0
edits
Changes
Template:Networking rut955 manual modbus serial (view source)
Revision as of 18:54, 9 March 2020
, 18:54, 9 March 2020no edit summary
In this example we are going to be using our Windows 10 computer as a slave. To do so you will need to install '''modRSsim''' application, which you can download [https://sourceforge.net/projects/modrssim/ here].
In this example we are going to be using our Windows 10 computer as a slave. To do so you will need to install '''modRSsim''' application, which you can download [https://sourceforge.net/projects/modrssim/ here].
When you are done with that, open the app and apply the following configuration:
When you are done with that, open the app and apply the following configuration.
[[File:|border|class=tlt-border]]
[[File:|border|class=tlt-border]]
# Select '''Parity''' (Even).
# Select '''Parity''' (Even).
# Click '''OK'''.
# Click '''OK'''.
==Configuring Modbus serial master==
Open router’s WebUI, navigate to '''Services > Modbus > Modbus Serial Master''' and apply the following configuration.
[[File:|border|class=tlt-border]]
# Press '''Enable'''.
# Select '''Baud rate''' (9600, it must match slave‘s baud rate).
# Select '''Parity''' (Even).
# Press '''Save'''.
Now create '''RS232 slave''' by writing a name, pressing '''Add''' button. It should appear like in the example and then press '''Edit'''.
[[File:|border|class=tlt-border]]