Changes

Template:Networking rutos manual gps (view source)

Revision as of 14:41, 22 January 2024

11,914 bytes added ,  22 January
no edit summary
Line 1: Line 1: −
<!-- Template uses {{{name}}}, {{{series}}}   -->
+
{{Template: Networking_device_manual_fw_disclosure
−
{{Template:Networking_rutos_manual_fw_disclosure
+
| series = {{{series}}}
−
| fw_version = {{{series}}}_R_00.02.05
+
| name  = {{{name}}}
−
| series    = {{{series}}}
+
| fw_version ={{Template: Networking_device_manual_latest_fw
 +
| series = {{{series}}}
 +
| name  = {{{name}}}
 +
}}
 
}}
 
}}
−
 
+
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} GPS (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
 
==Summary==
 
==Summary==
    
The <b>Global Positioning System</b> (<b>GPS</b>) is a space-based radionavigation system. This page is an overview of the GPS service in {{{name}}} devices.
 
The <b>Global Positioning System</b> (<b>GPS</b>) is a space-based radionavigation system. This page is an overview of the GPS service in {{{name}}} devices.
−
  −
{{Template:Networking_rutos_manual_basic_advanced_webui_disclaimer
  −
| series = {{{series}}}
  −
}}
  −
  −
==Map==
  −
  −
The <b>Map</b> page displays the device's current coordinates and position on the map. To see the device's location on the map, make sure to attach the GPS antenna on the device and enable GPS in the [[#General|General]] page.
  −
  −
The figure below is an example of the Map page:
  −
  −
[[File:Networking_rutos_manual_gps_map.png|border|class=tlt-border]]
      
==General==
 
==General==
Line 27: Line 18:  
The figure below is an example of the General page and the table below provides information on the fields contained in that page:
 
The figure below is an example of the General page and the table below provides information on the fields contained in that page:
   −
[[File:Networking_rutos_manual_gps_general.png|border|class=tlt-border]]
+
{{#switch: {{{name}}}
−
 
+
| RUT906 | RUT956 | RUT955 = [[File:Networking_rutos_manual_gps_general_rut906.png|border|class=tlt-border]]
 +
| #default = [[File:Networking_rutos_manual_gps_general_v2.png|border|class=tlt-border]]}}
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 37: Line 29:  
     <tr>
 
     <tr>
 
         <td>Enabled</td>
 
         <td>Enabled</td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns the GPS service on or off.</td>
 
         <td>Turns the GPS service on or off.</td>
 +
    </tr>{{#switch: {{{name}}} | RUT906 | RUT956 = | #default =
 +
    <tr>
 +
        <td>DPO enabled</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Enable dynamic power optimization (requires modem reboot). <b>This function is not supported on devices with Meig modems or Quectel BG95 modem</b> </td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Galileo NMEA support<span class="asterisk">*</span></td>
 
         <td>Galileo NMEA support<span class="asterisk">*</span></td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns support for Galileo satellites on or off.</td>
 
         <td>Turns support for Galileo satellites on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Glonass NMEA support<span class="asterisk">*</span></td>
 
         <td>Glonass NMEA support<span class="asterisk">*</span></td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns support for Glonass satellites on or off.</td>
 
         <td>Turns support for Glonass satellites on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>BeiDou NMEA support<span class="asterisk">*</span></td>
 
         <td>BeiDou NMEA support<span class="asterisk">*</span></td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns support for BeiDou satellites on or off.</td>
 
         <td>Turns support for BeiDou satellites on or off.</td>
−
     </tr>
+
     </tr>}}
 
</table>
 
</table>
    
<span class="asterisk">*</span>Changing these options requires a modem reboot. Therefore, if you make changes to these options and save them, the device will lose cellular connectivity for about 30 seconds.
 
<span class="asterisk">*</span>Changing these options requires a modem reboot. Therefore, if you make changes to these options and save them, the device will lose cellular connectivity for about 30 seconds.
 +
 +
==Map==
 +
 +
The <b>Map</b> page displays the device's current coordinates and position on the map. To see the device's location on the map, make sure to attach the GPS antenna on the device and enable GPS in the [[#General|General]] page.
 +
 +
The figure below is an example of the Map page:
 +
 +
[[File:Networking_rutos_manual_gps_map_v3.png|border|class=tlt-border]]
    
==NMEA==
 
==NMEA==
Line 67: Line 72:  
The <b>NMEA forwarding</b> section is used to configure and enable NMEA forwarding. The figure below is an example of the NMEA forwarding section and the table below provides information on the fields contained in that section:
 
