37
edits
Changes
Template:Networking rutos manual input output (view source)
Revision as of 15:54, 4 March 2024
, 4 Marchno edit summary
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| series = {{{series}}}
| name = {{{name}}}
}}
}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>
<p style="color:red">Warning: From 7.0 version I/O parameters and controls have changed compared to {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier legacy versions.</p>|}}
<p style="color:red">Warning: From 7.0 version I/O parameters and controls have changed compared to {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier legacy versions.</p>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>
<p style="color:red">Warning: From 7.1 version I/O parameters and controls have changed compared to {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier legacy versions.</p>|}}
<p style="color:red">Warning: From 7.1 version I/O parameters and controls have changed compared to {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier legacy versions.</p>|}}
==Summary==
==Summary==
<li><b>1W</b> - 1-Wire protocol input/output.</li>
<li><b>1W</b> - 1-Wire protocol input/output.</li>
<li><b>⏚</b> - GND contact.</li>
<li><b>⏚</b> - GND contact.</li>
<li><b>''Note:''</b> input circuit components have tolerance of +-1%.</li>
</ul>
</ul>
| RUT955|RUT956 =<h3>Input/Output Connector Pinout</h3>
| RUT955|RUT956|RUT906 =<h3>Input/Output Connector Pinout</h3>
----
----
[[File:Networking_rut955_manual_input_output_input_output_connector_pinout_v3.png]]
[[File:Networking_rut955_manual_input_output_input_output_connector_pinout_v3.png]]
<li><b>DI</b><sub>1</sub> and <b>⏚</b><sub>1</sub> - Digital input (dry type):</li>
<li><b>DI</b><sub>1</sub> and <b>⏚</b><sub>1</sub> - Digital input (dry type):</li>
<ul>
<ul>
<li>0-1.2 V is detected as logical "0"</li>
<li>0-1.2 V is detected as logical "1"</li>
<li>1.8-3 V is detected as logical "1"</li>
<li>1.8-3 V is detected as logical "0"</li>
</ul>
</ul>
<li><b>DI</b><sub>2</sub> and <b>⏚</b><sub>2</sub> - Digital galvanically isolated input:</li>
<li><b>DI</b><sub>2</sub> and <b>⏚</b><sub>2</sub> - Digital galvanically isolated input:</li>
<li><b>⏚</b><sub>2</sub> - GND for <b>DI</b><sub>2</sub>.
<li><b>⏚</b><sub>2</sub> - GND for <b>DI</b><sub>2</sub>.
<li><b>⏚</b><sub>3</sub> - GND for <b>DO</b> pins.
<li><b>⏚</b><sub>3</sub> - GND for <b>DO</b> pins.
<li><b>''Note:''</b> input circuit components have tolerance of +-1%.</li>
</ul>
</ul>
----
----
{{#switch: {{{name}}}
{{#switch: {{{name}}}
| TRB141 = [[File:Networking_trb141_manual_input_output_status.png|border|class=tlt-border]]
| TRB141 = [[File:Networking_trb141_manual_input_output_status_v3.png|border|class=tlt-border]]
| RUT950 = [[File:Networking_RUT950_manual_input_output_status.png|border|class=tlt-border]]
| RUT950 = [[File:Networking_RUT950_manual_input_output_status.png|border|class=tlt-border]]
| RUT955 = [[File:Networking_RUT955_manual_input_output_status.png|border|class=tlt-border]]
| RUT955|RUT956|RUT906 = [[File:Networking_RUT955_manual_input_output_status_v3.png|border|class=tlt-border]]
| TRB245|TRB246|TRB255|TRB256 = [[File:Networking_trb2_manual_input_output_status_v3.png|border|class=tlt-border]]
| [[File:Networking_{{lc:{{{series}}}}}_manual_input_output_status.png|border|class=tlt-border]]
| [[File:Networking_{{lc:{{{series}}}}}_manual_input_output_status.png|border|class=tlt-border]]
}}
}}
You can invert an Input pin by clicking the on/off slider under the "Inversion" column or switch the state of an Output pin by clicking the on/off slider under the "State" column.
You can invert an Input pin by clicking the on/off slider under the "Inversion" column or switch the state of an Output pin by clicking the on/off slider under the "State" column.
