Template:Networking rut configuration example openvpn bridge use case

From Teltonika Networks Wiki
Networking RUTX VPN between HQ topology v3.png

Configuration overview and prerequisites

Prerequisites:

  • One RUTxxx router
  • A Public Static or Public Dynamic IP addresses
  • An end device to configure the router (PC, Laptop, Tablet, Smartphone)

The topology above depicts the OpenVPN scheme. - The router with the Public IP address ({{{name}}}) acts as the OpenVPN server and other {{{name}}} acts as client. OpenVPN connects the networks of HQ Office and Remote Office. Only LAN traffic is going to go through that tunnel, any other WAN traffic won't go through it. This way the VPN tunnel will not be under a huge load and will provide greater speeds.

When the scheme is realized, remote office workers will be able to reach HQ’s internal network with all internal systems, allowing working from remote office to be possible.

Configuring HQ office router

OpenVPN

LAN

Configuring remote office router

OpenVPN

LAN

Results

Networking rut configuration example openvpn bridge use case 1 v1.png Networking rut configuration example openvpn bridge use case 2 v1.png Networking rut configuration example openvpn bridge use case 3 v1.png Networking rut configuration example openvpn bridge use case 4 v1.png Networking rut configuration example openvpn bridge use case 5 v1.png Networking rut configuration example openvpn bridge use case 6 v1.png Networking rut configuration example openvpn bridge use case 7 v1.png Networking rut configuration example openvpn bridge use case 8 v1.png

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rut_configuration_example_openvpn_bridge_use_case&oldid=60614"