Changes

Template:Networking rutos configuration example guest wifi (view source)

Revision as of 12:50, 22 July 2020

5,743 bytes added ,  12:50, 22 July 2020
→‎Results
Line 4: Line 4:  
Most of us are aware, that network security is extremely important. If your WiFi network is not properly secured, it makes you and all of your home or office resources vulnerable to a variety of security threats. To stay ahead of the curve, many companies and home users have guest WiFi. Unlike your regular WiFi network that you or your company members use, the guest WiFi network restricts what your guests can do in your network. It gives visitors access to the Internet connection, but nothing else making you or your company a lot more secure. This chapter is a guide on configuring a guest WiFi.
 
Most of us are aware, that network security is extremely important. If your WiFi network is not properly secured, it makes you and all of your home or office resources vulnerable to a variety of security threats. To stay ahead of the curve, many companies and home users have guest WiFi. Unlike your regular WiFi network that you or your company members use, the guest WiFi network restricts what your guests can do in your network. It gives visitors access to the Internet connection, but nothing else making you or your company a lot more secure. This chapter is a guide on configuring a guest WiFi.
   −
----
+
==Configuring router (RUTX)==
−
If you're having trouble finding some of the parameters described here on your device's WebUI, you should <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.
+
Before you start configuring the router <b>turn on "Advanced WebUI" mode</b>. You can do that by clicking the "Basic" button under "Mode", which is located at the top-right corner of the WebUI.  
   −
[[File:Networking rutx manual webui basic advanced mode v1.gif|border|class=tlt-border]]
+
[[File:Networking_rutx_manual_webui_basic_advanced_mode_v1.gif|border|class=tlt-border]]
   −
==Configuring home router (RUTX)==
+
 
−
===New LAN===
+
===New WiFi AP===
 +
----
    
<table class="nd-othertables_2">
 
<table class="nd-othertables_2">
 
     <tr>
 
     <tr>
 
         <th width=395; style="border-bottom: 1px solid white;></th>
 
         <th width=395; style="border-bottom: 1px solid white;></th>
−
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutx configuration examples guest wifi 2 v1.png|border|class=tlt-border]]</th>
+
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutos configuration examples guest wifi 3 v1.png|border|class=tlt-border]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td style="border-bottom: 1px solid white>
 
         <td style="border-bottom: 1px solid white>
−
Login to the router's WebUI, switch to '''ADVANCED''' mode and navigate to the '''Network → Interfaces''' page and do the following:
+
Login to the router's WebUI, navigate to the '''Network → Wireless''' page. Click '''Add'''. You can use either, 2.4GHz or 5GHz WiFi. Then you will be forwarded to the configuration window.
 
<ol>
 
<ol>
−
     <li>Enter a custom '''name'''.</li>
+
     <li></li>
−
     <li>Click the '''Add''' button.</li>
+
     <li></li>
 +
    <li></li>
 +
    <li></li>
 +
</ol>
 +
        </td>
 +
    </tr>
 +
</table>
    +
----
 +
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=395; style="border-bottom: 1px solid white;></th>
 +
        <th width=700; style="border-bottom: 1px solid white;" rowspan=2>
 +
[[File:Networking rutos configuration examples guest wifi 4 v2.png|border|class=tlt-border]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white;>
 +
On '''General Setup''' tab do the following:
 +
<ol>
 +
    <li>'''Enable''' instance.</li>
 +
    <li>Select mode '''Access Point'''.</li>
 +
    <li>Enter a custom '''ESSID'''.</li>
 +
    <li>Expand the drop-down menu '''Network'''.</li>
 +
    <li>Uncheck the '''lan''' interface.</li>
 +
    <li>Create a new interface, enter a custom name '''Guest'''.</li>
 
</ol>
 
</ol>
 
         </td>
 
         </td>
Line 34: Line 59:  
     <tr>
 
     <tr>
 
         <th width=395; style="border-bottom: 1px solid white;></th>
 
         <th width=395; style="border-bottom: 1px solid white;></th>
−
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutx configuration examples guest wifi 2 v1.png|border|class=tlt-border]]</th>
+
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>  
 +
[[File:Networking rutos configuration examples guest wifi 5 v1.png|border|class=tlt-border]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white;>
 +
Switch to '''Wireless Security''' tab and do the following:
 +
<ol>
 +
    <li>Select '''Encryption''' type.</li>
 +
    <li>Select '''Cipher''' type.</li>
 +
    <li>Enter '''Key'''.</li>
 +
    <li>'''Save&Apply''' changes.</li>
 +
</ol>
 +
        </td>
 +
    </tr>
 +
</table>
 +
 
 +
----
 +
 
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=395; style="border-bottom: 1px solid white;></th>
 +
        <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutos configuration examples guest wifi 6 v1.png|border|class=tlt-border]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td style="border-bottom: 1px solid white>
 
