Changes

==Summary==

==Summary==

You will be greeted with the Setup Wizard the first time you login, after you have changed the router's default password. On other logins you will be redirected to the [[{{{name}}} Overview|Overview]] page, but you can reach the Setup Wizard any time via the <i>System → <b>Setup Wizard</b></i> page.

You will be greeted with the Setup Wizard the first time you login, after you have changed the router's default password. On other logins you will be redirected to the [[{{{name}}} Overview|Overview]] page, but you can reach the Setup Wizard any time via the <i>System → <b>Setup Wizard</b></i> page.

This page is an overview of the Setup Wizard tool for {{{name}}} routers.  

This chapter of the user manual provides an overview of the Setup Wizard page for {{{name}}} devices.

 

==Set new password==

==Set new password==

</ul>

</ul>

[[File:{{{file_password}}}]]

[[File:Networking_rutxxx_manual_setup_wizard_password_v1.png]]

After you have entered the new password, click 'Save'. Afterwards you will be redirected to the first page of the Setup Wizard.

After you have entered the new password, click 'Save'. Afterwards you will be redirected to the first page of the Setup Wizard.

The <b>General</b> section is used to configure the router's time settings.

The <b>General</b> section is used to configure the router's time settings.

[[File:{{{file_general}}}]]

[[File:Networking_rutxxx_manual_setup_wizard_general_gps_{{{gps}}}.png]]

If you wish to set the router's time zone settings later instead, you can do so via the <i>Services → [[{{{name}}} NTP|NTP]]</i> page.

If you wish to set the router's time zone settings later instead, you can do so via the <i>Services → [[{{{name}}} NTP|NTP]]</i> page.

The <b>Mobile</b> section is used to configure the router's SIM card parameters.

The <b>Mobile</b> section is used to configure the router's SIM card parameters.

[[File:{{{file_mobile}}}]]

|[[File:Networking_{{lc:{{{series}}}}}_manual_setup_wizard_mobile_v1.png|border|class=tlt-border]]

 

<table class="nd-mantable">

<table class="nd-mantable">

         <th>Description</th>

         <th>Description</th>

     </tr>

     </tr>

{{#ifeq:{{{series}}}|RUT2xx|

        <td>checkbox; default: <b>enabled</b></td>

     <tr>

     <tr>

     <td>APN</td>

     <td>APN</td>

         <td>string; default: <b>none</b></td>

         <td>string; default: <b>none</b></td>

         <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to enter the APN just to complete the registration to a network. In other cases an APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br><b>Important note</b>: an APN Network Identifier cannot start with any of the following strings: "rac", "lac", "sgsn" or "rnc"; it cannot end in ".gprs" and it cannot take the value "*".</td>

         <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to enter the APN just to complete the registration to a network. In other cases an APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br><b>Important note</b>: an APN Network Identifier cannot start with any of the following strings: "rac", "lac", "sgsn" or "rnc"; it cannot end in ".gprs" and it cannot take the value "*".

        </td>

     </tr>

     </tr>

     <tr>

     <tr>

     <td>PIN number</td>

     <td>PIN number</td>

         <td>string; default: <b>none</b></td>

         <td>string; default: <b>none</b></td>

         <td>A 4-digit long numeric password used to authenticate the modem to the SIM card.</td>

         <td>A numeric password used to authenticate the modem to the SIM card.</td>

     </tr>

     </tr>

     <tr>

     <tr>

     <tr>

     <tr>

     <td>Service mode</td>

     <td>Service mode</td>

        <td>2G only | 3G only | {{#ifeq:{{{3g}}}|1||4G (LTE) only | }}}Automatic; default: <b>Automatic</b></td>

|<td>2G only {{!}} 3G only {{!}} 2G + 3G {{!}} Automatic; default: <b>Automatic</b></td>

|<td>2G only {{!}} 3G only {{!}} 4G (LTE) only {{!}} 2G + 3G {{!}} 2G + 4G {{!}} 3G + 4G {{!}} Automatic; default: <b>Automatic</b></td>

         <td>Preffered service type.</td>

         <td>Preffered service type.</td>

     </tr>

     </tr>

==LAN==

==LAN==

The <b>LAN</b> section is used to configure the router's local area network (LAN) and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can automatically configure the TCP/IP settings for any device that requests such a service. If you connect a device that has been configured to obtain an IP address automatically, the DHCP server will lease out an IP address from the available IP pool and the device will be able to communicate within the router's private network.

