Template:Networking rut956 first start configure your computer

From Teltonika Networks Wiki
Revision as of 09:56, 11 January 2022 by Martynas.siksnius (talk | contribs)

This Wiki page contains the online version of the Quick Start Guide (QSG) for the RUT956 LTE Router. Here you will find an overview of the various components found on the front and back sides of a RUT956 device, basic hardware installation, first login information, device specifications and general safety information. It is highly recommended that you acquaint yourself with with the Quick Start Guide before using the device. If you own a RUT956 device, you can also find a printed version of the Quick Start Guide in the device's package.

Rut956 hd 4 demo.png

Front view

No. Description
1 LAN Ethernet ports
2 WAN Ethernet port
3 LAN LEDs
4 WAN LED
5 RS485 interface
Networking rut956 manual panels front v1.png
6 Power socket
7 RS232 interface
8 Input/Output connector
9 Power LED
10 Mobile connection status LED
11 Mobile signal strength indication LEDs

Back view

No. Description
Networking rut956 manual panels back v1.png
1 LTE antenna connectors
2 GPS antenna connector
3 USB connector
4 WiFi antenna connectors
5 Reset button
6 SIM card slots

Connectors

Power socket pinout
Trb142 power socket pinout v3.png
No. Description Wire color
1 Power Red
2 Ground Black
3 I/O Green
4 I/O White
.

Hardware installation

  1. Remove the SIM card slot tray(s) with the pin needle. Insert your SIM card(s) and push the tray(s) back into the router. Correct SIM card orientation can be seen in the figure below:
    500px
  2. Attach LTE, WiFi and GPS antennas
  3. Connect the power adapter to the power socket located on the front panel of the device. Then plug the other end of the power adapter into a power outlet.
  4. Connect to the device wirelessly (SSID: RUT956_****) or use an Ethernet cable.

Template loop detected: Template:Networking device first start

Safety information

The RUT956 router must be used in compliance with any and all applicable national and international laws and with any special restrictions regulating the utilization of the communication module in prescribed applications and environments.

Radio specifications
RF technologies GSM, GPRS, EDGE, UMTS/HSPA+, LTE, GNSS, WiFi
Max. RF power 33 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE, 20 dBm@WiFi
Bundled accessories specifications*
Power AC/DC power adapter 9 V 1 A, 4 pin plug
GSM/WCDMA/LTE antenna 698~868/1850~2690 MHz, 50 Ω, VSWR < 2, gain** 2 dBi, omnidirectional, SMA male connector
WiFi antenna 2400~2483.5 MHz, 50 Ω, VSWR < 2, gain** 2 dBi, omnidirectional, RP-SMA male connector
GNSS antenna 1575.42~1602 MHz, 2.2~5 VDC, VSWR < 1.5, active total gain** 28 dB (typ.), RHCP polarization, SMA male connector

* Order code dependent.

** Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.

Qsg rut950 manual.PNG This sign on the package means that is necessary to read the User's Manual before you start using the device

Qsg rut950 recycle.PNG This sign on the package means that all used electronic and electric equipment should not be mixed with general household waste

Qsg rut950 ce.PNG Hereby, Teltonika declares that the radio equipment type RUT955 is in compliance with Directives: 2014/53/EU, 2014/35/EU, 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address: https://teltonika-networks.com/product/rut956/