         <td style="border-bottom: 1px solid white>
 +
Wait for configuration to apply. Two Wireless Access Points should be enabled
 +
<ol>
 +
    <li></li>
 +
    <li></li>
 +
    <li></li>
 +
    <li></li>
 +
</ol>
 +
        </td>
 +
    </tr>
 +
</table>
    +
===New LAN interface===
 +
----
 +
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=395; style="border-bottom: 1px solid white;></th>
 +
        <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutos configuration example openvpn bridge use case 12 v1.png|border|class=tlt-border]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white>
 +
Now go to '''Network → Interfaces''' and press '''Edit''' next to your newly created LAN interface:
 
<ol>
 
<ol>
 +
    <li></li>
   −
     <li>Select protocol '''Static address'''.</li>
+
</ol>
 +
        </td>
 +
    </tr>
 +
</table>
 +
 
 +
----
 +
 
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=395; style="border-bottom: 1px solid white;></th>
 +
        <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutos configuration examples guest wifi 2 v1.png|border|class=tlt-border]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white>
 +
In the '''General setup''' section, do the following:
 +
<ol>
 +
     <li>Select '''Protocol''' - Static. Confirm by clicking "SWITCH PROTOCOL".</li>
 
     <li>Enter a '''IPv4 address'''.</li>
 
     <li>Enter a '''IPv4 address'''.</li>
 
     <li>Enter a '''IPv4 netmask'''.</li>
 
     <li>Enter a '''IPv4 netmask'''.</li>
−
     <li>'''Enable''' DHCP server.</li>
+
     <li>Enable '''DHCP server'''.</li>
−
     <li>Don't forget to '''Save&Apply''' the changes.</li>
+
     <li>Press '''Save&Apply'''.</li>
 
</ol>
 
</ol>
 
         </td>
 
         </td>
Line 51: Line 135:  
</table>
 
</table>
   −
===New Wireless===
+
===Firewall rules===
 +
----
    
<table class="nd-othertables_2">
 
<table class="nd-othertables_2">
Line 57: Line 142:  
         <th width=395; style="border-bottom: 1px solid white;></th>
 
         <th width=395; style="border-bottom: 1px solid white;></th>
 
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>  
 
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>  
−
[[File:Networking rutx configuration examples guest wifi 4 v1.png|border|class=tlt-border]]</th>
+
[[File:Networking rutos configuration example openvpn bridge use case 15 v1.png|border|class=tlt-border]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td style="border-bottom: 1px solid white;>
 
         <td style="border-bottom: 1px solid white;>
−
Navigate to the '''Network → Wireless''' page and do the following:
+
Navigate to '''Network → Firewall → General Settings'''. There create a new '''Zone''' rule by pressing '''Add''' button. Then you will be forwarded to the configuration window.
 
<ol>
 
<ol>
−
     <li>Click '''Add'''.</li>
+
     <li></li>
−
    <li>'''Enable''' instance.</li>
  −
    <li>Select mode '''Access Point'''.</li>
  −
    <li>Enter '''ESSID'''.</li>
  −
    <li>Assign it to new '''Guest''' LAN network.</li>
  −
    <li>Enter '''Wireless security''' key and '''Save&Apply''' changes.</li>
   
</ol>
 
</ol>
 
         </td>
 
         </td>
Line 79: Line 159:  
     <tr>
 
     <tr>
 
         <th width=395; style="border-bottom: 1px solid white;></th>
 
         <th width=395; style="border-bottom: 1px solid white;></th>
−
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutx configuration examples guest wifi 5 v1.png|border|class=tlt-border]]</th>
+
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>  
 +
[[File:Networking rutos configuration examples guest wifi 8 v1.png|border|class=tlt-border]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td style="border-bottom: 1px solid white>
+
         <td style="border-bottom: 1px solid white;>
−
Wait for configuration to apply. Two Wireless Access Points should be enabled
+
In the '''ZONE''' page, do the following:
 
<ol>
 
<ol>
 +
    <li>Enter a custom '''Name'''.</li>
 +
    <li>Add new created ''"Guest"'' LAN to '''Covered networks'''.</li>
 +
    <li>Select WAN interfaces for '''Allow forward to destination zones'''.</li>
 +
    <li>Select WAN interfaces for '''Allow forward from destination zones'''.</li>
 +
    <li>'''Save&Apply''' changes.</li>
 
     <li></li>
 
     <li></li>
−
    <li></li>
  −
    <li></li>
  −
    <li></li>
   
</ol>
 
</ol>
 
         </td>
 
         </td>
Line 94: Line 177:  
</table>
 
</table>
   −
===Edit Firewall zone===
+
----
 +
 
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=395; style="border-bottom: 1px solid white;></th>
 +
        <th width=700; style="border-bottom: 1px solid white;" rowspan=2>
 +
[[File:Networking rutos configuration examples guest wifi 9 v1.png|border|class=tlt-border]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white;>
 +
In order to disable WebUI or SSH access to RUTX from Guest's_WiFi network navigate to the '''Network → Firewall → Traffic Rules''' page and do the following:
 +
<ol>
 +
    <li>Enter a custom '''Name'''.</li>
 +
    <li>Select ''"guest_zone"'' for '''Source zone'''.</li>
 +
    <li>Select ''"lan"'' for '''Destination zone'''.</li>
 +
    <li>Click the '''Add''' button. Then you will be forwarded to the configuration window.</li>
 +
</ol>
 +
        </td>
 +
    </tr>
 +
</table>
 +
 
