Difference between revisions of "Template:Networking rut2xx firmware change log"

From Teltonika Networks Wiki
(Replaced content with "===<b>RUT2_R_00.07.01.2</b> | 2022.01.04=== * <b>New features</b> ** DFOTA modem upgrade system for Quectel modems * <b>Improvement...")
Tag: Replaced
Line 21: Line 21:
 
===='''RUT2_R_00.07.01''' | 2021.11.18====
 
===='''RUT2_R_00.07.01''' | 2021.11.18====
 
<b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
 
<b>Note:</b> Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.
 
===='''[[Media:RUT2XX R 00.01.14.5 WEBUI.bin|RUT2XX_R_00.01.14.5]]''' | 2021.12.09====
 
 
* New features:
 
** DFOTA modem upgrade system for Quectel modems
 
 
* Fixes:
 
** Fixed mobile MTU setting
 
** Fixed incorrect QMI calls to modem
 
** Increased buffer size for AT+CGDCONT output
 
** Fixed persistence of DMZ firewall rules when loading Firewall General page
 
 
===='''[[Media:RUT2XX R 00.01.14.4 WEBUI.bin|RUT2XX_R_00.01.14.4]]''' | 2021.10.11====
 
 
* New features:
 
** Added MeigLink SLM750-VAU support
 
** Added ping to DNS feature for mobile
 
 
* Fixes:
 
** Patched CVE-2021-33909 vulnerability
 
** Patched CVE-2019-14834 vulnerability
 
** Patched CVE-2021-37600 vulnerability
 
** Fixed VoLTE configuration for EC25-V modules
 
** Fixed seting band issues
 
** Fixed RMS rscp, ecio, rsrp, sinr and rsrq values
 
 
===='''[[Media:RUT2XX R 00.01.14.3 WEBUI.bin|RUT2XX_R_00.01.14.3]]''' | 2021.08.17====
 
 
* New features:
 
** Added MeigLink SLM750-VSA and SLM750-VJ support
 
** Added MeigLink SLM750-VJ manual frequency band selection
 
** Added MQTT Modbus Gateway keep alive option
 
 
* Improvements:
 
** Added conntrack flush after IPsec connection
 
 
* Fixes:
 
** Fixed hardware information config corruption when applying backup
 
** Fixed backup archive validation
 
** Fixed redirecting to correct IP address after firmware upgrade with keep settings
 
** Fixed Modbus Master Alarms enabling
 
 
===='''[[Media:RUT2XX R 00.01.14.1 WEBUI.bin|RUT2XX_R_00.01.14.1]]''' | 2021.07.02====
 
 
* New features:
 
** MeigLink SLM750 Australian module support
 
 
* Improvements:
 
** Added CallFailed error handling
 
** Updated APN database with OTA BELL ME operator APN
 
** Added Client ID option to Data to Server
 
** Added band selection support for Meiglink SLM750
 
** Added band parsing to mobile library
 
** OpenSSL updated to version 1.1.1k
 
 
* Fixes:
 
** Fixed signal strength LED handling for Meiglink modems
 
** Fixed backup generating without packages
 
** Fixed service mode handling for Meiglink SLM750 modems
 
** Fixed band handling when switching service modes
 
** Fixed SMS storage swap to modem when connection type changed from QMI to PPP
 
** Fixed IPsec Passthrough function handling
 
** Fixed Package Manager package install crash on reboot
 
** Fixed modem FW version show for Meiglink SLM750
 
** Restored no-ip.com, nsupdate and cloudfire.com-v4 DDNS configurations
 
** Fixed DDNS hostname, username and password fields not showing when custom service is chosen
 
** Fixed IPSec Pre-shared key option validation
 
** Added security Wireless fixes for the FragAttacks vulnerabilities
 
 
===='''[[Media:RUT2XX R 00.01.14 WEBUI.bin|RUT2XX_R_00.01.14]]''' | 2021.03.23====
 
 
* New features:
 
** PPPoE wired WAN
 
** WiFi Multiple AP configuration page
 
 
* Improvements:
 
** Added SHA1 HMAC hash support to dropbear (SSH server/client)
 
** Updated libpcap to version 19.1
 
** Updated sqlite3 to version 3.33
 
** Updated curl to version 7.74
 
** Updated ncurses to version 6.2
 
** Updated pcre to version 8.44
 
** Updated iptables to version 1.6.2
 
** Added hard request, alarm and slave limits to MODBUS TCP Master
 
** Added USB ZLP flag to avoid mobile network loss
 
** Added new gsmctl command that returns operator names
 
** Added check for newline symbol at the end of an uploaded OpenVPN config file; if newline is not found, it is added automatically
 
 
* Fixes:
 
