Changes

If you've followed all the steps presented above, your configuration should be finished. If you are near a RUT, that is, in a wireless zone, turn on WiFi on your device and view the available networks. You should see the available SSID - "RUTX_WiFi_2G" and "Guest_WiFi". Select one of them and enter the appropriate WiFi password.

If you've followed all the steps presented above, your configuration should be finished. If you are near a RUT, that is, in a wireless zone, turn on WiFi on your device and view the available networks. You should see the available SSID - "RUTX_WiFi_2G" and "Guest_WiFi". Select one of them and enter the appropriate WiFi password.

Wireless users connected to SSID: “'''RUTX_WIFI'''”, will be assign to “LAN”, and will get IP from main pool '''192.168.1.0/24'''.

Wireless users connected to SSID: “'''RUTX_WIFI'''”, will be assign to “LAN”, and will get IP from main pool '''192.168.1.0/24'''.

Guest hosts are unable to access any data from pool 192.168.1.0/24.

LAN users are able to access any data from pool 192.168.1.0/24. For example they can access Web UI.

-----

----

<table class="nd-othertables_2">

<table class="nd-othertables_2">

     <tr>

     <tr>

         <th width=300; style="border-bottom: 1px solid white;></th>

         <th width=525; style="border-bottom: 1px solid white;"></th>

         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutos configuration examples guest wifi 14 v1.jpg|border|class=tlt-border|728px|right]]</th>

         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>

    </tr>

[[File:Networking rutos configuration examples guest wifi 12 v2.jpg|border|class=tlt-border|300px|center]]</th>

        <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking rutos configuration examples guest wifi 13 v1.jpg|border|class=tlt-border|728px|right]]</th>

     </tr>

     </tr>

     <tr>

     <tr>

         <td style="border-bottom: 1px solid white>

         <td style="border-bottom: 1px solid white>

Remote office should now be able to access HQ network resources. To verify the connection you can ping remote RUTX (HQ server) LAN IP and if you get a reply, you have successfully connected to HQ‘s internal network. Also, all LAN addresses, that belong to the work network (192.168.1.0/24), should now be leased to LAN devices by HQ router.

Wireless users connected to SSID: “'''GUEST'S_WIFI'''”, will be assign to LAN “Guest”, and will get IP from new pool '''10.10.10.0/24'''.

         </td>

         </td>

     </tr>

     </tr>

----

----

<table class="nd-othertables_2">

<table class="nd-othertables_2">

     <tr>

     <tr>

         <th width=300; style="border-bottom: 1px solid white;></th>

         <th width=525; style="border-bottom: 1px solid white;"></th>

         <th width=700; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rutos_configuration_example_openvpn_bridge_use_case_19_v2.png|border|class=tlt-border|728px|right]]</th>

         <th width=620; style="border-bottom: 1px solid white;" rowspan=2>

[[File:Networking rutos configuration examples guest wifi 11 v1.jpg|border|class=tlt-border|300px|center]]</th>

     </tr>

     </tr>

     <tr>

     <tr>

         <td style="border-bottom: 1px solid white>

         <td style="border-bottom: 1px solid white>

In order to check the guest WiFi, you simply need to connect to the newly created WiFi AP, then check whether you have internet connectivity and try to ping OpenVPN server LAN IP - if everything is set up correctly, you should not be able to do that.  

Guest hosts are unable to access any data from pool 192.168.1.0/24. And access to RUTX Web UI or SSH is restricted.

         </td>

         </td>

     </tr>

     </tr>

</table>

</table>