{{#switch: {{{name}}}
| TRB141 = '''Note:''' When dry/wet input is not connected to anything - the state of level is undetermined.
| RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 = [[File:Networking_manual_input_output_status_formula.png|border|class=tlt-border]]
| RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 = '''Note:''' You can edit the adc/acl formula to customize values.
| #default =
}}
===Status from command line===
===Status from command line===
}}
}}
| #default = {{Template:Networking_{{lc:{{{series}}}}}_manual_input_output_status|name={{{name}}}}}
| #default = {{Template:Networking_{{lc:{{{series}}}}}_manual_input_output_status|name={{{name}}}}}
}}
{{#switch: {{{name}}}
| RUT300|RUT301|RUT360|TRB245|TRB246|TRB255|TRB140|TRB141|TRB142|TRB143|TRB145|TRB256 = '''Note:''' Changes of configurable pin type from output to input (and reverse) could causes the issues where the specific type was set in configurations. Make sure that configurations do not contradict one another.
| #default =
}}
}}
Enabling <b>Post/Get</b> provides the possibility to control the state of an output via HTTP POST/GET requests. The figure below is an example of the Auth Settings section of the Post/Get page. It is used to turn Post/Get requests on or off and to set authentication parameters.
Enabling <b>Post/Get</b> provides the possibility to control the state of an output via HTTP POST/GET requests. The figure below is an example of the Auth Settings section of the Post/Get page. It is used to turn Post/Get requests on or off and to set authentication parameters.
[[File:Networking_rutos_manual_input_output_post_get_auth_settings.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_input_output_post_get_auth_settings_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>off | on; default: <b>off</b></td>
<td>off | on; default: <b>off</b></td>
<td>Turns Post/Get on or off.</td>
<td>Turns Post/Get on or off.</td>
</tr>
<tr>
<td>Access</td>
<td>io_state | io_type | io_value; default: <b>io_state, io_type, io_value</b></td>
<td>Accessible methods. It is considered that all methods are allowed if this list is empty.</td>
</tr>
</tr>
<tr>
<tr>
</tr>
</tr>
</table>
</table>
<b>Note:</b> password fields are required to enable POST/GET funcionallity.
===Post/Get examples===
===Post/Get examples===
<tr>
<tr>
<td>Turn Output state to high</td> <!-- another ifeq to change ip subnet according to trb14x... -->
<td>Turn Output state to high</td> <!-- another ifeq to change ip subnet according to trb14x... -->
<td><nowiki>http://192.168.</nowiki>{{#ifeq:{{{series}}}|TRB1|2|1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|dio1}}<span style="color: #0054a6;"><b><nowiki>&state=on</nowiki></b></span></td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|dio1}}<span style="color: #0054a6;"><b><nowiki>&state=on</nowiki></b></span></td>
</tr>
</tr>
<tr>
<tr>
<td>Turn Output state to low after 5 seconds for 3 seconds</td>
<td>Turn Output state to low after 5 seconds for 3 seconds</td>
<td><nowiki>http://192.168.</nowiki>{{#ifeq:{{{series}}}|TRB1|2|1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|dio1}}&state=on<span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_state</b></span><nowiki>?username=user1&password=user1&pin=</nowiki>{{#ifeq:{{{series}}}|RUTX|dout1|dio1}}&state=on<span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
</tr>
</tr>
<tr>
<tr>
<td>Change Configurable Input/Output with pin3 to Output</td>
<td>Change Configurable Input/Output with pin3 to Output</td>
<td><nowiki>http://192.168.</nowiki>{{#ifeq:{{{series}}}|TRB1|2|1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_type</b></span><nowiki>?username=user1&password=user1&</nowiki><span style="color: #0054a6;"><b>pin=dio0</b></span><span style="color: #3232ff;"><b><nowiki>&type=out</nowiki></b></span></td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_type</b></span><nowiki>?username=user1&password=user1&</nowiki><span style="color: #0054a6;"><b>pin=dio0</b></span><span style="color: #3232ff;"><b><nowiki>&type=out</nowiki></b></span></td>
</tr>
</tr>
|
|
<tr>
<tr>
<td>Turn Output state to high</td>
<td>Turn Output state to high</td>
<td><nowiki>http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1</nowiki><span style="color: #0054a6;"><b><nowiki>&state=on</nowiki></b></span></td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1<span style="color: #0054a6;"><b><nowiki>&state=on</nowiki></b></span></td>
</tr>
</tr>
<tr>
<tr>
<td>Turn Output state to low after 5 seconds for 3 seconds</td>