** Fixed CVE-2019-9755
 
** Fixed CVE-2018-16789
 
** Fixed CVE-2020-12762
 
** Fixed CVE-2021-22161 (updated odhcp6c and netifd to fix IPv6 routing loop on point-to-point links)
 
** Fixed revision buffer size for Operator Control
 
** Fixed operator selection logic
 
** Fixed default PPTP route option handling
 
** Fixed display of DDNS Hostname, Username and Password options when custom service is selected
 
** Fixed incorrect VLAN ID range
 
** Fixed IPsec start after reboot issue
 
** Fixed IPsec cache issues
 
** Fixed firewall rule execution when QoS is not enabled
 
** Fixed ZeroTier crashing issues
 
** Fixed Events Log Reporting sending email with attached file
 
** Fixed unexpected Package Manager crash while installing unsupported packages
 
** Fixed static mobile routes after modem restart
 
** Fixed routing issue with mobile PPP connection type
 
** Fixed double entries after firmware upgrade with keep settings on Output Scheduler
 
** Fixed Hotspot freeze on launch with certain config bug
 
** Fixed wireless device frequency and channel display in wireless widget
 
** Fixed typo from 'Start IP address' to 'End IP address' under DHCP server configuration
 
 
===='''[[Media:RUT2XX R 00.01.13.3 WEBUI.bin|RUT2XX_R_00.01.13.3]]''' | 2021.01.26====
 
 
* Fixes:
 
** Added dnsmasq patch CVE-2020-25681, CVE-2020-25682, CVE-2020-25683, CVE-2020-25684, CVE-2020-25685, CVE-2020-25686, CVE-2020-25687
 
** Fixed SSH reachable over SIM IP in early boot
 
 
===='''[[Media:RUT2XX R 00.01.13.2 WEBUI.bin|RUT2XX_R_00.01.13.2]]''' | 2021.01.12====
 
 
* Fixes:
 
** Added openvpn patch to fix CVE-2020-11810
 
** Updated openssl to version 1.1.1i
 
** Added dnsmasq patch for CVE-2019-14834
 
** Added strongswan patch to fix CVE-2018-10811
 
** Added hostapd patch to fix CVE-2019-16275, CVE-2019-11555, CVE-2019-13377 vulnerabilities
 
** Updated uci to version 2019-09-01
 
** Fixed setting APN and toggling Auto-APN on/off via SMS Utilities
 
** Fixed factory reset on button that wouldn't perform a complete settings wipe
 
 
===='''[[Media:RUT2XX R 00.01.13.1 WEBUI.bin|RUT2XX_R_00.01.13.1]]''' | 2020.11.19====
 
 
* Fixes:
 
** Randomized the global rate limiter to mitigate "SAD DNS" attack
 
 
===='''[[Media:RUT2XX R 00.01.13 WEBUI.bin|RUT2XX_R_00.01.13]]''' | 2020.10.23====
 
 
* New features:
 
** IPsec Xauth
 
** IPsec Passthrough
 
 
* Improvements:
 
** Added Input/Output default chain policy selections for firewall zones
 
** Removed IPv6 related options from Setup Wizard
 
** Improved WebUI page loading speed
 
** Added a possibility to set MQTT credentials for Modbus Data Sender
 
** Added options to keep connection open for Modbus TCP Slave
 
** Added TLS certificate options to HTTP(S) data sending for Modbus data
 
** Added the option to send SMS messages to multiple numbers on Modbus Alarms
 
** Added IPsec aggressive host enable option
 
** Expanded IPSec identifier validation
 
** Added WiFi SSID field validation
 
** Changed IP leasing sequence in mobile Passthrough mode
 
** Added SHA512 support
 
** Added MD5 & SHA256 checksum calculation for Configuration Backup files
 
** Added uploaded package signature verification to Package Manager
 
** Added new program that sends and reads GRE Tunnel 'keep alive' packets
 
** Changed default WAN Failover values
 
** Simplified key combination for opening a new CLI tab
 
 
* Fixes:
 
