2,479
edits
Changes
Template:Networking rutos Thingsboard.io (view source)
Revision as of 14:16, 7 January 2021
, 14:16, 7 January 2021no edit summary
==Introduction==
==Introduction==
This article contains instructions on how to configure Thingsboard.io platform and connect a Teltonika-Networks devices.
This article contains instructions on how to configure Thingsboard IoT platform and connect a Teltonika-Networks devices.
==Connect device==
==Configuring Thingsboard IoT platform==
<li>2. Configure your device's <b>Access token</b>(Optional)</li>
<li>2. Configure your device's <b>Access token</b>(Optional)</li>
[[File:Thingboards_io_add_new_device.png]]
[[File:Thingboards_io_add_new_device.png]]
==== Credentials type:HTTP (Access token) ====
----
<li>1. Enable <b>Add credentials</b> option.</li>
<li>1. Enable <b>Add credentials</b> option.</li>
<li>2. Set desirable <b>Access token</b>. Note: In this section, you can also configure MQTT credentials, just by choosing different <b>Credentials type</b> value. </li>
<li>2. Set desirable <b>Access token</b>.
<li>3. Click <b>Add</b> button to save changes. </li>
<li>3. Click <b>Add</b> button to save changes. </li>
[[File:Thingboards_io_configuring_credentials.png]]
[[File:Thingboards_io_configuring_credentials.png]]
==Configuring data source==
=== Credentials type:MQTT Basic ===
----
<li>1. Enable <b>Add credentials</b> option.</li>
<li>2. Choose Credentials type:<b>MQTT Basic</b>.</li>
<li>3. Set username which will be used in MQTT authorization.</li>
<li>4. Set password which will be used in MQTT authorization.</li>
<li>5. Click <b>Add</b> button to save changes. </li>
[[File:Thingboards_io_configuring_credentials_mqtt_basic.png]]
==Preparing data source==
[[File:Thingboards_io_Modbus_TCP_master_device.png]]
[[File:Thingboards_io_Modbus_TCP_master_device.png]]
==Configuring data to server==
==Configuring data to server with HTTP protocol==
After configuring the data source, you can add a data sender configuration. Data sender functionality is located <b>Services → Data to server</b>. You can add data sender by clicking <b>Add</b> button.
After configuring the data source, you can add a data sender configuration. Data sender functionality is located <b>Services → Data to server</b>. You can add data sender by clicking <b>Add</b> button.
[[File:Thingboards_io_Thingboards_io_Data_to_server_HTTP.png]]
[[File:Thingboards_io_Thingboards_io_Data_to_server_HTTP.png]]
[[File:Thingboards_io_data_sender_configuration.png]]
<li>1. Set name for the <b>Data sender</b>.</li>
<li>1. Set name for the <b>Data sender</b>.</li>
<li>2. Set desirable name for your data variable. Make sure that your chosen parameter is shown below JSON format field.</li>
<li>2. Set desirable name for your data variable. Make sure that your chosen parameter is shown below JSON format field.</li>
<li>4. Add value to Custom header. </li>
<li>4. Add value to Custom header. </li>
<pre>Content-Type:application/json</pre>
<pre>Content-Type:application/json</pre>
==Configuring data to server with MQTT protocol==
After configuring the data source, you can add a data sender configuration. Data sender functionality is located <b>Services → Data to server</b>. You can add data sender by clicking <b>Add</b> button.
[[File:Thingboards_io_Thingboards_io_Data_to_server_mqtt.png]]
[[File:Thingboards_io_data_sender_configuration_mqtt.png]]
<li>1. Set name for the <b>Data sender</b>.</li>
<li>2. Choose <b>MQTT</b> protocol.</li>
<li>3. Set desirable name for your data variable. Make sure that your chosen parameter is shown below JSON format field.</li>
<li>4. Enter <b>thingsboard.cloud</b> as a host.</li>
<li>5. Paste in MQTT topic. </li>
<pre>v1/devices/me/telemetry</pre>
<li>6. Enable <b>Use credentials</b> option. Enter configured username and password from Thingsboard IoT platform.</li>
==Adding widget to the dashboard==
==Adding widget to the dashboard==