The <b>LAN</b> section is used to configure the router's local area network (LAN)  

and DHCP server settings. A DHCP (Dynamic Host Configuration Protocol) server can  

automatically configure the TCP/IP settings for any device that requests such a  

service. If you connect a device that has been configured to obtain an IP address  

automatically, the DHCP server will lease out an IP address from the available IP  

pool and the device will be able to communicate within the router's private network.

[[File:{{{file_lan}}}]]

[[File:Networking_rut9xx_manual_setup_wizard_lan_v1.png]]

<table class="nd-mantable">

<table class="nd-mantable">

         <td>Start</td>

         <td>Start</td>

         <td>integer [1..255]; default: <b>100</b></td>

         <td>integer [1..255]; default: <b>100</b></td>

         <td>The starting IP address value. e.g., if your router’s LAN IP is 192.168.1.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.1.0..192.168.1.254] (192.168.1.255 is a special unavailable address). If the Start value is set to 100 then the DHCP server will only lease out addresses starting from 192.168.1.<b>100</b>.</td>

         <td>The starting IP address value. e.g., if your router’s LAN IP is 192.168.1.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.1.0..192.168.1.254] (192.168.1.255 is a special unavailable address). If the Start value is set to 100 then the DHCP server will only lease out addresses starting from 192.168.1.<b>100</b></td>

     </tr>

     </tr>

     <tr>

     <tr>

If you wish to set the router's LAN and DHCP settings later instead, you can do so via the <i>Network → [[{{{name}}} LAN|LAN]]</i> page.

If you wish to set the router's LAN and DHCP settings later instead, you can do so via the <i>Network → [[{{{name}}} LAN|LAN]]</i> page.

==WiFi==

==Wireless==

 

The <b>WiFi</b> section is used to configure the router's WiFi access point (AP). A WiFi access point is a type of wireless interface that provides WiFi access to connecting clients.

'''Important: If your device batch number is lower than 034, Key and Cipher default values may differ from shown examples below.'''

[[File:{{{file_wifi}}}]]

[[File:Networking_{{lc:{{{name}}}}}_manual_setup_wizard_wifi_v2.png]]

<table class="nd-mantable">

<table class="nd-mantable">

==RMS==

==RMS==

This section is used to configure the settings required to connect the router to the <b>RMS</b> (<b>Remote Management System</b>) - a cloud system designed by Teltonika and intended for remote monitoring and management of Teltonika's [[Network products|networking products]].

This section is used to configure the settings required to connect the router to the <b>RMS</b> (<b>Remote Management System</b>) - a cloud system designed by Teltonika and intended for remote monitoring and management of [[Main Page|Teltonika-Network products]].

In order to add a device(s) to RMS, get yourself acquainted by watching [https://www.youtube.com/watch?v=bZeqdrAcdVU this instructional video] and register an account by [https://rms.teltonika.lt/ clicking here]. <b>Each unique device receives a free month-long RMS license</b> when added to RMS for the first time.  

In order to add a device(s) to RMS, get yourself acquainted by watching [https://www.youtube.com/watch?v=bZeqdrAcdVU this instructional video] and register an account by [https://rms.teltonika.lt/ clicking here]. <b>Each unique device receives a free month-long RMS license</b> when added to RMS for the first time.  

[[File:{{{file_rms}}}]]

[[File:Networking_rutxxx_manual_setup_wizard_rms_v1.png]]

<table class="nd-mantable">

<table class="nd-mantable">

If you wish to set the router's RMS settings later instead, you can do so via the <i>System → Administration → [[{{{name}}}_Administration#RMS|RMS]]</i> page.

If you wish to set the router's RMS settings later instead, you can do so via the <i>System → Administration → [[{{{name}}}_Administration#RMS|RMS]]</i> page.

[[Category:{{{name}}} WebUI]]

{{#ifeq:{{{legacy}}}|1||[[Category:{{{name}}} System section]]}}