** Fixed Modbus MQTT Gateway not responding when connection with broker restarts
 
** Fixed Modbus MQTT Gateway not responding when topics gave special characters
 
** Fixed Modbus MQTT Gateway enable option hint; fixed option dependencies in data sender configuration
 
** Fixed configuration field validations in the Modbus MQTT gateway page
 
** Fixed MQTT topic validation in Modbus pages
 
** Fixed configuration field validations in the ThingWorx page
 
** Fixed Periodic Output Control table layout
 
** Fixed security related issues to file uploading and HTTP headers
 
** Fixed adding new L2TP and PPTP instances on non-English WebUI
 
** Disabled WiFi STA when authentication fails in STA+AP mode due to bad key
 
** Fixed WiFi SSID string handling in fix_sta_ap.sh
 
** Disabled channel checking if WiFi device is turned off while in the Network → Wireless page
 
** Fixed duplicate "Associated Stations" table entries in the Status → Network → Wireless page
 
** Fixed table design in the System → Administration → Access Control → Safety page
 
** Fixed not setting iptables rules for mobile interface
 
** Fixed saving APN after firmware upgrade
 
** Fixed default mobile MTU setting
 
** Fixed access to LAN page when mobile Bridge mode is enabled
 
** SMS-Utilities: fixed exiting when at least one Events Reporting rule was not enabled
 
** Removed IPv6 Subprefix Hint field from the Network → LAN page
 
** Fixed DNS push from OpenVPN server
 
** Fixed L2TP over IPsec with Android 10
 
** Removed crt_rms deprecated service
 
** Fixed RMS collecting data usage
 
** Fixed mobile status error for Load Balancing
 
** Fixed WAN MAC address value in SMS Utilities command response
 
** Fixed answer delay for Call Utilities commands
 
** Fixed key combination not working
 
** Removed Wireguard from the Network → Status page when this package is not installed
 
** Changed SNMP RX, TX object types to uint64
 
 
===='''[[Media:RUT2XX R 00.01.12.3 WEBUI.bin|RUT2XX_R_00.01.12.3]]''' | 2020.06.15====
 
 
* Improvements:
 
** Improved RMS connection establishment
 
 
===='''[[Media:RUT2XX R 00.01.12.2 WEBUI.bin|RUT2XX_R_00.01.12.2]]''' | 2020.05.08====
 
 
*Fixes:
 
**Fixed Verizon operator APN configuration
 
 
===='''[[Media:RUT2XX R 00.01.12.1 WEBUI.bin|RUT2XX_R_00.01.12.1]]''' | 2020.04.09====
 
 
*Fixes:
 
**Fixed AT&T operator APN
 
 
===='''[[Media:RUT2XX R 00.01.12 WEBUI.bin|RUT2XX_R_00.01.12]]''' | 2020.03.24====
 
 
*New features:
 
**Added sms remote configuration option
 
**Added "Enable HTTPS" option in "Access Control" page
 
**Added network frequency band select support for EG25-G modem
 
**Added additional service mode options to setup wizard
 
**Added Japanese language support
 
**Added TLS support to MQTT publisher
 
**Added mqtt subscriber support
 
**MQTT-Modbus gateway: add MQTT-Modbus gateway support
 
**Added ability to install packages stored in backup file
 
**Full Unicode SMS support
 
**Added time sync from operator station
 
**Added ntpclient failover to operator station sync
 
*Improvements:
 
**Removed wep encryption from WiFi settings
 
**Added profile scheduler and default configuration profile
 
*Fixes:
 
**Fixed TR-069 wan type value
 
**removed GRE tunnel option in Events reporting
 
**Removed config update from server option
 
**Fixed to display the same units of download and upload speeds in the Hotspot settings.
 
**Fixed not showing Hotspot users upload/download statistics
 
**Added ability to write hyphens to static lease hostname.
 
**Fixed RAM usage display
 
**Fixed password change URL after firstboot
 
**Removed change password error message after firstboot
 
**Fixed Web access Control via SMS Utilities
 
**Fxed signal strength logging and reporting
 
 
===='''[[Media:RUT2XX R 00.01.11.3 WEBUI.bin|RUT2XX_R_00.01.11.3]]''' | 2019.12.04====
 
 
*Fixes:
 
**Fixed RMS not displaying data when using WiFi
 
**Fixed RMS not displaying WAN IP with WAN failover
 
 
===='''[[Media:RUT2XX R 00.01.11.2 WEBUI.bin|RUT2XX_R_00.01.11.2]]''' | 2019.11.12====
 
 
*Fixes:
 
**TR-069 WAN type value fix
 
**RMS batch number instead of product code bug fix
 
**Added missing HMAC options and PKCS12 support to OpenVPN
 
 
===='''[[Media:RUT2XX R 00.01.11.1 WEBUI.bin|RUT2XX_R_00.01.11.1]]''' | 2019.10.21====
 
 
*New features:
 
**Auto APN
 
**SMS Utilities Auto APN toggling
 
**Operators control & support for JioAPN
 
**Package Manager
 
**RMS wireless monitoring
 
**Port based VLAN configuration
 
**I/O power socket pinout image
 
**VRRP advertisement interval option
 
 
*Improvements:
 
**UPnP updated to version 2.1
 
**SIM switching optimizations
 
**Faster SSH private key generation on first boot
 
**Added network, serving and neighbor cell information to Troubleshoot files
 
 
*Fixes:
 
