CVE-2018-16789 shellinabox vulnerability
    • Fixed CVE-2021-44543, CVE-2021-44542 privoxy vulnerabilities
    • Fixed CVE-2021-43618 GNU Multiple Precision Arithmetic Library vulnerability
    • Fixed zlib backport security issue
    • Fixed Wireguard firewall zone assignment
    • Fixed queued packages disappearing from list after FW upgrade with keep settings
    • Fixed error message display for multiple input validation rules
    • Fixed incorrect DHCP validation range for start and limit fields
    • Removed 'Bring up on boot' option from network interface configuration pages
    • Fixed coma-separated DHCP options disappearing after save
    • Fixed exclude and listen interfaces
    • Fixed 'Use broadcast flag' option saving
    • Fixed firewall zone assignment when creating new interfaces
    • Fixed OpenVPN 'Netmask' and 'IP address' field validations
    • Fixed OpenVPN TAP configuration saving issue
    • Fixed OpenVPN switching to TUN mode when uploading a configuration from file
    • Fixed dynamic BGP route state display
    • Fixed BGP peer enable in edit page
    • Fixed issue when no L2TP client instance could be bound to IPsec
    • Fixed firewall rule and zone behavior related to config section creation
    • Added default value for L2TPv3 netmask, which is now written to config after save
    • Fixed passthrough option saving to IPsec file
    • Fixed DMVPN issue where instance configuration could not be saved
    • Fixed Wireguard peer could not be saved issue
    • Fixed NTP client time synchronization after factory reset
    • Fixed device time display with selected time zone
    • Fixed MODBUS TCP indexation missing bracket issue
    • Fixed initial MODBUS TCP request count validation
    • Fixed PIN 3/4 direction switching over MODBUS TCP
    • Fixed MODBUS data to MQTT socket closing issue when connection fails
    • Fixed MODBUS alarm configuration deletion
    • Fixed DNP3 master not working after FW upgrade with 'keep settings'
    • Fixed DNP outstation not returning error messages
    • Added missing SNMP objects: mobile IP, data sent/received today
    • Fixed MQTT Publisher 'Remote address' field validation
    • Fixed long interface name support for Azure IoT Hub
    • Increased maximum Azure IoT Hub 'Connection String' length to 4096 characters
    • Fixed missing sent/received data issue
    • Fixed URL input field length validation
    • Fixed admin login issue after upload of backup from a device with older firmware versions
    • Fixed MAC address formatting in Events reporting messages
    • Fixed Events reporting DHCP lease message spam, when no new lease is added
    • Fixed logging crashing after downloading Troubleshoot file
    • Made Wake on LAN visible only on devices with Ethernet ports
    • Fixed Traffic log file transfer to FTP server
    • Fixed Web Filter service reloading after a host list file is uploaded
    • Fixed access denied messages when sending JSON-RPC requests from root user
    • Fixed error message display about duplicated intervals in Profile scheduler
    • Fixed FW upgrade with 'keep settings' migration issue for Access Control's 'Fail count' and 'Device port' fields
    • Corrected OSPF Routing card values, value positions and names
    • Fixed global secret instances not being removed when there are no IPsec instances
    • Fixed uploaded file remove icon not staying in position on hover
    • Fixed Overview card collapse issue that made it unresponsive after too many clicks
    • Removed WAN6 interface from the Overview page
    • Fixed mobile IPv6 display in Events Reporting status messages
    • Fixed Bridge mode when DNS2 is not available
    • Fixed PAP/CHAP username and password fields not saving in interface edit window
    • Fixed sending email without secure connection for providers that support such an option
    • Fixed 'N/A' parameter showing up in SMS Utilities monitoring status message
    • Fixed Call Utilities Events Log message for reboot rule
    • Fixed SMS command validation for no-authorization option
    • Fixed MODBUS SMS alarms 'Enable' option saving
    • Fixed running RMS with no SIM card inserted issue
    • Fixed firmware available on server version checking issue
    • Fixed CVE-2020-15078 openvpn vulnerability
    • Fixed storage calculation for packages
    • SMS Utilities: enhanced service security
    • Fixed firmware deletion after leaving the page
    • Fixed setup wizard redirect after LAN IP change
    • Fixed various validation bugs, typos, option hints & alignments
    • Fixed multiple IPv6 configuration field validations
    • Fixed PDP logging for Verizon operator
    • Added multiwan support for Wireguard default route
    • Fixed wireless signal strength display when no clients are connected
    • Fixed loss of connectivity for clients when router is in STA+AP mode
    • Added validation that prevents automatic connection to first unencrypted WiFi AP when using MULTI AP
    • Fixed Wifi Scanner data not being stored in certain scenarios
    • Fixed WiFi scanner not turning on after FW upgrade with 'keep settings'
    • Fixed Hotspot user group limit not resetting on specified time
    • Removed an RMS error message when no Hotspot users were created
    • Fixed Hotspot landing page image upload issue
    • Fixed relay output value display in I/O Juggler condition page
    • Fixed I/O Juggler's WiFi rule not enabling or disabling WiFi interfaces
    • Fixed I/O Juggler's double delete issue on I/O Juggler action and condition instances
    • Fixed I/O Juggler's incorrect I/O status messages
    • Fixed APN migration if APN was selected from APN list on legacy firmware
    • Fixed RIP configuration migration from legacy firmware versions
    • Fixed Wireguard interface status setting migration from legacy firmware versions
    • Fixed default config options for SSH and Web access SMS Utilities rules

RUT2_R_00.07.01.4 | 2022.02.25

  • Improvements
    • Increased Port Forwards rule max name length
    • Added a new '%it' parameter for UTC time in ISO 8601 format to I/O Juggler
  • Fixes
    • Added missing bracket to the end of MODBUS messages
    • Fixed preserving the contents of /etc/luci-uploads/ after FW upgrade with the 'Keep all settings' option
    • Fixed IPv4-Gateway column showing empty values in the Status -> Routes page
    • Fixed firewall extra option validation
    • Fixed Hotspot enable button validation
    • Removed invalid network interface selections from the "Network" dropdown in the Wireless interface configuration page
    • Changed the logic of uploading files to the modem
    • Fixed second mobile interface creation issue
    • Fixed usage of custom headers in I/O Juggler HTTP action
    • Fixed 'verify' option parsing for I/O Juggler
    • Fixed OpenVPN server configuration with password authentication
    • Fixed NTP interval length validation
    • Fixed network interface enable after Drag & Drop
    • Updated NTP client interval to 24h
    • Fixed connection to whitelist carriers
    • Fixed Passthrough mode when DHCP is disabled
    • Fixed 'Deny data roaming' feature
    • Fixed mobile blocking dependency on region
    • Disabled Ping To DNS functionality when Bridge/Passthrough mode is enabled

RUT2_R_00.07.01.2 | 2022.01.04

  • New features
    • DFOTA modem upgrade system for Quectel modems
  • Improvements
    • Removed L2TP section title prefixes
  • Fixes
    • Fixed IPSec crashing issue using mobile
    • Fixed FW flashing when chip is in unknown state
    • Fixed CPU usage percentage display in the Overview page
    • Fixed FOTA timeout issue when server does not respond
    • Fixed installation of backup packages
    • Fixed mobile data limit display after profile change
    • Fixed Bridge mode without multi-APN
    • Fixed multi mobile interface checking
    • Fixed error handling when the modem is not responding
    • Prolonged autoconnect setting timeout

RUT2_R_00.07.01 | 2021.11.18

Note: Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.

  • New features
    • RUTOS WebUI
Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut2xx_firmware_change_log&oldid=106848"