31,703
edits
Changes
Template:Networking rut manual upnp (view source)
Revision as of 09:07, 17 November 2020
, 09:07, 17 November 2020Dziugas moved page Template:Networking rut2xx upnp to Template:Networking rut manual upnp without leaving a redirect
{{Template: Networking_rutxxx_manual_fw_disclosure
{{Template: Networking_rutxxx_manual_fw_disclosure
| fw_version = {{#switch: {{{series}}}
| fw_version = {{#switch: {{{series}}}
| RUT2XX = {{{series}}}_R_00.01.12
| RUT2XX = {{{series}}}_R_00.01.13
| RUT9XX = {{{series}}}_R_00.06.07}}
| RUT9XX = {{{series}}}_R_00.06.07}}
}}
}}
==Summary==
==Summary==
{{Template:Networking_rut9xx_rut2xx_rutxxx_manual_package_disclosure
<b>UPnP</b> (<b>Universal Plug and Play</b>) is a service that allows clients in the local network to automatically configure some devices and services.
| device_name = {{{name}}}
| series = {{{series}}}
This chapter of the user manual provides an overview of the UPnP page in {{{name}}} devices.
| package_name = UPnP
{{Template: Networking_rutos_manual_package_disclosure
| name = {{{name}}}
| series = {{{series}}}
| package = UPnP
}}
}}
==Active UPnP Redirects==
==Active UPnP Redirects==
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<th>Field name</th>
<th>Field</th>
<th>Value</th>
<th>Value</th>
<th>Description</th>
<th>Description</th>
<tr>
<tr>
<td>Enabled</td>
<td>Enabled</td>
<td>yes | no; Default: '''no'''</td>
<td>yes | no; default: <b>no</b></td>
<td>Toggles UPnP on or off.</td>
<td>Toggles UPnP on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable secure mode</td>
<td>Enable secure mode</td>
<td>yes | no; Default: '''yes'''</td>
<td>yes | no; default: <b>yes</b></td>
<td>Toggles secure mode on or off.</td>
<td>Toggles secure mode on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Enable additional logging</td>
<td>Enable additional logging</td>
<td>yes | no; Default: '''no'''</td>
<td>yes | no; default: <b>no</b></td>
<td>Puts extra debugging information into the system log.</td>
<td>Puts extra debugging information into the system log.</td>
</tr>
</tr>
<tr>
<tr>
<td>Downlink</td>
<td>Downlink</td>
<td>integer; Default: '''1024'''</td>
<td>integer; default: <b>1024</b></td>
<td>Bandwidth available for traffic coming in from the external interface in kbit/s. Note that this only information given to clients, it doesn't control the speed. In order to control the speed, you can try configuring [[{{{name}}}_QoS#QoS|QoS]].</td>
<td>Bandwidth available for traffic coming in from the external interface in kbit/s. Note that this only information given to clients, it doesn't control the speed. In order to control the speed, you can try configuring [[{{{name}}}_QoS#QoS|QoS]].</td>
</tr>
</tr>
<tr>
<tr>
<td>Uplink</td>
<td>Uplink</td>
<td>integer; Default: '''512'''</td>
<td>integer; default: <b>512</b></td>
<td>Bandwidth available for traffic out the external interface in kbit/s. Note that this only information given to clients, it doesn't control the speed. In order to control the speed, you can try configuring [[{{{name}}}_QoS#QoS|QoS]].</td>
<td>Bandwidth available for traffic out the external interface in kbit/s. Note that this only information given to clients, it doesn't control the speed. In order to control the speed, you can try configuring [[{{{name}}}_QoS#QoS|QoS]].</td>
</tr>
</tr>
<tr>
<tr>
<td>Port</td>
<td>Port</td>
<td>integer [1..65535]; Default: '''5000'''</td>
<td>integer [1..65535]; default: <b>5000</b></td>
<td>Port to listen for requests.</td>
<td>Port to listen for requests.</td>
</tr>
</tr>
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<th>Field name</th>
<th>Field</th>
<th>Value</th>
<th>Value</th>
<th>Description</th>
<th>Description</th>
<tr>
<tr>
<td>Report system instead of daemon uptime</td>
<td>Report system instead of daemon uptime</td>
<td>yes | no; Default: '''yes'''</td>
<td>yes | no; default: <b>yes</b></td>
<td>Use system uptime as UPnP uptime.</td>
<td>Use system uptime as UPnP uptime.</td>
</tr>
</tr>
<tr>
<tr>
<td>Device UUID</td>
<td>Device UUID</td>
<td>string; Default: '''unique'''</td>
<td>string; default: <b>unique</b></td>
<td>The Device UUID attribute specifies and uniquely identifies a device that supports Universal Plug and Play (UPnP).</td>
<td>The Device UUID attribute specifies and uniquely identifies a device that supports Universal Plug and Play (UPnP).</td>
</tr>
</tr>
<tr>
<tr>
<td>UPnP lease file</td>
<td>UPnP lease file</td>
<td>string; Default: '''/var/upnp.leases'''</td>
<td>string; default: <b>/var/upnp.leases</b></td>
<td>Stores active UPnP redirects in a lease file (specified), like DHCP leases.</td>
<td>Stores active UPnP redirects in a lease file (specified), like DHCP leases.</td>
</tr>
</tr>
<tr>
<tr>
<td>Comment</td>
<td>Comment</td>
<td>string; Default: <b>none</b></td>
<td>string; default: <b>none</b></td>
<td>Adds a comment to this rule.</td>
<td>Adds a comment to this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td>External ports</td>
<td>External ports</td>
<td>integer [0..65535]] | range of integers [0-65535]; Default: <b>none</b></td>
<td>integer [0..65535] | range of integers [0-65535]; default: <b>none</b></td>
<td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers.</td>
<td>External port(s) which may be redirected. May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers.</td>
</tr>
</tr>
<tr>
<tr>
<td>Internal Addresses</td>
<td>Internal Addresses</td>
<td>ip/integer [0..32]; Default: <b>none</b></td>
<td>ip/integer [0..32]; default: <b>none</b></td>
<td>Internal address to redirect to.</td>
<td>Internal address to redirect to.</td>
</tr>
</tr>
<tr>
<tr>
<td>Internal ports</td>
<td>Internal ports</td>
<td>integer [0..65535]] | range of integers [0-655355]; Default: <b>none</b></td>
<td>integer [0..65535] | range of integers [0-655355]; default: <b>none</b></td>
<td>Internal port(s) to redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers.</td>
<td>Internal port(s) to redirect to May be specified as a single port or a range of ports. To specify a range use a dash ('-') symbol between two integer numbers.</td>
</tr>
</tr>
<tr>
<tr>
<td>Action</td>
<td>Action</td>
<td>allow | deny; Default: '''allow'''</td>
<td>allow | deny; default: <b>allow</b></td>
<td>Allows or forbids the UPnP service to open the specified port.</td>
<td>Allows or forbids the UPnP service to open the specified port.</td>
</tr>
</tr>