**Wget Reboot minimal interval for action 'reboot' added
 
**Ping Reboot packet size 0 fix
 
**Modbus WebUI fixes
 
**Modbus WiFi/Mobile on/off fix
 
**SMS Utilities table validation fix
 
**SMS Utilities UCI API fixes
 
**SMS Utilities SMS response status fix
 
**SMS-Utilities WiFi/Mobile on/off fix
 
**Clarified WebUI options for SMS Forwarding
 
**Hotspot Statistics tab shows incorrect information fix
 
**Hotspot session name validation fix
 
**Hotspot landing page file upload limits increased
 
**Fixed MAC address clone configuration
 
**Fixed sessions table dependency on authentication mode
 
**Events log network type logging on modem service restart fix
 
**Events Reporting typos that prevented rules being matched fixes
 
**WAN Failover option disappearing after language change fix
 
**Removed unnecessary fix_sta_ap.sh from syslog messages
 
**Removed OpenVPN converting names to hex
 
**Added file upload limits
 
**DDNS name validation fix
 
**Hostname and router name after backup upload fix
 
**Mobile Data Limit firewall rule init fix
 
**Added missing password validation
 
**Fixed default VRRP config to follow RFC 2338
 
**Changed packages names in Package Manager
 
**Input/Output label & functionality fixes
 
**FOTA memory calculation fix
 
**Removed "Site Survey" page
 
 
===='''[[Media:RUT2XX R 00.01.10 WEBUI.bin|RUT2XX_R_00.01.10]]''' | 2019.07.12====
 
 
*New features:
 
**New flash validation added
 
 
*Improvements
 
**Added reply after mobileon and mobileoff SMS Utilities commands
 
 
*Fixes:
 
**Firmware upgrade with keep settings fix
 
**PPTP fix when upgrading firmware with keep settings
 
**Do not autocomplete non-system passwords fix
 
**Added validation for 'Service mode' change
 
**VRRP template fix
 
**Added validation for user group number format
 
**SMS Gateway: removed new line add after configuration save
 
**Added validation to prevent shell command execution via 'name' field in Wake on LAN
 
**NTP time zone options fix
 
**MQTT bridge with SSL/TLS connection fix
 
**'Use DNS servers advertised by peer' does not save fix
 
**'FW update available' fix
 
**WAN state and IP print fixes
 
 
===='''[[Media:RUT2XX R 00.01.07.1 WEBUI.bin|RUT2XX_R_00.01.07.1]]''' | 2019.06.10====
 
 
*Fixes:
 
**Increased RMS HTTP Proxy resource limit
 
 
===='''[[Media:RUT2XX R 00.01.07 WEBUI.bin|RUT2XX_R_00.01.07]]''' | 2019.05.31====
 
 
*New features:
 
**SNMP: Individual port status added
 
**openssl: update to version 1.0.2r
 
**dropbear: update to version 2019.78
 
**busybox: update to version 1.30.1
 
**uci: update to version 2018-08-11
 
**ubus: update to version 2018-10-06
 
**ubox: update to version 2019-04-07
 
**libubox: update to version 2019-02-27
 
**MQTT: added MQTT support
 
**WebUI: add additional band support for EC25
 
**UPnP: UPnP added
 
**WebUI: add events reporting and reporting configuration support
 
**Flash: Add XT25F128B flash support
 
**Strongswan: Custom option added
 
**WebUI: upload backup from lower firmware version support
 
 
*Fixes:
 
