Teltonika Networks Wiki

Changes

Template:Networking rutos manual gps (view source)

Revision as of 13:28, 19 April 2024

9,017 bytes added ,  19 April
no edit summary
Line 1: Line 1: −
{{Template: Networking_rutos_manual_fw_disclosure
+
{{Template: Networking_device_manual_fw_disclosure
−
| fw_version ={{Template: Networking_rutos_manual_latest_fw
+
| series = {{{series}}}
 +
| name  = {{{name}}}
 +
| fw_version ={{Template: Networking_device_manual_latest_fw
 
  | series = {{{series}}}
 
  | series = {{{series}}}
 
  | name  = {{{name}}}
 
  | name  = {{{name}}}
 
  }}
 
  }}
 
}}
 
}}
−
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} GPS (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
+
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} GPS (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
 
==Summary==
 
==Summary==
   Line 16: Line 18:  
The figure below is an example of the General page and the table below provides information on the fields contained in that page:
 
The figure below is an example of the General page and the table below provides information on the fields contained in that page:
   −
[[File:Networking_rutos_manual_gps_general_v2.png|border|class=tlt-border]]
+
{{#switch: {{{name}}}
−
 
+
| RUT906 | RUT956 | RUT955 = [[File:Networking_rutos_manual_gps_general_rut906.png|border|class=tlt-border]]
 +
| TRB256 = [[File:Networking rutos manual gps general trb256.png|border|class=tlt-border]]
 +
| #default = [[File:Networking_rutos_manual_gps_general_v2.png|border|class=tlt-border]]}}
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 26: Line 30:  
     <tr>
 
     <tr>
 
         <td>Enabled</td>
 
         <td>Enabled</td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns the GPS service on or off.</td>
 
         <td>Turns the GPS service on or off.</td>
 +
    </tr>{{#switch: {{{name}}} | RUT906 | RUT956 = 
 +
    | TRB256 =
 +
    <tr>
 +
        <td>Mode</td>
 +
        <td>GNSS Only {{!}} <span style="color: red;">WWAN + GNSS</span>; default: <b>GNSS Only</b></td>
 +
        <td>WWAN and GNSS coexistence mode.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: red;">Interval</span></td>
 +
        <td>integer [60..86400]; default: <b>300</b></td>
 +
        <td>How frequently should GNSS be activated (seconds).</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: red;">Timeout</span></td>
 +
        <td>integer [30..999]; default: <b>100</b></td>
 +
        <td>Maximum GNSS position fix waiting time (seconds).</td>
 
     </tr>
 
     </tr>
 +
    | #default =
 
     <tr>
 
     <tr>
 
         <td>DPO enabled</td>
 
         <td>DPO enabled</td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
−
         <td>Enable dynamic power optimization (requires modem reboot) </td>
+
         <td>Enable dynamic power optimization (requires modem reboot). <b>This function is not supported on devices with Meig modems or Quectel BG95 modem</b> </td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Galileo NMEA support<span class="asterisk">*</span></td>
 
         <td>Galileo NMEA support<span class="asterisk">*</span></td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns support for Galileo satellites on or off.</td>
 
         <td>Turns support for Galileo satellites on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Glonass NMEA support<span class="asterisk">*</span></td>
 
         <td>Glonass NMEA support<span class="asterisk">*</span></td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns support for Glonass satellites on or off.</td>
 
         <td>Turns support for Glonass satellites on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>BeiDou NMEA support<span class="asterisk">*</span></td>
 
         <td>BeiDou NMEA support<span class="asterisk">*</span></td>
−
         <td>off | on; default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns support for BeiDou satellites on or off.</td>
 
         <td>Turns support for BeiDou satellites on or off.</td>
−
     </tr>
+
     </tr>}}
 
</table>
 
</table>
   Line 59: Line 80:  
The figure below is an example of the Map page:
 
The figure below is an example of the Map page:
   −
[[File:Networking_rutos_manual_gps_map_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_map_v4.png|border|class=tlt-border]]
    
==NMEA==
 
==NMEA==
Line 103: Line 124:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Contain connection</td>
+
         <td>Select prefix</td>
 
