0
edits
Changes
Template:Networking rutos configuration example openvpn bridge wifi ap use case (view source)
Revision as of 14:56, 10 July 2020
, 14:56, 10 July 2020→Configuring OpenVPN server
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Now go to '''Services → VPN → OpenVPN'''. There create a new configuration by selecting role '''Server''', writing '''New configuration name''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.
Now go to '''Services → VPN → OpenVPN'''. There create a new configuration by writing '''New configuration name''', selecting role '''Server''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.
</td>
</td>
</tr>
</tr>
<li>Select '''Authentication: Static key'''.</li>
<li>Select '''Authentication: Static key'''.</li>
<li>Add '''Keep alive''' interval: '''10 120'''.</li>
<li>Add '''Keep alive''' interval: '''10 120'''.</li>
<li>Upload '''Static pre-shared key''' (use the Static.key file you created in previous steps).</li>
<li>Upload '''Static pre-shared key'''.</li>
<li>'''Save''' the changes.</li>
<li>'''Save''' the changes.</li>
</ol>
</ol>
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Go to '''Network → LAN''' and press '''Edit''' next to your LAN interface:
Go to '''Network → Interfaces''' and press '''Edit''' next to your LAN interface:
</td>
</td>
</tr>
</tr>
<tr>
<tr>
<th width=355; style="border-bottom: 1px solid white;></th>
<th width=355; style="border-bottom: 1px solid white;></th>
<th width=790; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rutx_configuration_example_openvpn_bridge_use_case_6_v1.png|770px|right]]</th>
<th width=790; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rutx_configuration_example_openvpn_bridge_use_case_6_v2.png|border|class=tlt-border|728px|right]]</th>
</tr>
</tr>
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Go to '''Services → VPN → OpenVPN'''. There create a new configuration by selecting role '''Client''', writing '''New configuration name''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.
Go to '''Services → VPN → OpenVPN'''. There create a new configuration by writing '''New configuration name''', selecting role '''Client''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.
</td>
</td>
</tr>
</tr>
<tr>
<tr>
<th width=355; style="border-bottom: 1px solid white;></th>
<th width=355; style="border-bottom: 1px solid white;></th>
<th width=790; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rutx_configuration_example_openvpn_bridge_use_case_7_v2.png|770px|right]]</th>
<th width=790; style="border-bottom: 1px solid white;" rowspan=2>[[File:Networking_rutx_configuration_example_openvpn_bridge_use_case_7_v3.png|border|class=tlt-border|728px|right]]</th>
</tr>
</tr>
<tr>
<tr>
<li>Write '''Remote host/IP address''' (RUTX OpenVPN server public IP).</li>
<li>Write '''Remote host/IP address''' (RUTX OpenVPN server public IP).</li>
<li>Add '''Keep alive''' interval: '''10 120'''.</li>
<li>Add '''Keep alive''' interval: '''10 120'''.</li>
<li>Upload '''Static pre-shared key''' (use the .txt file you created in previous steps).</li>
<li>Upload '''Static pre-shared key'''.</li>
<li>'''Save''' the changes.</li>
<li>'''Save''' the changes.</li>
</ol>
</ol>