**Wireless: Station availability when two or more Access Points are created fix
 
**Mobile Graphs: Color and line adjustments
 
**WebUI: Overview->Network->Topology: WAN Failover redirection fix
 
**Strongswan: Shared-keys fix
 
**WebUI: fix input validation issues
 
**Mobile traffic: graph fixes
 
**WebUI: fix LEDs Indication setting
 
**QMI2: set 1st context to IPv4
 
**Hotspot: Restrict internet access fix
 
**Hotspot: 'Invalid' prompt after deleting session fix
 
**IPSec: No shared key validation added
 
**Email-to-SMS: longer SMS fix
 
**IPSec: Allow WebUI access with HTTPS fix
 
**RMS: fixed disable on sysupgrade with keep settings
 
**WebUI: LEDs Indication hint text fix
 
**IPSec: Fixed NAT rules application for IPsec traffic from WEB interface
 
**SMS-Utils: '00XXX' and '+XXX' synonymous numbers fix
 
**Wireless: Regulatory domain and channel change fix
 
**SMS-Management: Error message after successful SMS send fix
 
**Services: SNMP Trap redirection fix
 
**Periodic Control: Rule addition in Chromium fix
 
**Setup Wizard: Dialing number disappearing fix
 
**WAN: After interface edit, redirect back to main WAN window fix
 
**SNMP: Teltonika MIB file fix
 
**rms_mqtt: HTTPs proxy fix
 
**rms_json: Fixed WAN State and WAN IP
 
**Wireless: STA connection loss fix
 
**QoS: Speed limitation fix
 
**Stunnel: Removed unnecessay WebUI options, added validation.
 
**Port Scan Prevention: Disable fix
 
**Port Scan Prevention: Warning message for remote access added
 
**ledman: fixed led issue when there is no connection
 
**ledman: fixed led issue when rebooting router with reset button
 
**Wireless: Channel frequency dispaly fix
 
**Administration: RMS 'infobox' fix
 
**Setup Wizard: RMS 'infobox' fix
 
**Setup Wizard: Validation and redirection fixes
 
**VRRP: updated to 1.15 version
 
**LAN: Static leases fix
 
**Backup: Redirection to 127.0.0.1 after backup load fix
 
**Network: 'Use WAN as LAN' availability fix
 
**WebUI: WAN as LAN when using main WAN WIFI fix
 
**Network: Delete static protocol options after change to DHCP fix
 
**L2TP and PPTP: updated services
 
 
===='''[[Media:RUT2XX R 00.01.06.1 WEBUI.bin|RUT2XX_R_00.01.06.1]]''' | 2019.03.18====
 
 
*New features:
 
**Added 'More' SMS Utilities rule
 
 
 
*Fixes:
 
**RMS reconnect issue fix
 
**Hotspot authentication mode change fix
 
**Overview widget fixes
 
**Connection uptime widget fix
 
**SMS Management inbox read fix
 
**Wireless scan fix
 
**SSTP service update
 
**SMS-Utilities: various functionality fixes
 
**Restore-Point: Removed the ability to load restore points of a different router
 
**VLAN: LAN Network configuration backup fix
 
**Maximum length SMS message send fix
 
**Long SMS messages stretch out WebUI fix
 
**Ping Reboot: reboots after service is disabled fix
 
**Removed warning message when scanning for WiFi STA
 
**Setup Wizard WiFi channel select custom option remove fix
 
**Call Utilities: double zero in front of the number fix
 
**Setup Wizard: you cannot procceed with setup if you disable DHCP fix
 
**Restore to default percentage counting fix
 
**WoL: Use WAN as LAN fix
 
**Network Operators: Typo fix
 
**Events log: Typo fixes
 
**Hotspot Statistics: WebUI shows WiFi AP's and STA when they are not a hotspot fix
 
**Hotspot: configuration saves without advertisement address fix
 
**WiFi channel frequency display fix
 
**Mobile Traffic: daily statistics show wrong time fix
 
**STunnel text display fix
 
**IPSec text display fix
 
**OpenVPN remove TLS clients in TAP mode fix
 
**Hotspot: Tab placement fix
 
**Overview: Text changes
 
**SMS-Utilities: 'uci show' fix
 
**WebUI: added connection band info to mobile status page
 
**Mobile: fix for LTE band default value for different regions
 
**RMS: fixed logread messages
 
**I/O: fixed output state labels
 
 
===='''[[Media:RUT2XX R 00.01.05.1 WEBUI.bin|RUT2XX_R_00.01.05.1]]''' | 2019.02.22====
 
 
*New features:
 
**Added Wake on LAN functionality
 
**Added Wake on LAN SMS Utilities rule
 
**Added STunnel feature to VPN services
 
 
*Improvements:
 
**Added every WAN interface selection to Qos
 
**Add modem restart option to Periodic Reboot
 
**Updated curl to version 7.64.0
 
**Updated OpenSSL to version 1.0.2q
 
 
*Fixes:
 
**L2TP network restart after connection loss fix
 
**OpenVPN service restart when TLS-Password is changed fix
 
**Mobile IP and gateway fix
 
**Overview OpenVPN widget display fix
 
**IPSec psk_key save after older firmware upgrade fix
 
**Configuration backup and firmware upgrade stuck on the 'downloading' page fix
 
**SNMP memory leak fix
 
**Mobile data limit keep limit after firmware upgrade with keep settings fix
 
**Remote access information fix
 
**L2TP IP range change fix
 
**Setup Wizard → LAN DHCP fields not hidden when DHCP is unchecked fix
 
**Hotspot firewall rules fix
 
**Data-only SIM fix
 
**Wireless Station and Access Point fixes
 
**Deleted unnecessary IPsec keep alive option
 
**Fixed GRE Tunnel connection
 
**Removed NOTRACK target from firewall rules
 
**WAN IP not showing on Login page fix
 
**DDNS process kill fix
 
**WAN selected as LAN fix
 
**IPSec restart when backup mobile fails fix
 
**RMS memory usage fix
 
**CLI Connect button fix
 
**Mobile traffic counter resetting fix
 
**Multiple OpenVPN related fixes
 
**Ping Reboot fix
 
 
===='''[[Media:RUT2XX R 00.01.04.2 WEBUI.bin|RUT2XX_R_00.01.04.2]]''' | 2018.12.20====
 
 
*Fixes:
 
**SSH security fix
 
**Mobile page fix
 
 
===='''[[Media:RUT2XX R 00.01.04.1 WEBUI.bin|RUT2XX_R_00.01.04.1]]''' | 2018.11.15====
 