         <td>Custom | None |Serial | Mac address | IMEI; default: <b>None</b></td>
 
         <td>Custom | None |Serial | Mac address | IMEI; default: <b>None</b></td>
 
         <td>Prefix is added to the NMEA sentence before it is transmitted. </td>
 
         <td>Prefix is added to the NMEA sentence before it is transmitted. </td>
Line 142: Line 163:  
The <b>NMEA collecting</b> section is used to enable NMEA sentence gathering and storing. The figure below is an example of the NMEA collecting section and the table below provides information on the fields contained in that section:
 
The <b>NMEA collecting</b> section is used to enable NMEA sentence gathering and storing. The figure below is an example of the NMEA collecting section and the table below provides information on the fields contained in that section:
   −
[[File:Networking_rutos_manual_gps_nmea_nmea_collecting.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_nmea_nmea_collecting_v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 289: Line 310:  
The HTTPS/HTTP Server Settings section is used to enable GPS data sending to an HTTP or HTTPS server.
 
The HTTPS/HTTP Server Settings section is used to enable GPS data sending to an HTTP or HTTPS server.
   −
[[File:Networking_rutos_manual_gps_https_server_settings.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_https_server_settings_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 299: Line 320:  
     <tr>
 
     <tr>
 
         <td>Enabled</td>
 
         <td>Enabled</td>
−
         <td>off | <span style="color: #20C0D7;"><b>on</b></span> default: <b>off</b></td>
+
         <td>off {{!}} on; default: <b>off</b></td>
 
         <td>Turns data sending to HTTP/HTTPS server on or off.</td>
 
         <td>Turns data sending to HTTP/HTTPS server on or off.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td><span style="color: #20C0D7;">URL</span></td>
+
         <td>URL</td>
 
         <td>url string; default: <b>none</b></td>
 
         <td>url string; default: <b>none</b></td>
−
         <td>URL of remote server.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td>
+
         <td>URL of the remote server (ex. example.com/xxxx).</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td><span style="color: #20C0D7;">Delay</span></td>
+
         <td>Interval</td>
 
         <td>integer; default: <b>none</b></td>
 
         <td>integer; default: <b>none</b></td>
−
         <td>Time interval in seconds between sending packages.<br><i>This field becomes visible when Enabled is set to 'on'.</i></td>
+
         <td>Interval on which collected NMEA sentences should be forwarded.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 318: Line 339:  
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
 
The <b>TAVL settings</b> section is used to select which data will be sent to the TAVL server:
 
{{#switch: {{{name}}}  
 
{{#switch: {{{name}}}  
−
  | RUT955|RUT956=[[File:Networking_rut955_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
+
  | RUT955 | RUT956 | RUT906 = [[File:Networking_rut955_manual_gps_https_tavl_settings_v3.png|border|class=tlt-border]]
−
  | #default=[[File:Networking_rutos_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
+
| TRB245 | TRB246 | TRB255 | TRB256 = [[File:Networking_trb245_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
 +
  | #default = [[File:Networking_rutos_manual_gps_https_tavl_settings_v3.png|border|class=tlt-border]]
 
}}
 
}}
−
 
+
{{#switch: {{{name}}}
−
<table class="nd-mantable">
+
| #default = <table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Signal</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Input (3)</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes din1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>HDOP</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes horizontal dilution of precision in the GPS data sent to server.</td>
 +
    </tr>
 +
</table>
 +
| RUT955 | RUT956 | RUT906 = <table class="nd-mantable">
 
     <tr>
 
     <tr>
 
         <th>Field</th>
 
         <th>Field</th>
Line 330: Line 374:  
     <tr>
 
     <tr>
 
       <td>Signal</td>
 
       <td>Signal</td>
−
       <td>off | on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 
       <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td>Input/Output (<i>various</i>)</td>
+
     <td>Input (3)</td>
−
         <td>off | on; default: <b>off</b></td>
+
        <td>off {{!}} on; default: <b>off</b></td>
−
         <td>Includes Input/Output status information in the GPS data sent to server.</td>
+
        <td>Includes din1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Digital Input (1)</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes din2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Isolated Input (2,7)</td>
 +
         <td>off {{!}} on; default: <b>off</b></td>
 +
         <td>Includes iio status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Analog Input (6,9)</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Adc0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Analog Current Loop (6,9)</td>
 +
        <td><span style="color: red;">Current {{!}} Percent</span>; off {{!}} on; default: <b><span style="color: red;">Current</span>; off</b></td>
 +
        <td>Includes Acl0 Current/Percent information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>HDOP</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes horizontal dilution of precision in the GPS data sent to server.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
| TRB245 | TRB246 | TRB255 | TRB256 = <table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Signal</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Configurable Input/Output (2)</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Configurable Input/Output (3) </td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Configurable Input/Output (4)</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Analog Input (11)</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Adc0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>HDOP</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes horizontal dilution of precision in the GPS data sent to server.</td>
 +
    </tr>
 +
</table>}}
    