The <b>NMEA forwarding</b> section is used to configure and enable NMEA forwarding. The figure below is an example of the NMEA forwarding section and the table below provides information on the fields contained in that section:
   −
[[File:Networking_rutos_manual_gps_nmea_nmea_forwarding.png]]
+
[[File:Networking rutos manual gps nmea nmea forwarding v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 82: Line 87:  
     <tr>
 
     <tr>
 
         <td>Hostname</td>
 
         <td>Hostname</td>
−
         <td>ip | host; default: '''192.168.1.5'''</td>
+
         <td>ip | host; default: '''none'''</td>
 
         <td>IP address or hostname of the server to which NMEA data will be forwarded.</td>
 
         <td>IP address or hostname of the server to which NMEA data will be forwarded.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Protocol</td>
 +
        <td>TCP | UDP; default: <b>TCP</b></td>
 +
        <td>Protocol that will be used to send NMEA data.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 91: Line 101:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Protocol</td>
+
         <td>Contain connection</td>
−
         <td>TCP | UDP; default: <b>TCP</b></td>
+
         <td>off | on; default: <b>off</b></td>
−
         <td>Protocol that will be used to send NMEA data.</td>
+
         <td>Contains active session with the remote server if turned on.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Select prefix</td>
 +
        <td>Custom | None |Serial | Mac address | IMEI; default: <b>None</b></td>
 +
        <td>Prefix is added to the NMEA sentence before it is transmitted. </td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 130: Line 145:  
The <b>NMEA collecting</b> section is used to enable NMEA sentence gathering and storing. The figure below is an example of the NMEA collecting section and the table below provides information on the fields contained in that section:
 
The <b>NMEA collecting</b> section is used to enable NMEA sentence gathering and storing. The figure below is an example of the NMEA collecting section and the table below provides information on the fields contained in that section:
   −
[[File:Networking_rutos_manual_gps_nmea_nmea_collecting.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_nmea_nmea_collecting_v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 144: Line 159:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Location</td>
+
         <td>File</td>
 
         <td>filepath; default: <b>none</b></td>
 
         <td>filepath; default: <b>none</b></td>
 
         <td>Location of the file where NMEA sentences will be stored. This field becomes visible only when NMEA collecting is enabled.</td>
 
         <td>Location of the file where NMEA sentences will be stored. This field becomes visible only when NMEA collecting is enabled.</td>
Line 200: Line 215:  
     <tr>
 
     <tr>
 
         <td><b>GPVTG</b></td>
 
         <td><b>GPVTG</b></td>
−
         <td>Track made good and speed relative to the ground.</td>
+
         <td>GPS track made good and speed relative to the ground.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 225: Line 240:  
         <td><b>GAGSV</b></td>
 
         <td><b>GAGSV</b></td>
 
         <td>Number of Galileo satellites in view.</td>
 
         <td>Number of Galileo satellites in view.</td>
 +
    </tr>
 +
        <tr>
 +
        <td><b>GARMC</b></td>
 +
        <td>Recomended minimum specific for Galileo data.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><b>GAGGA</b></td>
 +
        <td>Galileo fix data.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><b>GAGSA</b></td>
 +
        <td>Galileo DOP and active satellites.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><b>GAVTG</b></td>
 +
        <td>Galileo track made good and speed information relative to the ground.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td><b>PQGSV</b></td>
 
         <td><b>PQGSV</b></td>
 +
        <td>Detailed satellite data (used in BeiDou and QZSS (Quectel Quirk) sentences).</td>
 +
    </tr>
 +
    <tr>
 +
        <td><b>PQGSA</b></td>
 +
        <td>Overall satellite data (used in BeiDou and QZSS (Quectel Quirk) sentences).</td>
 +
    </tr>
 +
    <tr>
 +
        <td><b>GBGSV</b></td>
 
         <td>Detailed satellite data (used in BeiDou sentences).</td>
 
         <td>Detailed satellite data (used in BeiDou sentences).</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td><b>PQGSA</b></td>
+
         <td><b>GBGSA</b></td>
−
         <td>Overall satellite data (used in BeiDou sentences).</td>
+
         <td>BeiDou DOP and active satellites.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><b>GQGSV</b></td>
 +
        <td>Detailed QZSS satellite data (QZSS regional GPS augmentation system (Japan)).</td>
 +
    </tr>
 +
    <tr>
 +
        <td><b>GQGSA</b></td>
 +
        <td>QZSS DOP and active satellites (QZSS regional GPS augmentation system (Japan)).</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 245: Line 292:  
The HTTPS/HTTP Server Settings section is used to enable GPS data sending to an HTTP or HTTPS server.
 
