7,851
edits
Changes
Template:Networking rutos manual input output (view source)
Revision as of 09:33, 23 April 2024
, 23 Aprilno edit summary
{{Template: Networking_rutos_manual_fw_disclosure
{{Template: Networking_device_manual_fw_disclosure
| fw_version ={{Template: Networking_rutos_manual_latest_fw
| series = {{{series}}}
| name = {{{name}}}
| fw_version ={{Template: Networking_device_manual_latest_fw
| series = {{{series}}}
| series = {{{series}}}
| name = {{{name}}}
| name = {{{name}}}
}}
}}
}}
}}
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>
<p style="color:red">Warning: From 7.0 version I/O parameters and controls have changed compared to {{Template: Networking_rutos_manual_latest_fw | series = RUT9XX}} and earlier legacy versions.</p>|}}
<p style="color:red">Warning: From 7.0 version I/O parameters and controls have changed compared to {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier legacy versions.</p>|}}
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Input/Output (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>
<p style="color:red">Warning: From 7.1 version I/O parameters and controls have changed compared to {{Template: Networking_rutos_manual_latest_fw | series = RUT2XX}} and earlier legacy versions.</p>|}}
<p style="color:red">Warning: From 7.1 version I/O parameters and controls have changed compared to {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier legacy versions.</p>|}}
==Summary==
==Summary==
{{#switch: {{{name}}}
{{#switch: {{{name}}}
| TRB141 = [[File:Networking_trb141_manual_input_output_status.png|border|class=tlt-border]]
| TRB141 = [[File:Networking_trb141_manual_input_output_status_v4.png|border|class=tlt-border]]
| RUT950 = [[File:Networking_RUT950_manual_input_output_status.png|border|class=tlt-border]]
| RUT955|RUT956|RUT906 = [[File:Networking_RUT955_manual_input_output_status_v4.png|border|class=tlt-border]]
| RUT955|RUT956|RUT906 = [[File:Networking_RUT955_manual_input_output_status.png|border|class=tlt-border]]
| TRB245|TRB246|TRB255|TRB256 = [[File:Networking_trb2_manual_input_output_status_v3.png|border|class=tlt-border]]
| [[File:Networking_{{lc:{{{series}}}}}_manual_input_output_status.png|border|class=tlt-border]]
| [[File:Networking_{{lc:{{{series}}}}}_manual_input_output_status.png|border|class=tlt-border]]
}}
}}
{{#switch: {{{name}}}
{{#switch: {{{name}}}
| TRB141 = '''Note:''' When dry/wet input is not connected to anything - the state of level is undetermined.
| TRB141 = '''Note:''' When dry/wet input is not connected to anything - the state of level is undetermined.
| #default =}}
{{#switch: {{{name}}}
| RUT955|RUT956|RUT906|TRB245|TRB246|TRB255|TRB141|TRB256 =
'''Note:''' You can edit the adc/acl formula to customize values.
Custom I/O status labels for "Analog input":
[[File:Networking_manual_input_output_status_formula_adc0.png|border|class=tlt-border]]
Custom I/O status labels for "Analog current loop":
[[File:Networking_manual_input_output_status_formula_acl0.png|border|class=tlt-border]]
| #default =
| #default =
}}
}}
}}
}}
{{#switch: {{{series}}}
{{#switch: {{{name}}}
| RUT300|RUT360|TRB245|TRB255|TRB140|TRB141|TRB142|TRB143|TRB145 = '''Note:''' Changes of configurable pin type from output to input (and reverse) could causes the issues where the specific type was set in configurations. Make sure that configurations do not contradict one another.
| RUT300|RUT301|RUT360|TRB245|TRB246|TRB255|TRB140|TRB141|TRB142|TRB143|TRB145|TRB256 = '''Note:''' Changes of configurable pin type from output to input (and reverse) could causes the issues where the specific type was set in configurations. Make sure that configurations do not contradict one another.
| #default =
| #default =
}}
}}
Enabling <b>Post/Get</b> provides the possibility to control the state of an output via HTTP POST/GET requests. The figure below is an example of the Auth Settings section of the Post/Get page. It is used to turn Post/Get requests on or off and to set authentication parameters.
Enabling <b>Post/Get</b> provides the possibility to control the state of an output via HTTP POST/GET requests. The figure below is an example of the Auth Settings section of the Post/Get page. It is used to turn Post/Get requests on or off and to set authentication parameters.