==AVL==
 
==AVL==
Line 489: Line 595:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>IO type</td>
+
         <td>IO type</td>{{#switch:{{{name}}}
−
        <td>GPIO; default: <b>GPIO</b></td>
+
| RUT955 | RUT956 | RUT906 =<td>GPIO {{!}} ADC {{!}} ACL; default: <b>GPIO</b></td>
 +
| TRB245 | TRB246 | TRB255 | TRB256 =<td>GPIO {{!}} ADC; default: GPIO <b></b></td>
 +
| #default =<td>GPIO; default: GPIO <b></b></td>}}
 
         <td>Selects input type.</td>
 
         <td>Selects input type.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>IO name</td>{{#switch:{{{series}}}
+
         <td>IO name</td>{{#switch:{{{name}}}
−
| RUT9 =<td>Input (3) {{!}} Input (1) {{!}} Isolated Input (2,7); default: <b>Input (1)</b></td>
+
| RUT955 | RUT956 | RUT906 =<td>Input (3) {{!}} Input (1) {{!}} Isolated Input (2,7); default: <b>Input (1)</b></td>
−
| RUTX =<td>Input (4); default: <b>Input (3)</b></td>
+
| TRB245 | TRB246 | TRB255 | TRB256 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>
−
| TRB2 =<td>Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Configurable Input/Output (3)</b></td>}}
+
| #default =<td>Input (4); default: <b>Input (3)</b></td>}}
 
         <td>Selects which specific input will trigger the rule.</td>
 
         <td>Selects which specific input will trigger the rule.</td>
 
     </tr>
 
     </tr>
Line 526: Line 634:  
         <td>integer [1..360]; default: '''25'''</td>
 
         <td>integer [1..360]; default: '''25'''</td>
 
         <td>Minimum angle change (in degrees) before sending records.</td>
 
         <td>Minimum angle change (in degrees) before sending records.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Min accuracy</td>
 +
        <td>integer [1..999999]; default: <b>10</b></td>
 +
        <td>Minimum accuracy (in meters) required before saving record. The lower the accuracy value, the better.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 544: Line 657:     
{{#switch: {{{name}}}  
 
{{#switch: {{{name}}}  
−
  | RUT955|RUT956=[[File:Networking_rut955_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
+
  | RUT955 | RUT956 | RUT906 = [[File:Networking_rut955_manual_gps_https_tavl_settings_v2.png|border|class=tlt-border]]
−
  | #default=[[File:Networking_rutos_manual_gps_https_tavl_settings_v1.png|border|class=tlt-border]]
+
| TRB245 | TRB246 | TRB255 | TRB256 = [[File:Networking_trb245_manual_gps_https_tavl_settings.png|border|class=tlt-border]]
 +
  | #default = [[File:Networking_rutos_manual_gps_https_tavl_settings_v2.png|border|class=tlt-border]]
 
}}
 
}}
−
 
+
{{#switch: {{{name}}}
−
<table class="nd-mantable">
+
| #default = <table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Signal</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din1</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Din1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
</table>
 +
| RUT955 | RUT956 | RUT906 = <table class="nd-mantable">
 
