0
edits
Changes
Template:Networking rut9xx manual mobile (view source)
Revision as of 15:46, 25 August 2020
, 15:46, 25 August 2020→Network Operators
----
----
The <b>Mobile Configuration</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
The <b>Mobile Configuration</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
{{#ifeq:{{{series}}}|RUT9xx|
[[File:{{{file_general_configuration}}}|border|class=tlt-border]]|
[[File:{{{file_general_configuration}}}]]
[[File:{{{file_general_configuration}}}]]
}}
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>Dialing number</td>
<td>Dialing number</td>
<td>string; default: <b>none</b></td>
<td>string; default: <b>none</b></td>
<td>A [[How_to_execute_dialling_codes%3F|dial code]] used to establish a mobile PPP connection.</td>
<td>A [[Dial Codes|dial code]] used to establish a mobile PPP connection.</td>
</tr>
</tr>
<tr>
<tr>
==Network Operators==
==Network Operators==
The <b>Network Operators</b> tab provides you with the possibility to scan for and manually manage mobile network opertors to which the router's SIM card can connect to. Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the primary SIM in the [[#SIM_Management|SIM Management]] section.
The <b>Network Operators</b> tab provides you with the possibility to scan for and manually manage mobile network operators to which the router's SIM card can connect to. Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the primary SIM in the [[#SIM_Management|SIM Management]] section.
===Scan For Network Operators===
===Scan For Network Operators===
Below the list you can select how to the router should connect to network operators:
Below the list you can select how to the router should connect to network operators:
{{#ifeq:{{{series}}}|RUT9xx|
[[File:{{{file_network_operators_settings}}}|border|class=tlt-border]]|
[[File:{{{file_network_operators_settings}}}]]
[[File:{{{file_network_operators_settings}}}]]
}}
The 'Reconnect interval' box specifies how often the device will attempt to reconnect to a network operator, while the 'Connection mode' specifies the logic of how the router will connect operators:
The 'Connection mode' specifies the logic of how the router will connect operators:
<ul>
<ul>