The HTTPS/HTTP Server Settings section is used to enable GPS data sending to an HTTP or HTTPS server.
   −
[[File:Networking_rutos_manual_gps_https_server_settings.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_https_server_settings_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 255: Line 302:  
     <tr>
 
     <tr>
 
         <td>Enabled</td>
 
         <td>Enabled</td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns data sending to HTTP/HTTPS server on or off.</td>
 
         <td>Turns data sending to HTTP/HTTPS server on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>URL</td>
 
         <td>URL</td>
−
         <td>string; default: '''192.168.1.5'''</td>
+
         <td>url string; default: <b>none</b></td>
−
         <td>URL of remote server.</td>
+
         <td>URL of the remote server (ex. example.com/xxxx).</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Interval</td>
 +
        <td>integer; default: <b>none</b></td>
 +
        <td>Interval on which collected NMEA sentences should be forwarded.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 268: Line 320:  
----
 
----
 
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
 
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
−
 
+
{{#switch: {{{name}}}
−
[[File:Networking_rutos_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
+
| RUT955 | RUT956 | RUT906 = [[File:Networking_rut955_manual_gps_https_tavl_settings_v2.png|border|class=tlt-border]]
−
 
+
| TRB245 | TRB246 | TRB255 | TRB256 = [[File:Networking_trb245_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
−
<table class="nd-mantable">
+
| #default = [[File:Networking_rutos_manual_gps_https_tavl_settings_v2.png|border|class=tlt-border]]
 +
}}
 +
{{#switch: {{{name}}}
 +
| #default = <table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Signal</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din1</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Din1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
</table>
 +
| RUT955 | RUT956 | RUT906 = <table class="nd-mantable">
 
     <tr>
 
     <tr>
 
         <th>Field</th>
 
         <th>Field</th>
Line 278: Line 350:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Send GSM signal</td>
+
       <td>Signal</td>
−
       <td>off | on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 
       <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td>Send digital input</td>
+
     <td>Din1</td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
−
         <td>Includes digital input state in the GPS data sent to server.</td>
+
         <td>Includes Din1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din2</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Din2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din2</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Din2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Iio</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Iio status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Adc0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Adc0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Acl0</td>
 +
        <td><span style="color: red;">Current {{!}} Percent</span>; off {{!}} on; default: <b><span style="color: red;">Current</span>; off</b></td>
 +
        <td>Includes Acl0 Current/Percent information in the GPS data sent to server.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
| TRB245 | TRB246 | TRB255 | TRB256 = <table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Signal</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio1</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio2</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Adc0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Adc0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
</table>}}
    
==AVL==
 
==AVL==
Line 297: Line 426:  
The <b>AVL server settings</b> section is used to configure the main parameters of data sending to an AVL server. The figure below is an example of the AVL Server Settings section and the table below provides information on the fields contained in that section:  
 
The <b>AVL server settings</b> section is used to configure the main parameters of data sending to an AVL server. The figure below is an example of the AVL Server Settings section and the table below provides information on the fields contained in that section:  
   −
[[File:Networking_rutos_manual_gps_avl_avl_server_settings.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_avl_avl_server_settings_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 309: Line 438:  
         <td>off | on; default: <b>off</b></td>
 
         <td>off | on; default: <b>off</b></td>
 
         <td>Turns data sending to AVL server on or off.</td>
 
         <td>Turns data sending to AVL server on or off.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Retry on Fail</td>
 +
        <td>off | on; default: <b>off</b></td>
 +
        <td>Turn retries in case of a failed attempts on or off. When turned on, the device will try to send the same data to the server until the transmission is successful.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Hostname</td>
 
         <td>Hostname</td>
−
         <td>ip | host; default: '''192.168.1.5'''</td>
+
         <td>ip | host; default: <b>192.168.0.1</b></td>
 
