Difference between revisions of "Template:Networking rut manual vrrp"
From Teltonika Networks Wiki
(Created page with "__TOC__ ==Summary== The '''Virtual Router Redundancy Protocol''' ('''VRRP''') is a computer networking protocol that provides for automatic assignment of available Internet P...") |
|||
| Line 34: | Line 34: | ||
<td>Priority</td> | <td>Priority</td> | ||
<td>integer [1..255]; default: <b>100</b></td> | <td>integer [1..255]; default: <b>100</b></td> | ||
| − | <td> | + | <td>VRRP priority of the virtual router. Higher values equal higher priority. The router with the highest priority is considered to be the <i>Master router</i> while other routers are <i>Backup routers</i>. |
| − | <ul> | + | <ul>sends periodic VRRP Advertisement messages |
| − | <li><b>Master router</b> - </li> | + | <li><b>Master router</b> - the first hop router in the VRRP cluster (i.e., the router that provides connectivity to LAN devices by default).</li> |
| − | <li><b>Backup router</b> - </li> | + | <li><b>Backup router</b> - assumes the role of Master router in case it becomes unavailable. If there multiple Backup routers in the VRRP cluster, the one with the highest priority will assume the role of Master.</li> |
</ul> | </ul> | ||
</td> | </td> | ||
Revision as of 12:15, 16 July 2019
Summary
The Virtual Router Redundancy Protocol (VRRP) is a computer networking protocol that provides for automatic assignment of available Internet Protocol (IP) routers to participating hosts. This increases the availability and reliability of routing paths via automatic default gateway selections on an IP sub-network. This chapter is an overview of the VRRP function in RUT routers.
VRRP configuration
The VRRP LAN configuration settings section
[[File:{{{file_config}}}]]
| Field | Value | Description |
|---|---|---|
| Enable | yes | no; default: no | Turns VRRP on or off. |
| IP address | ip; default: 192.168.1.253 | Virtual IP address for the router LAN's VRRP cluster. |
| Virtual ID | integer [1..255]; default: 1 | The Virtual Router Identifier (VRID) is a field in the VRRP packet IP header used to identify the virtual router in the VRRP cluster. Routers with identical IDs will be grouped in the same VRRP cluster. |
| Priority | integer [1..255]; default: 100 | VRRP priority of the virtual router. Higher values equal higher priority. The router with the highest priority is considered to be the Master router while other routers are Backup routers.
|
Check Internet connection
The Check Internet connection section
[[File:{{{file_connection}}}]]
| field name | value | description |
|---|---|---|
| Enable | yes | no; Default: no | Toggles internet connection checking ON or OFF |
| Ping IP address | ip; Default: " " | A host to send ICMP packets to |
| Ping interval | integer; Default: 10 | Time interval between two Pings (in seconds |
| Ping timeout (sec) | integer [1..9999]; Default: 1 | Response timeout value |
| Ping packet size | integer [0..1000]; Default: " " | ICMP packet's size |
| Ping retry count | integer [1..9999]; Default: " " | Failed Ping attempt count before determining that the connection is lost |
See also
[[Category:{{{name}}} WebUI]]
