Changes

{{Template: Networking_rutxxx_manual_fw_disclosure

{{Template: Networking_rutos_manual_fw_disclosure

| fw_version = {{#switch: {{{series}}}

| fw_version = {{#switch: {{{series}}}

   | RUT2XX = {{{series}}}_R_00.01.13

   | RUT2XX = {{{series}}}_R_00.01.14.3

   | RUT9XX = {{{series}}}_R_00.06.07}}

   | RUT9XX = {{{series}}}_R_00.06.08.2}}

}}

}}

==Summary==

==Summary==

     <tr>

     <tr>

       <td>Dialing number</td>

       <td>Dialing number</td>

       <td>string; default: <b>none</b></td>

       <td>string; default: <b>*99#</b></td>

       <td>A [[Dial Codes|dial code]] used to establish a mobile PPP connection.</td>

       <td>A [[Dial Codes|dial code]] used to establish a mobile PPP connection.</td>

     </tr>

     </tr>

         <td>yes | no; default: <b>no</b></td>

         <td>yes | no; default: <b>no</b></td>

         <td>When enabled, this option prevents the device from establishing a mobile data connection while not in your home network (roaming conditions).</td>

         <td>When enabled, this option prevents the device from establishing a mobile data connection while not in your home network (roaming conditions).</td>

     </tr>

     </tr>{{#ifeq: {{{series}}} | RUT9XX |

     <tr>

     <tr>

     <td>Use IPv4 only</td>

     <td>Use IPv4 only</td>

         <td>yes | no; default: <b>yes</b></td>

         <td>yes {{!}} no; default: <b>yes</b></td>

         <td>When enabled, this makes the device only use IPv4 settings for the mobile connection.</td>

         <td>When enabled, this makes the device only use IPv4 settings for the mobile connection.</td>

     </tr>

     </tr>|}}

</table>

</table>

<font size="-1"><span class="asterisk">*</span> more on Passthrough mode in [[#Passthrough_mode|section {{#ifeq:{{{3g}}}|0|2.5|2.3}}]] of this page.</font><br>

<font size="-1"><span class="asterisk">*</span> more on Passthrough mode in [[#Passthrough_mode|section {{#ifeq:{{{3g}}}|0|2.5|2.3}}]] of this page.</font><br>

     </tr>

     </tr>

     <tr>

     <tr>

     <td>Phone number</td>

         <td>phone number; default: <b>none</b></td>

         <td>Recipient's phone numbers.</td>

     <td>Phone number/Group</td>

         <td>phone number | group; default: <b>none</b></td>

         <td>Recipient's phone number or a group of recipients.</td>

     </tr>

     </tr>

</table>

</table>

The <b>Clear Data Limit</b> section contains only one button - 'Clear data limit'. When clicked, the button resets the data limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.

The <b>Clear Data Limit</b> section contains only one button - 'Clear data limit'. When clicked, the button resets the data limit counter for the related SIM card. Thus, the count is started over again regardless of the specified period.

[[File:Networking_{{lc:{{{{series}}}}}_manual_mobile_mobile_data_limit_clear_data_limit.png|border|class=tlt-border]]

[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_mobile_data_limit_clear_data_limit.png|border|class=tlt-border]]

<b>Important</b>: remember that the 'Clear data limit' button doesn't clear the actual data usage statistics for the SIM card, only the data counters as calculated by the router.

<b>Important</b>: remember that the 'Clear data limit' button doesn't clear the actual data usage statistics for the SIM card, only the data counters as calculated by the router.

{{#ifeq: {{{series}}} | RUT9 |

{{#ifeq: {{{series}}} | RUT9XX |

==SMS Limit==

==SMS Limit==

     <tr>

     <tr>

     <td>Authentication method</td>

     <td>Authentication method</td>

         <td>CHAP | PAP | None; default: <b>None</b></td>

         <td>CHAP {{!}} PAP {{!}} None; default: <b>None</b></td>

         <td>Authentication method that your GSM carrier uses to authenticate new connections on its network. If you select PAP or CHAP, you will also be required to enter a username and password.</td>

         <td>Authentication method that your GSM carrier uses to authenticate new connections on its network. If you select PAP or CHAP, you will also be required to enter a username and password.</td>

     </tr>

     </tr>

     <tr>

     <tr>

       <td>Service mode</td>

       <td>Service mode</td>

       <td>2G only | 2G preferred | 3G only | 3G preferred | 4G (LTE) only | 4G (LTE) preferred | Automatic; default: <b>4G (LTE) preferred</b></td>

       <td>2G only {{!}} 2G preferred {{!}} 3G only {{!}} 3G preferred {{!}} 4G (LTE) only {{!}} 4G (LTE) preferred {{!}} Automatic; default: <b>4G (LTE) preferred</b></td>

       <td>Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE), you can specify to which type of network you wish to connect to. For example, if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity.</td>

       <td>Your service mode preference. If your local mobile network supports 2G, 3G and 4G (LTE), you can specify to which type of network you wish to connect to. For example, if you choose 2G only, the router will connect to a 2G network, so long as it is available, otherwise it will connect to a network that provides better connectivity. If you select Automatic, then the router will connect to the network that provides the best connectivity.</td>

     </tr>

     </tr>

<b>[[How to set up a USB modem|Click here]]</b> for step-by-step instructions on USB modem setup.

<b>[[How to set up a USB modem|Click here]]</b> for step-by-step instructions on USB modem setup.

|}}

|}}

 

{{#ifeq:{{{legacy}}}|1||[[Category:{{{name}}} Network section]]}}

[[Category:{{{name}}} Network section]]