 
 
*New features:
 
**Added NTP server, force servers option for ntpclient
 
**Added selectable network band support
 
**Added SSTP
 
**Replace bird routing package with quagga package
 
**Added WiFi MAC Filter address range support
 
**Changed RMS communication protocol to use MQTT instead of OpenVPN
 
**Enabled SSH diffie-hellman-group14-sha1 key exchange algorithm
 
 
*Improvements
 
**Updated mobile operator database
 
**Enabled Wired (Main) + Mobile (Failover) multiwan in default configuration
 
**Sensitive information (usernames and passwords) removed from router's Troubleshoot file
 
**Added warnings to Call Utilities when on 4G-only mode
 
 
*Fixes:
 
**Fixed multiwan restart sequence issues causing VPN instabilities
 
**Static Routes fix
 
**WiFi updates and security fixes
 
**Minor improvements and bug fixes for operator selection
 
**SNMP MIB values and file format fix
 
**SNMP Hotspot and serial values fix
 
**Redirect to login page after factory reset fix
 
**IPsec init script fix
 
**Overview WiFi widget fix
 
**Modbus WiFi enable/disable fix
 
**Modbus APN write and memory leak fixes
 
**JavaScript code multiplication fix
 
**DHCP server lease time validation update fix
 
**Hang up on watchdog reset fix
 
**Overview mobile WAN IP display fix
 
**curl: update to 7.62.0
 
**OpenSSL: update to 1.0.2p
 
**cacert: update to 2018-10-17
 
**arptables segmentation fault fix
 
**quectel-CM: updated to latest version
 
**GRE Tunnel delete after button press fix
 
**Update Teltonika contact address in Licenses page
 
**Disabled passthrough and bridge selection when multiwan is enabled
 
**Fixed lua dispatcher error after reboot
 
**Fixed multiwan metrics and priorities
 
**SMS Utilities SMS status WAN IP with multiwan fix
 
 
===='''[[Media:RUT2XX R 00.01.03.5 WEBUI.bin|RUT2XX_R_00.01.03.5]]''' | 2018.10.23====
 
 
*Fixes:
 
**VPN shutdown at delete fix
 
**PPTP default gateway set and delete fix
 
**OpenVPN status fix
 
**OpenVPN configuration section name compatibility fix
 
**IPsec redirect after save fix
 
**Overview VRRP widget status fix
 
**Hotspot start after reboot fix
 
**Added default LAN IPv6 address
 
**Overview WAN wiki link fix
 
**Hotspot overview fix
 
**Mobile data counter reset fix
 
 
===='''[[Media:RUT2XX R 00.01.03.2 WEBUI.bin|RUT2XX_R_00.01.03.2]]''' | 2018.09.05====
 
 
*New features:
 
**Added operators control with white/black list feature
 
**Added Administration -> Root CA page
 
 
*Improvements:
 
**Added many security updates
 
**Added firmware update information
 
**Added CellID information to Troubleshoot file
 
 
*Fixes:
 
**GPL: compilation fixes
 
**Configuration restore fix
 
**Disabled Hotspot users' ability to reach LAN devices and WebUI
 
**Port Forwarding IP validation fix
 
**System -> Administration -> Overview page loading fix when VPN configuration exists
 
**Some minor DHCP display fixes
 
**Call Utilities reboot action partial message fix
 
**DDNS IP source change and added time selection
 
**OpenVPN service fixes
 
**Some minor QoS fixes
 
**Some minor OpenVPN fixes
 
**Configuration Wizard: LAN page redirect fix
 
**Overview WAN IP fix
 
**Added Redirect to HTTPS information
 
**Troubleshoot TCPdump fix
 
**Changed 'Backup WAN' to 'WAN Failover'
 
**WebUI: language translation in some pages fix
 
**Hotspot: SMS OTP authentication fix (Mantis ID: 0022367)
 
**Overview VPN widget IP fix
 
 
===='''[[Media:RUT2XX R 00.01.02.6 WEBUI.bin|RUT2XX_R_00.01.02.6]]''' | 2018.08.22====
 
 
*Fixes:
 
**Fixed GPL Readme
 
**Fixed JavaScript password validation
 
 
===='''[[Media:RUT2XX R 00.01.02.3 WEBUI.bin|RUT2XX_R_00.01.02.3]]''' | 2018.06.08====
 
 
*Fixes:
 
**Fixed RMS status in overview page
 
**Fixed LTE signal strength graph
 
 
===='''[[Media:RUT2XX R 00.01.01.4 WEBUI.bin|RUT2XX_R_00.01.01.4]]''' | 2018.05.16====
 
 
*New features:
 
**Added DHCP Force option
 
**Added RMS connection page to Setup Wizard
 
**Added forced password change
 
 
*Improvements:
 
