360
edits
Changes
Template:Networking rutos manual gps (view source)
Revision as of 20:22, 8 March 2023
, 20:22, 8 March 2023Added new and changed a bit NMEA sentence information
The figure below is an example of the Map page:
The figure below is an example of the Map page:
[[File:Networking_rutos_manual_gps_map.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_gps_map_v2.png|border|class=tlt-border]]
==NMEA==
==NMEA==
<tr>
<tr>
<td><b>GPVTG</b></td>
<td><b>GPVTG</b></td>
<td>Track made good and speed relative to the ground.</td>
<td>GPS track made good and speed relative to the ground.</td>
</tr>
</tr>
<tr>
<tr>
<td><b>GAGSV</b></td>
<td><b>GAGSV</b></td>
<td>Number of Galileo satellites in view.</td>
<td>Number of Galileo satellites in view.</td>
</tr>
<tr>
<td><b>GARMC</b></td>
<td>Recomended minimum specific for Galileo data.</td>
</tr>
<tr>
<td><b>GAGGA</b></td>
<td>Galileo fix data.</td>
</tr>
<tr>
<td><b>GAGSA</b></td>
<td>Galileo DOP and active satellites.</td>
</tr>
<tr>
<td><b>GAVTG</b></td>
<td>Galileo track made good and speed information relative to the ground.</td>
</tr>
</tr>
<tr>
<tr>
<td><b>PQGSV</b></td>
<td><b>PQGSV</b></td>
<td>Detailed satellite data (used in BeiDou and QZSS (Quectel Quirk) sentences).</td>
</tr>
<tr>
<td><b>PQGSA</b></td>
<td>Overall satellite data (used in BeiDou and QZSS (Quectel Quirk) sentences).</td>
</tr>
<tr>
<td><b>GBGSV</b></td>
<td>Detailed satellite data (used in BeiDou sentences).</td>
<td>Detailed satellite data (used in BeiDou sentences).</td>
</tr>
</tr>
<tr>
<tr>
<td><b>PQGSA</b></td>
<td><b>GBGSA</b></td>
<td>Overall satellite data (used in BeiDou sentences).</td>
<td>BeiDou DOP and active satellites.</td>
</tr>
<tr>
<td><b>GQGSV</b></td>
<td>Detailed QZSS satellite data (QZSS regional GPS augmentation system (Japan)).</td>
</tr>
<tr>
<td><b>GQGSA</b></td>
<td>QZSS DOP and active satellites (QZSS regional GPS augmentation system (Japan)).</td>
</tr>
</tr>
</table>
</table>
<tr>
<tr>
<td><span style="color: #20C0D7;">URL</span></td>
<td><span style="color: #20C0D7;">URL</span></td>
<td>url string; default: <b>192.168.1.5</b></td>
<td>url string; default: <b>none</b></td>
<td>URL of remote server.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td>
<td>URL of remote server.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td>
</tr>
</tr>
<tr>
<tr>
<td><span style="color: #20C0D7;">Delay</span></td>
<td><span style="color: #20C0D7;">Delay</span></td>
<td>integer; default: <b>5</b></td>
<td>integer; default: <b>none</b></td>
<td>Time interval in seconds between sending packages.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td>
<td>Time interval in seconds between sending packages.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td>
</tr>
</tr>
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
{{#switch: {{{name}}}
{{#switch: {{{name}}}
| RUT955|RUT956=[[File:Networking_rut955_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
| RUT955|RUT956=[[File:Networking_rut955_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
| #default=[[File:Networking_rutos_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
| #default=[[File:Networking_rutos_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
}}
}}
The <b>AVL server settings</b> section is used to configure the main parameters of data sending to an AVL server. The figure below is an example of the AVL Server Settings section and the table below provides information on the fields contained in that section:
The <b>AVL server settings</b> section is used to configure the main parameters of data sending to an AVL server. The figure below is an example of the AVL Server Settings section and the table below provides information on the fields contained in that section:
[[File:Networking_rutos_manual_gps_avl_avl_server_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_gps_avl_avl_server_settings_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>off | on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>When turned on, handles each AVL packet iteration as a new connection. When turned off, connects once and uses the same socket for future communication.</td>
<td>When turned on, handles each AVL packet iteration as a new connection. When turned off, connects once and uses the same socket for future communication.</td>
</tr>
<tr>
<td>Static Navigation</td>
<td>off | on; default: <b>off</b></td>
<td>Stop collecting NMEA data if object is stationary. Ignores data when speed equals to 0 or same as previous coordinates (rounded to 4 decimals).</td>
</tr>
</tr>
</table>
</table>
{{#switch: {{{name}}}
{{#switch: {{{name}}}
| RUT955|RUT956=[[File:Networking_rut955_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
| RUT955|RUT956=[[File:Networking_rut955_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
| #default=[[File:Networking_rutos_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
| #default=[[File:Networking_rutos_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
}}
}}
The figure below is an example of GPS Geofencing configuration and the table below provides information related to that configuration:
The figure below is an example of GPS Geofencing configuration and the table below provides information related to that configuration:
[[File:Networking_rutos_manual_gps_gps_geofencing_geofencing_details.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_gps_gps_geofencing_geofencing_details_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>Exit | Enter | Enter/exit; default: <b>Exit</b></td>
<td>Exit | Enter | Enter/exit; default: <b>Exit</b></td>
<td>Specifies whether the rule should be triggered when the device enters the geofence area, leaves it or on both events.</td>
<td>Specifies whether the rule should be triggered when the device enters the geofence area, leaves it or on both events.</td>
</tr>
<tr>
<td>Switch profile</td>
<td>configuration profiles; default: <b>none</b></td>
<td>Selects a profile to switch to on this geofencing event.</td>
</tr>
</tr>
<tr>
<tr>
