9,305
edits
Changes
Template:Networking rut2xx firmware change log (view source)
Revision as of 14:44, 11 October 2021
, 14:44, 11 October 2021no edit summary
===='''[[Media:RUT2XX R 00.01.14.4 WEBUI.bin|RUT2XX_R_00.01.14.4]]''' | 2021.10.11====
* New features:
** Added MeigLink SLM750-VAU support
** Added ping to DNS feature for mobile
* Fixes:
** Patched CVE-2021-33909 vulnerability
** Patched CVE-2019-14834 vulnerability
** Patched CVE-2021-37600 vulnerability
** Fixed VoLTE configuration for EC25-V modules
** Fixed seting band issues
** Fixed RMS rscp, ecio, rsrp, sinr and rsrq values
===='''[[Media:RUT2XX R 00.01.14.3 WEBUI.bin|RUT2XX_R_00.01.14.3]]''' | 2021.08.17====
* New features:
** Added MeigLink SLM750-VSA and SLM750-VJ support
** Added MeigLink SLM750-VJ manual frequency band selection
** Added MQTT Modbus Gateway keep alive option
* Improvements:
** Added conntrack flush after IPsec connection
* Fixes:
** Fixed hardware information config corruption when applying backup
** Fixed backup archive validation
** Fixed redirecting to correct IP address after firmware upgrade with keep settings
** Fixed Modbus Master Alarms enabling
===='''[[Media:RUT2XX R 00.01.14.1 WEBUI.bin|RUT2XX_R_00.01.14.1]]''' | 2021.07.02====
* New features:
** MeigLink SLM750 Australian module support
* Improvements:
** Added CallFailed error handling
** Updated APN database with OTA BELL ME operator APN
** Added Client ID option to Data to Server
** Added band selection support for Meiglink SLM750
** Added band parsing to mobile library
** OpenSSL updated to version 1.1.1k
* Fixes:
** Fixed signal strength LED handling for Meiglink modems
** Fixed backup generating without packages
** Fixed service mode handling for Meiglink SLM750 modems
** Fixed band handling when switching service modes
** Fixed SMS storage swap to modem when connection type changed from QMI to PPP
** Fixed IPsec Passthrough function handling
** Fixed Package Manager package install crash on reboot
** Fixed modem FW version show for Meiglink SLM750
** Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
** Fixed DDNS hostname, username and password fields not showing when custom service is chosen
** Fixed IPSec Pre-shared key option validation
** Added security Wireless fixes for the FragAttacks vulnerabilities
===='''[[Media:RUT2XX R 00.01.14 WEBUI.bin|RUT2XX_R_00.01.14]]''' | 2021.03.23====
* New features:
** PPPoE wired WAN
** WiFi Multiple AP configuration page
* Improvements:
** Added SHA1 HMAC hash support to dropbear (SSH server/client)
** Updated libpcap to version 19.1
** Updated sqlite3 to version 3.33
** Updated curl to version 7.74
** Updated ncurses to version 6.2
** Updated pcre to version 8.44
** Updated iptables to version 1.6.2
** Added hard request, alarm and slave limits to MODBUS TCP Master
** Added USB ZLP flag to avoid mobile network loss
** Added new gsmctl command that returns operator names
** Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically
* Fixes:
** Fixed CVE-2019-9755
** Fixed CVE-2018-16789
** Fixed CVE-2020-12762
** Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
** Fixed revision buffer size for Operator Control
** Fixed operator selection logic
** Fixed default PPTP route option handling
** Fixed display of DDNS Hostname, Username and Password options when custom service is selected
** Fixed incorrect VLAN ID range
** Fixed IPsec start after reboot issue
** Fixed IPsec cache issues
** Fixed firewall rule execution when QoS is not enabled
** Fixed ZeroTier crashing issues
** Fixed Events Log Reporting sending email with attached file
** Fixed unexpected Package Manager crash while installing unsupported packages
** Fixed static mobile routes after modem restart
** Fixed routing issue with mobile PPP connection type
** Fixed double entries after firmware upgrade with keep settings on Output Scheduler
** Fixed Hotspot freeze on launch with certain config bug
** Fixed wireless device frequency and channel display in wireless widget
** Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration
===='''[[Media:RUT2XX R 00.01.13.3 WEBUI.bin|RUT2XX_R_00.01.13.3]]''' | 2021.01.26====
