31,703
edits
Changes
Template:Networking rutos manual hotspot 2.0 (view source)
Revision as of 14:22, 15 February 2021
, 14:22, 15 February 2021no edit summary
<span style="color: red;><b>Note:</b> <u>this page is not yet finished.</u></span>
<span style="color: red;><b>Note:</b> <u>this page is missing some information.</u></span>
----
----
{{Template:Networking_rutos_manual_fw_disclosure
{{Template: Networking_rutos_manual_fw_disclosure
| fw_version = {{{series}}}_R_00.02.05
| fw_version = {{{series}}}_R_00.02.06.1
| series = {{{series}}}
| series = {{{series}}}
}}
}}
After this you should be redirected to the configuration page for that interface.
After this you should be redirected to the configuration page for that interface.
===Hotspot 2.0 Configuration===
===Hotspot 2.0 Configuration===
----
The main <b>configuration parameters</b> of a Hotspot 2.0 interface will be discussed in this section.
A <u>Hotspot 2.0 interface requires WPA2-EAP encryption</u>. You can configure it in the <i>Network → Wireless</i> page (click 'Edit' next to an interface and find the [[{{{name}}} Wireless#Wireless_Security|Wireless Security]] section).
[[File:Networking_rutos_manual_hotspot_2.0_wpa2-eap_setup.png|border|class=tlt-border]]
====General Setup====
====General Setup====
The <b>Connection Capability</b> section provides information on the status of commonly used communication protocols and ports. To add a new protocol/port configuration, click the 'Add' button.
The <b>Connection Capability</b> section provides information on the status of commonly used communication protocols and ports. To add a new protocol/port configuration, click the 'Add' button.
[[File:Networking_rutos_manual_hotspot_2.0_operator_connection_capability_add_button.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_hotspot_2.0_connection_capability_add_button.png|border|class=tlt-border]]
You should see a new entry appear in the Connection Capability list.
You should see a new entry appear in the Connection Capability list.
<td>Protocol</td>
<td>Protocol</td>
<td>ICMP | TCP | UDP; default: <b>ICMP</b></td>
<td>ICMP | TCP | UDP; default: <b>ICMP</b></td>
<td>.</td>
<td>Network protocol type.</td>
</tr>
</tr>
<tr>
<tr>
<td>Port Number</td>
<td>Port Number</td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>integer [0..65535]; default: <b>none</b></td>
<td>.</td>
<td>TCP/UDP port number.</td>
</tr>
</tr>
<tr>
<tr>
<td>Status</td>
<td>Status</td>
<td>Closed | Open | Unknown; default: <b>Closed</b></td>
<td>Closed | Open | Unknown; default: <b>Closed</b></td>
<td>.</td>
<td>Status to be displayed for the selected protocol/port combination.</td>
</tr>
</tr>
</table>
</table>
[[Category:{{{name}}} Services section]]
[[Category:{{{name}}} Services section]]
