Changes

If you've followed all the steps presented above, your configuration should be finished. But as with any other configuration, it is always wise to test the setup in order to make sure that it works properly. In order to test the '''ZeroTier''' Tunnel connection.

If you've followed all the steps presented above, your configuration should be finished. But as with any other configuration, it is always wise to test the setup in order to make sure that it works properly. In order to test the '''ZeroTier''' Tunnel connection.

 

<ol>

<ol>

   <li>login to RUTX WebUI and go to '''Services → CLI'''.</li>

   <li>login to RUTX WebUI and go to '''Services → CLI'''.</li>

   <li>Login with user name: '''root''' and the router's admin password.</li>

   <li>Login with user name: '''root''' and the router's admin password.</li>

   <li>From there you should then be able to '''ping''' the opposite instance's virtual IP address.</li>

   <li>From there you should then be able to '''ping''' the opposite instance's virtual IP address.</li>

   <li>To use a ping command, type '''ping <ip_address>''' and press the "Enter" key on your keyboard:</li>

   <li>To use a ping command, type '''ping <ip_address>''' and press the "Enter" key on your keyboard:</li>

</ol>

</ol>

 

[[File:Networking rutos configuration example Setting up a ZeroTier tunnel between RUTX device ping test v2.png|border|class=tlt-border]]

[[File:Networking rutos configuration example Setting up a ZeroTier tunnel between RUTX device ping test v2.png|border|class=tlt-border]]

----

----

Also it's possible to get information about the VPN tunnel configuration and status via '''CLI'''. If you would like to use the '''zerotier-cli''' commands, you need to login to the WebUI:

Also it's possible to get information about the VPN tunnel configuration and status via '''CLI'''. If you would like to use the '''zerotier-cli''' commands, you need to login to the WebUI:

<ol>

<ol>

   <li>Go to '''Services → CLI'''.</li>

   <li>Go to '''Services → CLI'''.</li>

   <li>Login with user name: '''root''' and the router's admin password.</li>

   <li>Login with user name: '''root''' and the router's admin password.</li>

   <li>Write '''zerotier-cli help''' command and press the "Enter" key on your keyboard:</li>

   <li>Write '''zerotier-cli help''' command and press the "Enter" key on your keyboard:</li>

<ol>

<ol>

The RUTX will show the commands the '''zerotier-cli''' can issue, for this example we'll get the VPN info/status and IP address.<br><br>

The RUTX will show the commands the '''zerotier-cli''' can issue, for this example we'll get the VPN info/status and IP address.<br><br>