Template:Networking rut2xx first start hardware installation

From Teltonika Networks Wiki
Revision as of 15:11, 28 October 2022 by RytisB (talk | contribs) (→‎Hardware installation)

(diff) ← Older revision | Approved revision (diff) | Latest revision (diff) | Newer revision → (diff)

Video Quick Start Guide

Need some help setting up your new Teltonika Networks TRB500 Industrial 5G Gateway? Watch our quick start guide video and follow the step-by-step instructions to easily set up your new gateway for operation.


Hardware installation

  1. Remove the SIM card slot tray with the pin needle. Insert your SIM card and push the tray back into the router. Correct SIM card orientation can be seen in the figure below:
    [[File:{{{file_sim}}}|{{{size_sim}}}px]]
  2. Attach 3G and WiFi antennas
  3. Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a power outlet.
  4. Connect to the device wirelessly (SSID: {{{name}}}_****) or use an Ethernet cable.