 +
----
    
<table class="nd-othertables_2">
 
<table class="nd-othertables_2">
Line 100: Line 204:  
         <th width=395; style="border-bottom: 1px solid white;></th>
 
         <th width=395; style="border-bottom: 1px solid white;></th>
 
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>  
 
         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>  
−
[[File:Networking rutx configuration examples guest wifi 6 v1.png|border|class=tlt-border]]</th>
+
[[File:Networking rutos configuration examples guest wifi 10 v1.png|border|class=tlt-border]]</th>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td style="border-bottom: 1px solid white;>
 
         <td style="border-bottom: 1px solid white;>
−
Navigate to the '''Network → Firewall → General Settings''' page and do the following
+
Do the following in the '''TRAFFIC RULES''' page:
 
<ol>
 
<ol>
−
     <li>Click the '''Add''' button.</li>
+
     <li>'''Enable''' instance.</li>
−
     <li>Enter a custom '''name'''.</li>
+
     <li>Change the '''Destination zone''' to ''"Device (input)"''.</li>
−
    <li>Add new created Guest LAN to '''Covered networks'''.</li>
+
     <li>Enter the '''Destination port''' to reject. By default ports 22, 80, 443 are used to access the web user interface and SSH.</li>
−
     <li>Select '''WAN''' interfaces for '''Allow forward to destination zones'''.</li>
+
     <li>Change the '''Action''' to ''"Reject"''.</li>
−
     <li>Select '''WAN''' interfaces for '''Allow forward from destination zones'''.</li>
   
     <li>'''Save&Apply''' changes.</li>
 
     <li>'''Save&Apply''' changes.</li>
 
     <li></li>
 
     <li></li>
Line 119: Line 222:     
==Results==
 
==Results==
 +
If you've followed all the steps presented above, your configuration should be finished. If you are near a RUT, that is, in a wireless zone, turn on WiFi on your device and view the available networks. You should see the available SSID - "RUTX_WiFi_2G" and "Guest_WiFi". Select one of them and enter the appropriate WiFi password.
 +
 +
-----
 +
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=525; style="border-bottom: 1px solid white;"></th>
 +
        <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
 +
[[File:Networking rutos configuration examples guest wifi 14 v1.jpg|border|class=tlt-border|300px|center]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white>
 
Wireless users connected to SSID: “'''RUTX_WIFI'''”, will be assign to “LAN”, and will get IP from main pool '''192.168.1.0/24'''.
 
Wireless users connected to SSID: “'''RUTX_WIFI'''”, will be assign to “LAN”, and will get IP from main pool '''192.168.1.0/24'''.
 +
        </td>
 +
    </tr>
 +
</table>
 +
 +
----
 +
 +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=525; style="border-bottom: 1px solid white;"></th>
 +
        <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
 +
[[File:Networking rutos configuration examples guest wifi 13 v1.jpg|border|class=tlt-border|300px|center]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white>
 +
LAN users are able to access any data from pool 192.168.1.0/24. For example they can access Web UI.
 +
        <ol>
 +
            <li></li>
 +
            <li></li>
 +
            <li></li>
 +
            <li></li>
 +
        </ol>
 +
        </td>
 +
    </tr>
 +
</table>
 +
 +
----
    +
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=525; style="border-bottom: 1px solid white;"></th>
 +
        <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
 +
[[File:Networking rutos configuration examples guest wifi 12 v2.jpg|border|class=tlt-border|300px|center]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white>
 
Wireless users connected to SSID: “'''GUEST'S_WIFI'''”, will be assign to LAN “Guest”, and will get IP from new pool '''10.10.10.0/24'''.
 
Wireless users connected to SSID: “'''GUEST'S_WIFI'''”, will be assign to LAN “Guest”, and will get IP from new pool '''10.10.10.0/24'''.
 +
        <ol>
 +
            <li></li>
 +
            <li></li>
 +
            <li></li>
 +
        </ol>
 +
        </td>
 +
    </tr>
 +
</table>
 +
 +
----
   −
Guest hosts are unable to access any data from pool 192.168.1.0/24.
+
<table class="nd-othertables_2">
 +
    <tr>
 +
        <th width=525; style="border-bottom: 1px solid white;"></th>
 +
        <th width=620; style="border-bottom: 1px solid white;" rowspan=2>
 +
[[File:Networking rutos configuration examples guest wifi 11 v1.jpg|border|class=tlt-border|300px|center]]</th>
 +
    </tr>
 +
    <tr>
 +
        <td style="border-bottom: 1px solid white>
 +
Guest hosts are unable to access any data from pool 192.168.1.0/24. And access to RUTX Web UI or SSH is restricted.
 +
        <ol>
 +
            <li></li>
 +
            <li></li>
 +
            <li></li>
 +
        </ol>
 +
        </td>
 +
    </tr>
 +
</table>
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/65970...67307"

Navigation menu