<td>Turn Output state to low after 5 seconds for 3 seconds</td>
<td><nowiki>http://192.168.1.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on</nowiki><span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on<span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
</tr>
</tr>
}}
}}
<b>Overview</b>:
<b>Overview</b>:
<ul>
<ul>
<li>192.168.{{#ifeq:{{{series}}}|TRB1|2|1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>
<li>192.168.{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>
{{#ifeq:{{{configurableio}}}|1|<li>io_state or io_type - allows you to change IO state or type.</li>}}
{{#ifeq:{{{configurableio}}}|1|<li>io_state or io_type - allows you to change IO state or type.</li>}}
<li>username - login name from Post/Get configuration.</li>
<li>username - login name from Post/Get configuration.</li>
<b>Examples:</b>
<b>Examples:</b>
* <b>Switch output to High:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on</nowiki>"
* <b>Switch output to Low after delay:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=off&delay=5</nowiki>"
====Reading====
====Reading====
<b>Examples:</b>
<b>Examples:</b>
<ul>
{{#ifeq:{{{configurableio}}}|1|* {{#switch:{{{name}}}|TRB245|TRB246|TRB255|TRB256 = <b>Read state of Configurable Input/Output PIN2/PIN3/PIN4:</b>
{{#ifeq:{{{configurableio}}}|1|<li><b>Read state of Configurable Input/Output PIN3:</b><br><pre>curl -X GET "http://192.168.1.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0"</pre></li>|}}
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"
{{#ifeq:{{{analog}}}|1|<li><b>Read state of analog input (in voltage mode):</b><br><pre>curl -X GET "http://192.168.1.1/cgi-bin/io_value?username=user1&password=user1&pin=adc0"</pre></li>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"
<li><b>Read state of analog input (in current mode):</b><br><pre>curl -X GET "http://192.168.1.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0"</pre></li>|}}
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio2</nowiki>" | #default = <b>Read state of Configurable Input/Output PIN3/PIN4:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"
</ul>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"}}|
* <b>Read state of digital input/output:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din1</nowiki>"
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1</nowiki>"}}
{{#ifeq:{{{analog}}}|1|* <b>Read state of analog input (in voltage mode):</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=adc0</nowiki>"|}}
{{#ifeq:{{{acl}}}|1|* <b>Read state of analog input (in current mode):</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0</nowiki>"|}}
{{#ifeq:{{{dry}}}|1|* <b>Read state of Dry input PIN1:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi0</nowiki>"|}}
{{#ifeq:{{{wet}}}|1|* <b>Read state of Wet input PIN2:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi1</nowiki>"|}}
{{#ifeq:{{{isolated}}}|1|* <b>Read state of Isolated input:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=iio</nowiki>"|}}
{{#ifeq:{{{onewire}}}|1|* <b>Read state of One Wire:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=onewire</nowiki>"|}}
{{#ifeq:{{{relay}}}|1|* <b>Read state of Relay:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay0</nowiki>"|}}
{{#ifeq:{{{latchingrelay}}}|1|* <b>Read state of Latching Relay:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay1</nowiki>"|}}
{{#ifeq:{{{galvanic}}}|1|* <b>Read state of Galvanically isolated open collector output:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout2</nowiki>"|}}
{{#ifeq:{{{digitalpassive}}}|1|* <b>Read state of Digital input (only for passive sensors):</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din2</nowiki>"|}}
==Scheduler==
==Scheduler==
The <b>I/O Juggler</b> is a feature that provides the possibility to create automated rules that perform certain actions based on Input state changes and other conditions. The operating sequence of I/O Juggler can be visualized as such:
The <b>I/O Juggler</b> is a feature that provides the possibility to create automated rules that perform certain actions based on Input state changes and other conditions. The operating sequence of I/O Juggler can be visualized as such:
[[File:Networking_rutos_manual_input_output_io_juggler_scheme_condition_mobile_{{{mobile}}}.png]]
[[File:Networking_rutos_manual_input_output_io_juggler_scheme_condition_mobile_{{{mobile}}}.png|border|class=tlt-border]]
When an Input Trigger occurs, the Input check to see if user-specified conditions are also met. If so, it executes a user-specified action.
