0
edits
Changes
Template:Networking rut955 manual modbus serial (view source)
Revision as of 18:50, 9 March 2020
, 18:50, 9 March 2020no edit summary
==Configuring Modbus serial slave device==
==Configuring Modbus serial slave device==
In this example we are going to be using our Windows 10 computer as a slave. To do so you will need to download and install '''modRSsim''' application, which you can download [https://sourceforge.net/projects/modrssim/ here].
In this example we are going to be using our Windows 10 computer as a slave. To do so you will need to install '''modRSsim''' application, which you can download [https://sourceforge.net/projects/modrssim/ here].
When you are done with that, open the app and apply the following configuration:
[[File:|border|class=tlt-border]]
# Select '''Protocol''' (MODBUS RS-232).
# Click '''Setup the communication Serial or TCP/IP port'''.
[[File:|border|class=tlt-border]]
# Select the '''Port''' which you connected RS232 cable to (to find which port you are using go to Windows search bar and write '''Device Manager''' then select '''Ports''' and see which one you are using).
# Select '''Parity''' (Even).
# Click '''OK'''.