**Updated Overview widget icons, added Teltonika Wiki links
 
**Added private key decryption function to OpenVPN client configuration
 
**Added additional DPD options
 
 
*Fixes:
 
**Fixed Wget reboot URL datatype
 
**WebUI: SSH access status fix
 
**Added special symbols exception to SMS-Forwarding
 
**Added missing Events Reporting config for SMS-Utilities
 
**PPP enable/disable bug fix
 
**Multiple Call Utilities fixes
 
**SMS event queries fix
 
**Removed unnecessary sim_switch message text
 
**Some SSH security fixes
 
**Updated Modbus sources and coding table
 
**Multiple OpenVPN bug fixes
 
**Graphs/Signal strength fix when using HSDPA+HSUPA network type
 
**Fixed VLAN DHCP leasing
 
**Administration password change fix
 
**STA mode logic changed
 
**Hotspot bandwith limit fix
 
**Moved IP alias gateway to advanced features
 
**Administration -> Overview fix
 
**Factory reset fix due to mobile connection problems
 
 
===='''[[Media:RUT2XX R 00.01.00 WEBUI.bin|RUT2XX_R_00.01.00]]''' | 2018.03.19====
 
 
*Improvements:
 
**Added hostname validation for Wget Reboot
 
**New versioning logic
 
 
*Fixes:
 
**Output ON/OFF fix
 
**Firmware Upgrade fix
 
**SSH authentication logging fix
 
 
===='''[[Media:RUT2XX R 00.00.553 WEBUI.bin|RUT2XX_R_00.00.553]]''' | 2018.03.09====
 
 
*New features:
 
**Added Redirect LAN to GRE function
 
 
*Fixes:
 
**Mobile Data Limit fixes
 
**User's password removed from users table
 
**Firmware upgrade message fixed
 
 
===='''[[Media:RUT2XX R 00.00.539 WEBUI.bin|RUT2XX_R_00.00.539]]''' | 2018.03.01====
 
 
*Fixes:
 
**Minor Openvpn functionality fixes
 
 
===='''[[Media:RUT2XX R 00.00.486 WEBUI.bin|RUT2XX_R_00.00.486]]''' | 2018.02.27====
 
 
*New features:
 
**Added two additional fields to Hotspot Landing Page link configuration (SMS have password, SMS no password )
 
 
===='''[[Media:RUT2XX R 00.00.482 WEBUI.bin|RUT2XX_R_00.00.482]]''' | 2018.02.22====
 
 
*Fixes:
 
**Updated SMS send satus
 
**Added Modbus enable check-box
 
**Added firewall rule so the router would be reachable from WAN when access control is enabled
 
 
===='''[[Media:RUT2XX R 00.00.474 WEBUI.bin|RUT2XX_R_00.00.474]]''' | 2018.02.20====
 
 
*Improvements:
 
**Added download MIBS button to SNMP page
 
 
*Fixes:
 
**Fixed style for VPN service pages, Modbus page
 
 
===='''[[Media:RUT2XX R 00.00.388 WEBUI.bin|RUT2XX_R_00.00.388]]''' | 2018.02.19====
 
 
*New features:
 
**Added Relayd function that can make the router act like a wireless range extender
 
 
===='''[[Media:RUT2XX R 00.00.382 WEBUI.bin|RUT2XX_R_00.00.382]]''' | 2018.02.06====
 
 
*Fixes:
 
**Fixed Wi-Fi logging to FTP function
 
**Fixed site blocking file parsing
 
**System Information texts fix
 
 
===='''[[Media:RUT2XX R 00.00.377 WEBUI.bin|RUT2XX_R_00.00.377]]''' | 2018.01.31====
 
 
*New features:
 
**IPsec: added Transport mode, Firewall options, local IP management options
 
 
*Improvements:
 
**Moved Disable NAT flags from VPN to Firewall page
 
 
*Fixes:
 
**Fixed Firewall config for hotspot interface assignment
 
**DMZ rule position fix
 
 
===='''[[Media:RUT2XX R 00.00.372 WEBUI.bin|RUT2XX_R_00.00.372]]''' | 2018.01.16====
 
 
*Improvements:
 
**Added binero.se to DDNS service providers list
 
**Added some additional SMS Utilities hints
 
**Added support for changing Wireless SSID name from branding script
 
**Improved Email to SMS function
 
 
*Fixes:
 
**WAN port status display fix
 
**Fixed SMS Utilities Write to config bug when sending mobileoff message
 
**Whitelist blocking fix in Site Blocking
 
 
===='''[[Media:RUT2XX R 00.00.355 WEBUI.bin|RUT2XX_R_00.00.355]]''' | 2018.01.05====
 
 
*New features:
 