When an Input Trigger occurs, the Input check to see if user-specified conditions are also met. If so, it executes a user-specified action.
Sends an email to specified recipients. Requires an existing email account configuration on the device. Email accounts can be configured in the System → Administration → Recipients → [[{{{name}}}_Administration#Email_Accounts|Email Accounts]] page.
Sends an email to specified recipients. Requires an existing email account configuration on the device. Email accounts can be configured in the System → Administration → Recipients → [[{{{name}}}_Administration#Email_Accounts|Email Accounts]] page.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_email.png|border|class=tlt-border]]
{{#switch: {{{name}}}
| RUTX12| RUTM12 = [[File:Networking rutos manual input output io juggler actions email rutx12 v2.png|border|class=tlt-border]]
| #default = [[File:Networking rutos manual input output io juggler actions email v2.png|border|class=tlt-border]]
}}
<table class="nd-mantable">
<table class="nd-mantable">
<td>positive integer; default: <b>none</b></td>
<td>positive integer; default: <b>none</b></td>
<td>A period of time (in seconds) which has to pass after a trigger event before the action is executed.</td>
<td>A period of time (in seconds) which has to pass after a trigger event before the action is executed.</td>
</tr>
</tr>{{#switch: {{{name}}}
| RUTX12| RUTM12 =
<tr>
<td>Modem</td>
<td>Primary modem {{!}} Secondary modem; default: <b>Primary modem</b></td>
<td>Modem, which is used to get information from.</td>
</tr>|}}
<tr>
<tr>
<td>Email account</td>
<td>Email account</td>
</tr>
</tr>
</table>
</table>
====Type: MQTT====
----
Executes a MQTT action.
[[File:Networking rutos manual input output io juggler actions mqtt.png|border|class=tlt-border]]
<table class="nd-mantable">
<tr>
<th>Field</th>
<th>Value</th>
<th>Description</th>
</tr>
<tr>
<td>Text message</td>
<td>string; default: <b>none</b> </td>
<td>Below this field you can find special codes that begin with the '%' sign. Each code represents a piece information related to the status of the device. Include these codes in the Text message for dynamic information reports.
</td>
</tr>
<tr>
<td>Topic</td>
<td>string; default: <b>none</b></td>
<td>The name of the topic that the broker will subscribe to.</td>
</tr>
<tr>
<td>Hostname</td>
<td>host | ip; default: <b>none</b> </td>
<td>Broker’s IP address or hostname.</td>
</tr>
<tr>
<td>Port</td>
<td>integer [0..65535]; default: <b>1883</b></td>
<td>Broker's port number.</td>
</tr>
<tr>
<td>Keepalive</td>
<td>positive integer; default: <b>none</b></td>
<td>The number of seconds after which the broker should send a PING message to the client if no other messages have been exchanged in that time</td>
</tr>
<tr>
<td>Qos</td>
<td>At most once (0) | At least once (1) | Exactly once (2); default: <b>At most once (0)</b></td>
<td>A period of time (in seconds) which has to pass after a trigger event before this Action is executed.</td>
</tr>
<tr>
<td>Username</td>
<td>string; default: <b>none</b></td>
<td>Username used for authentication to the Broker.</td>
</tr>
<tr>
<td>Password</td>
<td>string; default: <b>none</b></td>
<td>Password used for authentication to the Broker.</td>
</tr>
</table>
{{#ifeq: {{{dualsim}}} | 1 |
{{#ifeq: {{{dualsim}}} | 1 |
====Type: SIM switch====
====Type: SIM switch====
Switches to using the specified SIM card.
Switches to using the specified SIM card.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_change_sim.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_input_output_io_juggler_actions_change_sim_v2.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>off {{!}} on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>When set to 'on', switches to the opposite SIM card (the that is currently NOT in use). This can be used instead of selecting a specific SIM card to switch to.</td>
<td>When set to 'on', switches to the opposite SIM card (the that is currently NOT in use). This can be used instead of selecting a specific SIM card to switch to.</td>
</tr>
<tr>
<td>Enable primary option transfer</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Enables simd service to change primary card while switching sims </td>
</tr>
</tr>
<tr>
<tr>
</table>
</table>
|}}
|}}
===Conditions===
===Conditions===
----
----
