Template:Networking rut manual qos

The information in this page is updated in accordance with the [[Media:_WEBUI.bin|]] firmware version.

Summary

QoS provides the possibility to prioritize network traffic based on hosts, ports or services and limit download & upload speeds on a selected interface.

This chapter of the user manual provides an overview of the QoS page in {{{name}}} devices.

Interfaces

The Interfaces section is used to set up download and upload speed limits on the device's network interfaces.

Field	Value	Description
Interface	WAN | LAN | WiFi_WAN | Mobile; default: none	Interface to which the rule applies.
Enable	yes | no; default: no	Turns the rule on or off.
Calculate overhead	yes | no; default: no	Decreases upload and download ratio to prevent link saturation.
Download speed (kbit/s)	integer; default: none	Maximum download speed for the specified interface.
Upload speed (kbit/s)	integer; default: 128	Maximum upload speed for the specified interface,

Classification Rules

Field	Value	Description
Target	Priority | Express | Normal | Low; default: Normal	Target to which the rule will be applied.
Source host	All | ip; default: All	Host(s) from which data will be transmitted.
Destination host	All | ip; default: All	Host(s) to which data will be transmitted
Protocol	All | TCP | UDP | ICMP | -- custom --; default: All	Data transmission protocol to match the rule.
Ports	All | integer [0..65535]; default: All	Port number(s) to match the rule. You can enter multiple ports by separating them by commas (e.g., 22,53,80).
Number of bytes	integer; default: none	Maximum number of bytes for this connection.

[[Category:{{{name}}} Services section]]