         <td>IP address or hostname of an AVL server.</td>
 
         <td>IP address or hostname of an AVL server.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Protocol</td>
 +
        <td>TCP | UDP; Default: <b>TCP</b></td>
 +
        <td>Protocol that will be used for communication with the AVL server.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 321: Line 460:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Protocol</td>
+
         <td>Don't Contain Connection</td>
−
         <td>TCP | UDP; Default: <b>TCP</b></td>
+
         <td>off | on; default: <b>off</b></td>
−
         <td>Protocol that will be used for communication with the AVL server.</td>
+
         <td>When turned on, handles each AVL packet iteration as a new connection. When turned off, connects once and uses the same socket for future communication.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Static Navigation</td>
 +
        <td>off | on; default: <b>off</b></td>
 +
        <td>Stop collecting NMEA data if object is stationary. Ignores data when speed equals to 0 or same as previous coordinates (rounded to 4 decimals).</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 331: Line 475:  
The <b>Main rule</b> section defines how and when GPS data will be collected and sent to a specified AVL server. Refer to the figure and table below for information on the configuration fields of Main Rule.
 
The <b>Main rule</b> section defines how and when GPS data will be collected and sent to a specified AVL server. Refer to the figure and table below for information on the configuration fields of Main Rule.
   −
[[File:Networking_rutos_manual_gps_avl_main_rule.png|border|class=tlt-border]]
+
[[File:Networking rutos manual gps avl main rule v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 370: Line 514:  
         <td>integer [1..360]; default: <b>50</b></td>
 
         <td>integer [1..360]; default: <b>50</b></td>
 
         <td>Minimum angle change (in degrees) before sending records.</td>
 
         <td>Minimum angle change (in degrees) before sending records.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Min accuracy</td>
 +
        <td>integer [1..999999]; default: <b>10</b></td>
 +
        <td>Minimum accuracy (in meters) required before saving record. The lower the accuracy value, the better.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 389: Line 538:  
Refer to the figure and table below for information on the configuration fields of the Secondary rules section.
 
Refer to the figure and table below for information on the configuration fields of the Secondary rules section.
   −
[[File:Networking_rutos_manual_gps_avl_secondary_rules.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_avl_secondary_rules_{{{series}}}_v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 408: Line 557:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Digital Isolated Input</td>
+
         <td>Ignore</td>
−
         <td>Low logic level | High logic level | Both; default: <b>Low logic level</b></td>
+
        <td>off | on; default: <b>off</b></td>
 +
        <td>If enabled, the rule ignores state of input.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>IO level</td>
 +
         <td>Low level {{!}} High level {{!}} Both; default: <b>High level</b></td>
 
         <td>Selects which input state will trigger the rule.</td>
 
         <td>Selects which input state will trigger the rule.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>IO type</td>
 +
        <td>GPIO; default: <b>GPIO</b></td>
 +
        <td>Selects input type.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>IO name</td>{{#switch:{{{series}}}
 +
| RUT9 =<td>Input (3) {{!}} Input (1) {{!}} Isolated Input (2,7); default: <b>Input (1)</b></td>
 +
| RUTX =<td>Input (4); default: <b>Input (3)</b></td>
 +
| TRB2 | TRB2M =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>}}
 +
        <td>Selects which specific input will trigger the rule.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 438: Line 604:  
         <td>integer [1..360]; default: '''25'''</td>
 
         <td>integer [1..360]; default: '''25'''</td>
 
         <td>Minimum angle change (in degrees) before sending records.</td>
 
         <td>Minimum angle change (in degrees) before sending records.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Min accuracy</td>
 +
        <td>integer [1..999999]; default: <b>10</b></td>
 +
        <td>Minimum accuracy (in meters) required before saving record. The lower the accuracy value, the better.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 455: Line 626:  
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
 
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
   −
[[File:Networking_rutos_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
+
{{#switch: {{{name}}}
−
 
+
| RUT955 | RUT956 | RUT906 = [[File:Networking_rut955_manual_gps_https_tavl_settings_v2.png|border|class=tlt-border]]
−
<table class="nd-mantable">
+
| TRB245 | TRB246 | TRB255 | TRB256 = [[File:Networking_trb245_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
 +
| #default = [[File:Networking_rutos_manual_gps_https_tavl_settings_v2.png|border|class=tlt-border]]
 +
}}
 +
{{#switch: {{{name}}}
 +
| #default = <table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Signal</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din1</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Din1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
</table>
 +
| RUT955 | RUT956 | RUT906 = <table class="nd-mantable">
 