[[File:Networking_rutos_manual_input_output_post_get_auth_settings_v2.png|border|class=tlt-border]]
[[File:Networking_rutos_manual_input_output_post_get_auth_settings_v3.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>Enable</td>
<td>Enable</td>
<td>off | on; default: <b>off</b></td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Turns Post/Get on or off.</td>
<td>Turns Post/Get on or off.</td>
</tr>
</tr>
<tr>
<tr>
<td>Access</td>
<td>Access</td>
<td>io_state | io_type | io_value; default: <b>io_state, io_type, io_value</b></td>
<td>io_state {{!}} io_type {{!}} io_value {{!}} io_invert; default: <b>io_state, io_type, io_value, io_invert</b></td>
<td>Accessible methods. It is considered that all methods are allowed if this list is empty.</td>
<td>Accessible methods. It is considered that all methods are allowed if this list is empty.</td>
</tr>
</tr>
</tr>
</tr>
</table>
</table>
<b>Note:</b> password fields are required to enable POST/GET funcionallity.
===Post/Get examples===
===Post/Get examples===
<td>Change Configurable Input/Output with pin3 to Output</td>
<td>Change Configurable Input/Output with pin3 to Output</td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_type</b></span><nowiki>?username=user1&password=user1&</nowiki><span style="color: #0054a6;"><b>pin=dio0</b></span><span style="color: #3232ff;"><b><nowiki>&type=out</nowiki></b></span></td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/<span style="color: #0054a6;"><b>io_type</b></span><nowiki>?username=user1&password=user1&</nowiki><span style="color: #0054a6;"><b>pin=dio0</b></span><span style="color: #3232ff;"><b><nowiki>&type=out</nowiki></b></span></td>
</tr>
<tr>
<td>Invert configurable input</td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_invert?username=user1&password=user1&pin=<dio0/dio1{{#switch:{{{series}}}|TRB2|TRB2M=/dio2}}><span style="color: #0054a6;"><b><nowiki>&invert=<0/1> (0 - disable inversion/1 - enable inversion</nowiki></b></span></td>
</tr>
</tr>
|
|
<td>Turn Output state to low after 5 seconds for 3 seconds</td>
<td>Turn Output state to low after 5 seconds for 3 seconds</td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on<span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_state?username=user1&password=user1&pin=dout1&state=on<span style="color: #0054a6;"><b><nowiki>&delay=5</nowiki></b></span><span style="color: #3232ff;"><b><nowiki>&time=3</nowiki></b></span></td>
</tr>
<tr>
<td>Invert input</td>
<td><nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1/cgi-bin/io_invert?username=user1&password=user1&pin=din1<span style="color: #0054a6;"><b><nowiki>&invert=<0/1> (0 - disable inversion/1 - enable inversion</nowiki></b></span></td>
</tr>
</tr>
}}
}}
</table>
</table>
<ul>
<ul>
<li>192.168.{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>
<li>192.168.{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}.1 - device default LAN IP address; replace it in accordance with your own configuration.</li>
{{#ifeq:{{{configurableio}}}|1|<li>io_state or io_type - allows you to change IO state or type.</li>}}
{{#ifeq:{{{configurableio}}}|1|<li>io_state,io_type or io_invert- allows you to change IO state, type or invert cofigurable input.</li>}}
<li>username - login name from Post/Get configuration.</li>
<li>username - login name from Post/Get configuration.</li>
<li>password- password from Post/Get configuration.</li>
<li>password- password from Post/Get configuration.</li>
<li>state - turn Output on or off.</li>
<li>state - turn Output on or off.</li>
{{#ifeq:{{{configurableio}}}|1|<li>type - turn Configurable Input/Output to Input or Output.</li>}}
{{#ifeq:{{{configurableio}}}|1|<li>type - turn Configurable Input/Output to Input or Output.</li>}}
<li>invert - enables inversion on/off (only works with inputs).</li>
<li>delay - defines a delay (in seconds) after which the specified action will be performed.</li>
<li>delay - defines a delay (in seconds) after which the specified action will be performed.</li>
<li>time - defines a window of time during which the action will take place. For instance, if you post an <i>on</i> action while specifying <i>time=5</i>, the output will turn on and stay on for 5 seconds before turning off.</li>
<li>time - defines a window of time during which the action will take place. For instance, if you post an <i>on</i> action while specifying <i>time=5</i>, the output will turn on and stay on for 5 seconds before turning off.</li>
<b>Examples:</b>
<b>Examples:</b>
{{#ifeq:{{{configurableio}}}|1|* <b>Read state of Configurable Input/Output PIN3:</b>
{{#ifeq:{{{configurableio}}}|1|* {{#switch:{{{name}}}|TRB245|TRB246|TRB255|TRB256 = <b>Read state of Configurable Input/Output PIN2/PIN3/PIN4:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"|
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"
* <b>Read state of digital output:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio2</nowiki>" | #default = <b>Read state of Configurable Input/Output PIN3/PIN4:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio0</nowiki>"