     <tr>
 
     <tr>
 
         <th>Field</th>
 
         <th>Field</th>
Line 556: Line 687:  
     <tr>
 
     <tr>
 
       <td>Signal</td>
 
       <td>Signal</td>
−
       <td>off | on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 
       <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
     <td>Input/Output (<i>various</i>)</td>
+
     <td>Din1</td>
−
         <td>off | on; default: <b>off</b></td>
+
        <td>off {{!}} on; default: <b>off</b></td>
−
         <td>Includes Input/Output status information in the GPS data sent to server.</td>
+
        <td>Includes Din1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din2</td>
 +
         <td>off {{!}} on; default: <b>off</b></td>
 +
         <td>Includes Din2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Din2</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Din2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Iio</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Iio status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Adc0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Adc0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Acl0</td>
 +
        <td><span style="color: red;">Current {{!}} Percent</span>; off {{!}} on; default: <b><span style="color: red;">Current</span>; off</b></td>
 +
        <td>Includes Acl0 Current/Percent information in the GPS data sent to server.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
| TRB245 | TRB246 | TRB255 | TRB256 = <table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Signal</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Includes GSM signal strength information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio1</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio1 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Dio2</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Dio2 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Adc0</td>
 +
        <td>off {{!}} on; default: <b>off</b></td>
 +
        <td>Includes Adc0 status information in the GPS data sent to server.</td>
 +
    </tr>
 +
</table>}}
    
==AVL I/O==
 
==AVL I/O==
    
The <b>AVL I/O</b> tab provides you with the possibility to configure input rules.
 
The <b>AVL I/O</b> tab provides you with the possibility to configure input rules.
−
{{#ifeq: {{{analog}}} | 1 |
  −
===Check Analog===
  −
----
  −
The <b>Check Analog</b> section is used to set how often the device checks the value of the analog input. This is relevant to input rules related to the analog input.
     −
[[File:Networking_rutos_manual_gps_avl_io_check_analog.png|border|class=tlt-border]]
  −
|}}
   
===Input Rules===
 
===Input Rules===
 
----
 
----
−
The <b>Input Rules</b> section displays existing input rules. To create a new input rule look to the section below (<i>AVL Input Configuration</i>), select input type, trigger and click the 'Add' button.
+
The <b>Input Rules</b> section displays existing input rules. To create a new input rule click the 'Add' button.
   −
[[File:Networking_rutos_manual_gps_avl_io_input_rules_add_button_config_io_{{{config_io}}}.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_gps_avl_io_input_rules_add_button.png|border|class=tlt-border]]
    
After this you should be redirected to configuration page of the newly added rule, which should look similar to this:
 
After this you should be redirected to configuration page of the newly added rule, which should look similar to this:
   −
[[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration_config_io_{{{config_io}}}.png|border|class=tlt-border]]
+
{{#switch: {{{name}}}  
 +
| RUT955 | RUT956 | RUT906 = [[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration_rut955.png|border|class=tlt-border]]
 +
| TRB245 | TRB246 | TRB255 | TRB256 = [[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration_trb245.png|border|class=tlt-border]]
 +
| #default = [[File:Networking_rutos_manual_gps_avl_io_input_rules_avl_input_rule_data_configuration.png|border|class=tlt-border]]}}
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 599: Line 784:  
     <tr>
 
     <tr>
 
         <td>Input type</td>
 
         <td>Input type</td>
−
         <td>{{{input_types}}}; default: <b>{{#ifeq:{{{config_io}}}|1|Configurable Input/Output (3)|Input (3)}}</b></td>
+
         <td>{{#switch:{{{name}}}| RUT955|RUT956|RUT906 = <span style="color: red;">Analog Current Loop (6,9)</span> {{!}} <span style="color: blue;">Analog Input (6,9)</span> {{!}}  Input (3) {{!}} Digital Input (1) {{!}}  Isolated Input (2,7); default: <b>Analog Current Loop (6,9)</b>| TRB245|TRB246|TRB255|TRB256 = <span style="color: red;">Analog Input (11)</span> {{!}} Configurable Input/Output (2) {{!}} Configurable Input/Output (3) {{!}} Configurable Input/Output (4); default: <b>Analog Input (11)</b>| #default = Input (3); default: <b>Input (3)</b>}}</td>
−
         <td>Selects to which input the rule will apply.</td>
+
         <td>Select type on your own intended configuration.</td>
−
     </tr>{{#ifeq: {{{analog}}} | 1 |
+
     </tr>{{#switch:{{{name}}}| RUT955|RUT956|RUT906 =
 +
    <tr>
 +
        <td><span style="color: red;">ACL Property</span></td>
 +
        <td>Current {{!}} Percent; default: <b>Current</b></td>
 +
        <td>Select which property - ampere or percentage the condition listens to.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: red;">Min current</span></td>
 +
        <td>float [4..20]; default: <b>none</b></td>
 +
        <td>Specifies minimum current of the range. Values between 4-20mA.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: red;">Max current</span></td>
 +
        <td>float [4..20]; default: <b>none</b></td>
 +
        <td>Specifies maximum current of the range. Values between minimum-20mA.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: blue;">Min voltage</span></td>
 +
        <td>float [0..40]; default: <b>none</b></td>
 +
        <td>Specify minimum voltage range.</td>
 +
    </tr>
 +
        <tr>
 +
        <td><span style="color: blue;">Max voltage</span></td>
 +
        <td>float [0..40]; default: <b>none</b></td>
 +
        <td>Specify maximum voltage range.</td>
 +
    </tr>| TR245|TRB246|TRB255|TRB256 =   
 