     <tr>
 
     <tr>
 
         <th>Field</th>
 
         <th>Field</th>
Line 464: Line 656:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>Send GSM signal</td>
+
       <td>Signal</td>
−
       <td>off | on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 
       <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td>Send digital input</td>
+
     <td>Din1</td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
−
         <td>Includes digital input state in the GPS data sent to server.</td>
+
         <td>Includes Din1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din2</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Din2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din2</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Din2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Iio</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Iio status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Adc0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Adc0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Acl0</td>
 +
        <td><span style="color: red;">Current {{!}} Percent</span>; off {{!}} on; default: <b><span style="color: red;">Current</span>; off</b></td>
 +
        <td>Includes Acl0 Current/Percent information in the GPS data sent to server.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
| TRB245 | TRB246 | TRB255 | TRB256 = <table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Signal</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio1</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio2</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Adc0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Adc0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
</table>}}
    
==AVL I/O==
 
==AVL I/O==
    
The <b>AVL I/O</b> tab provides you with the possibility to configure input rules.
 
The <b>AVL I/O</b> tab provides you with the possibility to configure input rules.
−
{{#ifeq: {{{analog}}} | 1 |
  −
===Check Analog===
  −
----
  −
The <b>Check Analog</b> section is used to set how often the device checks the value of the analog input. This is relevant to input rules related to the analog input.
     −
[[File:Networking_rutos_manual_gps_avl_io_check_analog.png|border|class=tlt-border]]
  −
|}}
   
===Input Rules===
 
===Input Rules===
 
----
 
----
−
The <b>Input Rules</b> section displays existing input rules. To create a new input rule look to the section below (<i>AVL Input Configuration</i>), select input type, trigger and click the 'Add' button.
+
The <b>Input Rules</b> section displays existing input rules. To create a new input rule click the 'Add' button.
   −
[[File:Networking_rutos_manual_gps_avl_io_input_rules_add_button_config_io_{{{config_io}}}.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_avl_io_input_rules_add_button.png|border|class=tlt-border]]
    
After this you should be redirected to configuration page of the newly added rule, which should look similar to this:
 
After this you should be redirected to configuration page of the newly added rule, which should look similar to this:
   −
[[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration_config_io_{{{config_io}}}.png|border|class=tlt-border]]
+
{{#switch: {{{name}}}  
 +
| RUT955 | RUT956 | RUT906 = [[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration_rut955.png|border|class=tlt-border]]
 +
| TRB245 | TRB246 | TRB255 | TRB256 = [[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration_trb245.png|border|class=tlt-border]]
 +
| #default = [[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration.png|border|class=tlt-border]]}}
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 508: Line 754:  
     <tr>
 
     <tr>
 
         <td>Input type</td>
 
         <td>Input type</td>
−
         <td>{{{input_types}}}; default: <b>{{#ifeq:{{{config_io}}}|1|Configurable Input/Output (3)|Input (3)}}</b></td>
+
         <td>{{#switch:{{{name}}}| RUT955|RUT956|RUT906 = <span style="color: red;">Analog Current Loop (6,9)</span> {{!}} <span style="color: blue;">Analog Input (6,9)</span> {{!}}  Input (3) {{!}} Digital Input (1) {{!}}  Isolated Input (2,7); default: <b>Analog Current Loop (6,9)</b>| TRB245|TRB246|TRB255|TRB256 = <span style="color: red;">Analog Input (11)</span> {{!}} Configurable Input/Output (2) {{!}} Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Analog Input (11)</b>| #default = Input (3); default: <b>Input (3)</b>}}</td>
−
         <td>Selects to which input the rule will apply.</td>
+
         <td>Select type on your own intended configuration.</td>
−
     </tr>{{#ifeq: {{{analog}}} | 1 |
+
     </tr>{{#switch:{{{name}}}| RUT955|RUT956|RUT906 =
 +
    <tr>
 +
        <td><span style="color: red;">ACL Property</span></td>
 +
        <td>Current {{!}} Percent; default: <b>Current</b></td>
 +
        <td>Select which property - ampere or percentage the condition listens to.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: red;">Min current</span></td>
 +
        <td>float [4..20]; default: <b>none</b></td>
 +
        <td>Specifies minimum current of the range. Values between 4-20mA.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: red;">Max current</span></td>
 +
        <td>float [4..20]; default: <b>none</b></td>
 +
        <td>Specifies maximum current of the range. Values between minimum-20mA.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: blue;">Min voltage</span></td>
 +
        <td>float [0..40]; default: <b>none</b></td>
 +
        <td>Specify minimum voltage range.</td>
 +
    </tr>
 +
        <tr>
 +
        <td><span style="color: blue;">Max voltage</span></td>
 +
        <td>float [0..40]; default: <b>none</b></td>
 +
        <td>Specify maximum voltage range.</td>
 +
    </tr>| TR245|TRB246|TRB255|TRB256 =   
 
