0
edits
Changes
Template:Networking rutos configuration example openvpn bridge wifi ap use case (view source)
Revision as of 17:31, 21 July 2020
, 17:31, 21 July 2020→Configuration overview and prerequisites
<th width=325; style="border-bottom: 1px solid white;></th>
<th width=325; style="border-bottom: 1px solid white;></th>
<th width=820; style="border-bottom: 1px solid white;" rowspan=2;>
<th width=820; style="border-bottom: 1px solid white;" rowspan=2;>
[[File:Networking_rutx_configuration_example_openvpn_bridge_use_case_topology_v2.png|border|class=tlt-border|750px|right]]</th>
[[File:Networking_rutos_configuration_example_openvpn_bridge_use_case_topology_v1.png|border|class=tlt-border|750px|right]]</th>
</tr>
</tr>
<tr>
<tr>
'''Prerequisites''':
'''Prerequisites''':
* Two RUTX routers
* Two RUTX routers (only the versions, which have WiFi)
* A Public Static or Public Dynamic IP address
* A Public Static or Public Dynamic IP address
* An end device to configure the router (PC, Laptop, Tablet, Smartphone)
* An end device to configure the router (PC, Laptop, Tablet, Smartphone)
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Go to '''Services → VPN → OpenVPN'''. There create a new configuration by writing '''New configuration name''', selecting role '''Server''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.
Go to '''Services → VPN → OpenVPN'''. There create a new configuration by writing '''New configuration name''' (you can type anything you want), selecting role '''Server''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.
</td>
</td>
</tr>
</tr>
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Go to '''Services → VPN → OpenVPN'''. There create a new configuration by writing '''New configuration name''', selecting role '''Client''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.
Go to '''Services → VPN → OpenVPN'''. There create a new configuration by writing '''New configuration name''' (you can type anything you want), selecting role '''Client''' and pressing '''Add''' button. It should appear after a few seconds. Then press '''Edit'''.
</td>
</td>
</tr>
</tr>
<tr>
<tr>
<td style="border-bottom: 1px solid white>
<td style="border-bottom: 1px solid white>
Remote office should now be able to access HQ network resources. To verify the connection you can ping remote RUTX HQ server LAN IP and if you get a reply, you have successfully connected to HQ‘s internal network. Also, all LAN addresses, that belong to work network (192.168.1.0/24), should now be leased to LAN devices by HQ router.
Remote office should now be able to access HQ network resources. To verify the connection you can ping remote RUTX (HQ server) LAN IP and if you get a reply, you have successfully connected to HQ‘s internal network. Also, all LAN addresses, that belong to the work network (192.168.1.0/24), should now be leased to LAN devices by HQ router.
</td>
</td>
</tr>
</tr>