* Fixes:
** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
** Fixed SSH reachable over SIM IP in early boot
===='''[[Media:RUT2XX R 00.01.13.2 WEBUI.bin|RUT2XX_R_00.01.13.2]]''' | 2021.01.12====
* Fixes:
** Added openvpn patch to fix CVE-2020-11810
** Updated openssl to version 1.1.1i
** Added dnsmasq patch for CVE-2019-14834
** Added strongswan patch to fix CVE-2018-10811
** Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
** Updated uci to version 2019-09-01
** Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
** Fixed factory reset on button that wouldn't perform a complete settings wipe
===='''[[Media:RUT2XX R 00.01.13.1 WEBUI.bin|RUT2XX_R_00.01.13.1]]''' | 2020.11.19====
* Fixes:
** Randomized the global rate limiter to mitigate "SAD DNS" attack
===='''[[Media:RUT2XX R 00.01.13 WEBUI.bin|RUT2XX_R_00.01.13]]''' | 2020.10.23====
* New features:
** IPsec Xauth
** IPsec Passthrough
* Improvements:
** Added Input/Output default chain policy selections for firewall zones
** Removed IPv6 related options from Setup Wizard
** Improved WebUI page loading speed
** Added a possibility to set MQTT credentials for Modbus Data Sender
** Added options to keep connection open for Modbus TCP Slave
** Added TLS certificate options to HTTP(S) data sending for Modbus data
** Added the option to send SMS messages to multiple numbers on Modbus Alarms
** Added IPsec aggressive host enable option
** Expanded IPSec identifier validation
** Added WiFi SSID field validation
** Changed IP leasing sequence in mobile Passthrough mode
** Added SHA512 support
** Added MD5 & SHA256 checksum calculation for Configuration Backup files
** Added uploaded package signature verification to Package Manager
** Added new program that sends and reads GRE Tunnel 'keep alive' packets
** Changed default WAN Failover values
** Simplified key combination for opening a new CLI tab
* Fixes:
** Fixed Modbus MQTT Gateway not responding when connection with broker restarts
** Fixed Modbus MQTT Gateway not responding when topics gave special characters
** Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
** Fixed configuration field validations in the Modbus MQTT gateway page
** Fixed MQTT topic validation in Modbus pages
** Fixed configuration field validations in the ThingWorx page
** Fixed Periodic Output Control table layout
** Fixed security related issues to file uploading and HTTP headers
** Fixed adding new L2TP and PPTP instances on non-English WebUI
** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
** Fixed WiFi SSID string handling in fix_sta_ap.sh
** Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
** Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
** Fixed table design in the System → Administration → Access Control → Safety page
** Fixed not setting iptables rules for mobile interface
** Fixed saving APN after firmware upgrade
** Fixed default mobile MTU setting
** Fixed access to LAN page when mobile Bridge mode is enabled
** SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
** Removed IPv6 Subprefix Hint field from the Network → LAN page
** Fixed DNS push from OpenVPN server
** Fixed L2TP over IPsec with Android 10
** Removed crt_rms deprecated service
** Fixed RMS collecting data usage
** Fixed mobile status error for Load Balancing
** Fixed WAN MAC address value in SMS Utilities command response
** Fixed answer delay for Call Utilities commands
** Fixed key combination not working
** Removed Wireguard from the Network → Status page when this package is not installed
** Changed SNMP RX, TX object types to uint64
===='''[[Media:RUT2XX R 00.01.12.3 WEBUI.bin|RUT2XX_R_00.01.12.3]]''' | 2020.06.15====
* Improvements:
** Improved RMS connection establishment
===='''[[Media:RUT2XX R 00.01.12.2 WEBUI.bin|RUT2XX_R_00.01.12.2]]''' | 2020.05.08====
*Fixes:
**Fixed Verizon operator APN configuration
===='''[[Media:RUT2XX R 00.01.12.1 WEBUI.bin|RUT2XX_R_00.01.12.1]]''' | 2020.04.09====
