2,479
edits
Changes
Template:Networking rutos manual failover (view source)
Revision as of 12:08, 11 May 2020
, 12:08, 11 May 2020no edit summary
===Load Balancing===
===Load Balancing===
----
----
Load balancing lets users create rules that divide traffic between different interfaces. Below is an example of Load Balancing settings window.[[File:Networking_rutx11_manual_load_balancing_v1.png|border|1145x1145px]]As you may notice from the image above, the configuration is very simple. You can assign ratio values to WAN interfaces. The ratio values represent a percentage of load that will go through an interface. For example, if you set that 3 parts of traffic would go through the Mobile interface and 2 parts would go through the Wired interface, it would mean that roughly 60% (3/5) of data will be transferred through Mobile, 40% (2/5) through Wired. If the ratios would be different, say Mobile: 5, Wired: 10, then 33% (5/15) of data would be transferred through Mobile, and 66% (10/15) would go through Wired.
Load balancing lets users create rules that divide traffic between different interfaces. Below is an example of Load Balancing settings window.
[[File:Networking_rutx11_manual_load_balancing_v1.png]]
As you may notice from the image above, the configuration is very simple. You can assign ratio values to WAN interfaces. The ratio values represent a percentage of load that will go through an interface. For example, if you set that 3 parts of traffic would go through the Mobile interface and 2 parts would go through the Wired interface, it would mean that roughly 60% (3/5) of data will be transferred through Mobile, 40% (2/5) through Wired. If the ratios would be different, say Mobile: 5, Wired: 10, then 33% (5/15) of data would be transferred through Mobile, and 66% (10/15) would go through Wired.
If you press Edit button, you will be transferred to the same interface settings that were described in [[#Failover|Failover section]].
If you press Edit button, you will be transferred to the same interface settings that were described in [[#Failover|Failover section]].
[[Category:{{{name}}} Network section]]
[[Category:{{{name}}} Network section]]