**Added WPA-Enterprise encryption type support for Wi-Fi Access Points
 
**Added Email To SMS, SMS Forwarding functions
 
**Added Wget Reboot function
 
 
*Improvements:
 
**Updated fw upgrade validation for future firmwares
 
 
*Fixes:
 
**Fixed bug of not being able to use hostnames as a destination for Ping Reboot
 
**Input/Output Scheduler backup bug fix
 
**System->Administration page style fixes
 
**Removed wifid due to security issues
 
**Configuration Backup bug fixes
 
 
===='''[[Media:RUT2XX R 00.00.339 WEBUI.bin|RUT2XX_R_00.00.339]]''' | 2018.01.02====
 
 
*New features:
 
**Added IPsec option for WebUI access through tunnel
 
**Added Reset button custom hold time configuration
 
 
*Fixes:
 
**Minor Mobile Data Limit bug fix
 
**Renamed mibs file to TLT-MIB.txt
 
**Temperature display fix
 
**Added Async Control Character Maps
 
**Fixed minor grammatical errors in the WebUI
 
**OpenVPN hints fix
 
 
===='''[[Media:RUT2XX R 00.00.312 WEBUI.bin|RUT2XX_R_00.00.312]]''' | 2017.12.08====
 
 
*Fixes:
 
**Some minor PPTP Server and Client functionality fixes
 
**Added fix to PPP Connection Type due to disconnecting mobile connection
 
**Real traffic fix
 
 
===='''[[Media:RUT2XX R 00.00.307 WEBUI.bin|RUT2XX_R_00.00.307]]''' | 2017.12.05====
 
 
*New features:
 
**Added Hotspot configuration profiles
 
 
*Improvements:
 
**Added custom redirect address
 
**Added troubleshoot file download protection
 
 
*Fixes:
 
**Some minor Hotspot functionality fixes
 
**Mobile data logging fix
 
**Some minor Dynamic DNS functionality fixes
 
 
===='''[[Media:RUT2XX R 00.00.296 WEBUI.bin|RUT2XX_R_00.00.296]]''' | 2017.11.23====
 
 
*Improvements:
 
**SMS Utilities fw_upgrade rule now works with Keep Settings
 
 
*Fixes:
 
**Minor Reregister function fix
 
**Use IPv4 only fix
 
**Minor mobile interface fix
 
**Some minor Site Blocking fixes
 
**Connect to hidden WiFi AP fix
 
**Multiwan metric change fix for RUT230
 
 
===='''[[Media:RUT2XX R 00.00.284 WEBUI.bin|RUT2XX_R_00.00.284]]''' | 2017.11.03====
 
 
*Improvements:
 
**Improved Mobile Data Limit functionality
 
**Improved Load Balancing functionality
 
<!--
 
 
===Bootloader Change Log===
 
----
 
'''NOTE''': there are two Bootloader files in the archive. Which file should be used depends on circumstances. More details on this and how to upgrade the Bootloader to a newer version can be found '''[[RUT2xx Bootloader Upgrade|here]].'''
 
 
===='''[[Media:U-boot_mod_tlt_rut200_3.2.2.zip|RUT2XX Bootloader version 3.2.2]]''' | 2020.03.06====
 
 
*Improvements:
 
**Updated links to teltonika-networks.com
 
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.2.1]]''' | 2019.12.10====
 
 
*New features:
 
**Added all LED indication on device power on.
 
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 3.1.0]]''' | 2019.03.28====
 
 
*Improvements:
 
**Improvements made to the boot up process
 
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.1]]''' | 2017.07.19====
 
 
*New features:
 
**Added GigaDevice flash support
 
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 2.0.0]]''' | 2017.04.26====
 
 
*Improvements:
 
**Increased CPU clock speed to 400MHz
 
 
===='''[[RUT2xx old Bootloaders|RUT2XX Bootloader version 1.0.0]]''' | 2017.04.14====
 
 
*New features:
 
**Released U-boot
 
-->
 

Revision as of 12:52, 5 January 2022

RUT2_R_00.07.01.2 | 2022.01.04

  • New features
    • DFOTA modem upgrade system for Quectel modems
  • Improvements
    • Removed L2TP section title prefixes
  • Fixes
    • Fixed IPSec crashing issue using mobile
    • Fixed FW flashing when chip is in unknown state
    • Fixed CPU usage percentage display in the Overview page
    • Fixed FOTA timeout issue when server does not respond
    • Fixed installation of backup packages
    • Fixed mobile data limit display after profile change
    • Fixed Bridge mode without multi-APN
    • Fixed multi mobile interface checking
    • Fixed error handling when the modem is not responding
    • Prolonged autoconnect setting timeout

RUT2_R_00.07.01 | 2021.11.18

Note: Firmware version RUT2_R_00.07.01 released on 2021.11.18 was removed due to an issue with IPsec tunnel while using mobile connection.