     <tr>
 
     <tr>
 
         <td><span style="color: red;">Min voltage</span></td>
 
         <td><span style="color: red;">Min voltage</span></td>
 
         <td>float [0..40]; default: <b>none</b></td>
 
         <td>float [0..40]; default: <b>none</b></td>
−
         <td>Minimum analog input voltage range value that will trigger the rule.<br><b>Note:</b> this field is visible only when the selected 'Input type' is <i>Analog Input (11)</i>.</td>
+
         <td>Specify minimum voltage range.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td><span style="color: red;">Max voltage</span></td>
 
         <td><span style="color: red;">Max voltage</span></td>
 
         <td>float [0..40]; default: <b>none</b></td>
 
         <td>float [0..40]; default: <b>none</b></td>
−
         <td>Maximum analog input voltage range value that will trigger the rule.<br><b>Note:</b> this field is visible only when the selected 'Input type' is <i>Analog Input (11)</i>.</td>
+
         <td>Specify maximum voltage range.</td>
−
     </tr>|}}
+
     </tr>| #default =}}
 
     <tr>
 
     <tr>
 
         <td>Trigger</td>
 
         <td>Trigger</td>
−
         <td>{{#ifeq:{{{analog}}}|1|<span style="color: blue;">Configurable I/O:</span>|}} Input active | Input low | Both{{#ifeq:{{{analog}}}|1|<br><span style="color: red;">Analog Input:</span> Inside range {{!}} Outside range|}}; default: <b>Input active</b></td>
+
         <td>{{#switch:{{{name}}}| RUT955|RUT956|RUT906 = <span style="color: red;">Inside range</span> {{!}} <span style="color: red;">Outside range</span>; <span style="color: blue;">Inside range</span> {{!}} <span style="color: blue;">Outside range; </span> Input active {{!}} Input low {{!}} Both; default: <b><span style="color: red;">Inside range</span>; <span style="color: blue;">Inside range</span>; Input active</b>|TRB245|TRB246|TRB255|TRB256 = <span style="color: red;">Inside range</span> {{!}} <span style="color: red;">Outside range; </span> Input active {{!}} Input low {{!}} Both; default: <b><span style="color: red;">Inside range</span>; Input active</b>|#default = Input active {{!}} Input low {{!}} Both; default: <b>Input active</b>}}</td>
−
         <td>The event that will trigger the rule.</td>
+
         <td>{{#switch:{{{name}}}| RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB256=<span style="color: red;">Inside range - Input voltage falls in the specified region, Outside range - Input voltage drops out of the specified region</span>; Select trigger event for your own intended configuration.|#default = Select trigger event for your own intended configuration.}}</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Priority</td>
 
         <td>Priority</td>
−
         <td>Low | High; default: <b>Low</b></td>
+
         <td>Low | High | Panic | Security; default: <b>Low</b></td>
−
         <td>The rule's priority. Different priority settings add different flags to event packets, so they can be displayed differently in the receiving system. The device sends data of higher priority first. Priority levels from highest to lowest are as follows:
+
         <td>The rule's priority. Different priority settings add different flags to event packets, so they can be displayed differently in the receiving system. The device sends data of higher priority first.</td>
−
            <ol>
  −
                <!--<li>Panic</li>-->
  −
                <li>High</li>
  −
                <li>Low</li>
  −
            </ol>
  −
        </td>
   
     </tr>
 
     </tr>
 
</table>
 
</table>
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/110672...124070"