     <tr>
 
     <tr>
 
         <td><span style="color: red;">Min voltage</span></td>
 
         <td><span style="color: red;">Min voltage</span></td>
 
         <td>float [0..40]; default: <b>none</b></td>
 
         <td>float [0..40]; default: <b>none</b></td>
−
         <td>Minimum analog input voltage range value that will trigger the rule.<br><b>Note:</b> this field is visible only when the selected 'Input type' is <i>Analog Input (11)</i>.</td>
+
         <td>Specify minimum voltage range.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td><span style="color: red;">Max voltage</span></td>
 
         <td><span style="color: red;">Max voltage</span></td>
 
         <td>float [0..40]; default: <b>none</b></td>
 
         <td>float [0..40]; default: <b>none</b></td>
−
         <td>Maximum analog input voltage range value that will trigger the rule.<br><b>Note:</b> this field is visible only when the selected 'Input type' is <i>Analog Input (11)</i>.</td>
+
         <td>Specify maximum voltage range.</td>
−
     </tr>|}}
+
     </tr>| #default =}}
 
     <tr>
 
     <tr>
 
         <td>Trigger</td>
 
         <td>Trigger</td>
−
         <td>{{#ifeq:{{{analog}}}|1|<span style="color: blue;">Configurable I/O:</span>|}} Input active | Input low | Both{{#ifeq:{{{analog}}}|1|<br><span style="color: red;">Analog Input:</span> Inside range {{!}} Outside range|}}; default: <b>Input active</b></td>
+
         <td>{{#switch:{{{name}}}| RUT955|RUT956|RUT906 = <span style="color: red;">Inside range</span> {{!}} <span style="color: red;">Outside range</span>; <span style="color: blue;">Inside range</span> {{!}} <span style="color: blue;">Outside range; </span> Input active {{!}} Input low {{!}} Both; default: <b><span style="color: red;">Inside range</span>; <span style="color: blue;">Inside range</span>; Input active</b>|TRB245|TRB246|TRB255|TRB256 = <span style="color: red;">Inside range</span> {{!}} <span style="color: red;">Outside range; </span> Input active {{!}} Input low {{!}} Both; default: <b><span style="color: red;">Inside range</span>; Input active</b>|#default = Input active {{!}} Input low {{!}} Both; default: <b>Input active</b>}}</td>
−
         <td>The event that will trigger the rule.</td>
+
         <td>{{#switch:{{{name}}}| RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB256=<span style="color: red;">Inside range - Input voltage falls in the specified region, Outside range - Input voltage drops out of the specified region</span>; Select trigger event for your own intended configuration.|#default = Select trigger event for your own intended configuration.}}</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Priority</td>
 
         <td>Priority</td>
−
         <td>Low | High; default: <b>Low</b></td>
+
         <td>Low | High | Panic | Security; default: <b>Low</b></td>
−
         <td>The rule's priority. Different priority settings add different flags to event packets, so they can be displayed differently in the receiving system. The device sends data of higher priority first. Priority levels from highest to lowest are as follows:
+
         <td>The rule's priority. Different priority settings add different flags to event packets, so they can be displayed differently in the receiving system. The device sends data of higher priority first.</td>
−
            <ol>
  −
                <!--<li>Panic</li>-->
  −
                <li>High</li>
  −
                <li>Low</li>
  −
            </ol>
  −
        </td>
   
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 547: Line 812:  
The figure below is an example of GPS Geofencing configuration and the table below provides information related to that configuration:
 
The figure below is an example of GPS Geofencing configuration and the table below provides information related to that configuration:
   −
[[File:Networking_rutos_manual_gps_gps_geofencing_geofencing_details.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_gps_geofencing_geofencing_details_v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 579: Line 844:  
         <td>Exit | Enter | Enter/exit; default: <b>Exit</b></td>
 
         <td>Exit | Enter | Enter/exit; default: <b>Exit</b></td>
 
         <td>Specifies whether the rule should be triggered when the device enters the geofence area, leaves it or on both events.</td>
 
         <td>Specifies whether the rule should be triggered when the device enters the geofence area, leaves it or on both events.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Switch profile</td>
 +
        <td>configuration profiles; default: <b>none</b></td>
 +
        <td>Selects a profile to switch to on this geofencing event.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/70711...119549"

Navigation menu