Difference between revisions of "Template:Networking rut2xx manual modbus modbus tcp table"

From Teltonika Networks Wiki
(Created page with "<table class="nd-mantable"> <tr> <th>field name</th> <th>value</th> <th>description</th> </tr> <tr> <td>Enable</td> <td>yes...")
 
Line 23: Line 23:
 
     <td>Mobile Traffic Usage Logging</td>
 
     <td>Mobile Traffic Usage Logging</td>
 
         <td>yes | no; Default: <b>no</b></td>
 
         <td>yes | no; Default: <b>no</b></td>
         <td>Enables Mobile Traffic Usage Logging (can also be enabled from <b>Status → Mobile Traffic → Configuration</b>). <br> This is required in order to read mobile data usage information from Modbus registers</td>
+
         <td>Enables Mobile Traffic Usage Logging (can also be enabled from <b>Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]</b>). <br> This is required in order to read mobile data usage information from Modbus registers</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>

Revision as of 13:20, 5 December 2018

field name value description
Enable yes | no; Default: none Toggles Modbus TCP ON or OFF
Port integer [0..65535]; Default: none Specifies which port will be used for Modbus communication
Allow Remote Access yes | no; Default: no Allows remote Modbus connections by adding an exception to the device's firewall on the port specified in the field above
Mobile Traffic Usage Logging yes | no; Default: no Enables Mobile Traffic Usage Logging (can also be enabled from Status → Mobile Traffic → [[{{{name}}}_Mobile_Traffic#Configuration|Configuration]]).
This is required in order to read mobile data usage information from Modbus registers