*Fixes:
**Fixed AT&T operator APN
===='''[[Media:RUT2XX R 00.01.12 WEBUI.bin|RUT2XX_R_00.01.12]]''' | 2020.03.24====
===='''[[Media:RUT2XX R 00.01.12 WEBUI.bin|RUT2XX_R_00.01.12]]''' | 2020.03.24====
*New features:
*New features:
**WebUI: added sms remote configuration option
**Added sms remote configuration option
**WebUI: added back to overview button in Hotspot
**Added "Enable HTTPS" option in "Access Control" page
**Added network frequency band select support for EG25-G modem
**Added additional service mode options to setup wizard
**WebUI: added network frequency band select support for EG25-G modem
**Added Japanese language support
**WebUI: added additional service mode options to setup wizard
**Added TLS support to MQTT publisher
**WebUI: added Japanese language support
**Added mqtt subscriber support
**MQTT publisher: added TLS support
**Azure IoThub : added mqtt subscriber support
**MQTT-Modbus gateway: add MQTT-Modbus gateway support
**MQTT-Modbus gateway: add MQTT-Modbus gateway support
**Package Manager : added ability to install packages stored in backup file
**Added ability to install packages stored in backup file
**WebUI: updated teltonika links
**Full Unicode SMS support
**Added time sync from operator station
**Added ntpclient failover to operator station sync
**NTP: added time sync from operator station
**NTP: added ntpclient failover to operator station sync
*Improvements:
*Improvements:
**WebUI: removed wep encryption from wifi settings
**Removed wep encryption from WiFi settings
**WebUI: added missing length validations in various fields
**Added profile scheduler and default configuration profile
*Fixes:
*Fixes:
**WebUI: fixed TR-069 wan type value
**Fixed TR-069 wan type value
**WebUI: fixed spinner animation in wireless configuration
**removed GRE tunnel option in Events reporting
**Removed config update from server option
**Fixed to display the same units of download and upload speeds in the Hotspot settings.
**WebUI: fixed troubleshoot loading animation
**Fixed not showing Hotspot users upload/download statistics
**Added ability to write hyphens to static lease hostname.
**WebUI: fixed hotspot field validation and unit display
**Fixed RAM usage display
**WebUI: fixed sms service configuration
**Fixed password change URL after firstboot
**Removed change password error message after firstboot
**WebUI: fixed static lease hostname, now hyphens are allowed
**Fixed Web access Control via SMS Utilities
**WebUI: fixed RAM usage display
**Fxed signal strength logging and reporting
**WebUI: fixed password change URL after firstboot
**WebUI: fixed profile modification messages
**SMS-utilities: fixed invalid behavior of SMS Utilities Web access Control function
**Events Reporting : fixed signal strength logging and reporting
===='''[[Media:RUT2XX R 00.01.11.3 WEBUI.bin|RUT2XX_R_00.01.11.3]]''' | 2019.12.04====
===='''[[Media:RUT2XX R 00.01.11.3 WEBUI.bin|RUT2XX_R_00.01.11.3]]''' | 2019.12.04====
**Improved Mobile Data Limit functionality
**Improved Mobile Data Limit functionality
**Improved Load Balancing functionality
**Improved Load Balancing functionality
<!--
===Bootloader Change Log===
===Bootloader Change Log===
----
----
===='''[[Media:U-boot mod tlt rut200 3.1.0 webui.bin|RUT2XX Bootloader version 3.1.0]]''' | 2019.03.28====
'''NOTE''': there are two Bootloader files in the archive. Which file should be used depends on circumstances. More details on this and how to upgrade the Bootloader to a newer version can be found '''[[RUT2xx Bootloader Upgrade|here]].'''
===='''[[Media:U-boot_mod_tlt_rut200_3.2.2.zip|RUT2XX Bootloader version 3.2.2]]''' | 2020.03.06====
*Improvements:
**Updated links to teltonika-networks.com
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.2.1]]''' | 2019.12.10====
*New features:
**Added all LED indication on device power on.
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.1.0]]''' | 2019.03.28====
*Improvements:
*Improvements:
*New features:
*New features:
**Released U-boot
**Released U-boot
-->
