9,561
edits
Changes
Template:Networking rutos manual dnp3 (view source)
Revision as of 10:19, 24 May 2022
, 10:19, 24 May 2022no edit summary
The <b>TCP Master Configuration</b> section is used to configure the parameters of a DNP3 Outstation that the Master (this {{{name}}} device) will be querying with requests. The figure below is an example of the TCP Master Configuration and the table below provides information on the fields contained in that section:
The <b>TCP Master Configuration</b> section is used to configure the parameters of a DNP3 Outstation that the Master (this {{{name}}} device) will be querying with requests. The figure below is an example of the TCP Master Configuration and the table below provides information on the fields contained in that section:
[[File:Networking_rutos_manual_dnp3_tcp_master_tcp_master_configuration.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_dnp3_tcp_master_tcp_master_configuration_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>integer [1..60]; default: <b>none</b></td>
<td>integer [1..60]; default: <b>none</b></td>
<td>Maximum response wait time.</td>
<td>Maximum response wait time.</td>
</tr>
<tr>
<td>Save to flash</td>
<td>off | on; default: <b>off</b></td>
<td>When enabled, stores device in device flash.</td>
</tr>
</tr>
</table>
</table>
</tr>
</tr>
</table>
</table>
===Request Configuration Testing===
----
This section is used to check whether the configuration works correctly. Simply click the 'Test' button and a response should appear in the box below. The last value represents the configured request data. A successful response to a test may look something like this:
[[File:Networking_rutos_manual_dnp3_tcp_master_requests_configuration_testing.png|border|class=tlt-border]]
{{#ifeq:{{{serial}}} | 1 |
{{#ifeq:{{{serial}}} | 1 |
</tr>
</tr>
</table>
</table>
===Request Configuration Testing===
----
This section is used to check whether the configuration works correctly. Simply click the 'Test' button and a response should appear in the box below. The last value represents the configured request data. A successful response to a test may look something like this:
[[File:Networking_rutos_manual_dnp3_tcp_master_requests_configuration_testing.png|border|class=tlt-border]]
|}}
|}}