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dio1</nowiki>"}}|
* <b>Read state of digital input/output:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din1</nowiki>"
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1</nowiki>"}}
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout1</nowiki>"}}
{{#ifeq:{{{analog}}}|1|* <b>Read state of analog input (in voltage mode):</b>
{{#ifeq:{{{analog}}}|1|* <b>Read state of analog input (in voltage mode):</b>
{{#ifeq:{{{acl}}}|1|* <b>Read state of analog input (in current mode):</b>
{{#ifeq:{{{acl}}}|1|* <b>Read state of analog input (in current mode):</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0</nowiki>"|}}
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=acl0</nowiki>"|}}
{{#ifeq:{{{dry}}}|1|* <b>Read state of Dry input PIN1:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi0</nowiki>"|}}
{{#ifeq:{{{wet}}}|1|* <b>Read state of Wet input PIN2:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dwi1</nowiki>"|}}
{{#ifeq:{{{isolated}}}|1|* <b>Read state of Isolated input:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=iio</nowiki>"|}}
{{#ifeq:{{{onewire}}}|1|* <b>Read state of One Wire:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=onewire</nowiki>"|}}
{{#ifeq:{{{relay}}}|1|* <b>Read state of Relay:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay0</nowiki>"|}}
{{#ifeq:{{{latchingrelay}}}|1|* <b>Read state of Latching Relay:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=relay1</nowiki>"|}}
{{#ifeq:{{{galvanic}}}|1|* <b>Read state of Galvanically isolated open collector output:</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=dout2</nowiki>"|}}
{{#ifeq:{{{digitalpassive}}}|1|* <b>Read state of Digital input (only for passive sensors):</b>
curl -X GET "<nowiki>http://192.168.</nowiki>{{#switch:{{{series}}}|TRB1|TRB5=2|#default=1}}<nowiki>.1/cgi-bin/io_value?username=user1&password=user1&pin=din2</nowiki>"|}}
==Scheduler==
==Scheduler==
The <b>I/O Juggler</b> is a feature that provides the possibility to create automated rules that perform certain actions based on Input state changes and other conditions. The operating sequence of I/O Juggler can be visualized as such:
The <b>I/O Juggler</b> is a feature that provides the possibility to create automated rules that perform certain actions based on Input state changes and other conditions. The operating sequence of I/O Juggler can be visualized as such:
[[File:Networking_rutos_manual_input_output_io_juggler_scheme_condition_mobile_{{{mobile}}}.png]]
[[File:Networking_rutos_manual_input_output_io_juggler_scheme_condition_mobile_{{{mobile}}}.png|border|class=tlt-border]]
When an Input Trigger occurs, the Input check to see if user-specified conditions are also met. If so, it executes a user-specified action.
When an Input Trigger occurs, the Input check to see if user-specified conditions are also met. If so, it executes a user-specified action.
Executes a MQTT action.
Executes a MQTT action.
[[File:Networking rutos manual input output io juggler actions mqtt.png|border|class=tlt-border]]
[[File:Networking rutos manual input output io juggler actions mqtt_v1.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<td>string; default: <b>none</b></td>
<td>string; default: <b>none</b></td>
<td>The name of the topic that the broker will subscribe to.</td>
<td>The name of the topic that the broker will subscribe to.</td>
</tr>
<tr>
<td>Client ID</td>
<td>string; default: <b>none</b></td>
<td>Client ID to send with the data. If empty, a random client ID will be generated.</td>
</tr>
</tr>
<tr>
<tr>
<td>string; default: <b>none</b></td>
<td>string; default: <b>none</b></td>
<td>Password used for authentication to the Broker.</td>
<td>Password used for authentication to the Broker.</td>
</tr>
<tr>
<td>TLS</td>
<td>off {{!}} <span style="color:blue">on</span>; default: <b>off</b></td>
<td>Select to enable TLS encryption.</td>
</tr>
<tr>
<td><span style="color:blue">TLS Type</span></td>
<td>Certificate based {{!}} Pre-Shared-Key based; default: <b>Certificate based</b></td>
<td>Type of TLS encryption.</td>
</tr>
<tr>
<td><span style="color:blue">Certificate based:</span>Allow insecure connection</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Allow not verifying server authenticity.</td>
</tr>
<tr>
<td><span style="color:blue">Certificate based:</span>Certificate files from device</td>
<td>off {{!}} on; default: <b>off</b></td>
<td>Choose this option if you want to select certificate files from device.</td>
</tr>
<tr>
<td><span style="color:blue">Certificate based:</span>CA file</td>
<td>.crt file; default: <b>none</b></td>
<td>Upload CA file.</td>
</tr>
<tr>
<td><span style="color:blue">Certificate based:</span>Certificate file</td>
<td>.crt file; default: <b>none</b></td>
<td>TLS client or server certificate file.</td>
</tr>
<tr>
<td><span style="color:blue">Certificate based:</span>Key file</td>
<td>.key file; default: <b>none</b></td>
<td>TLS client or server key file.</td>
</tr>
<tr>
<td><span style="color:blue">Pre-Shared-Key based:</span>Pre-Shared-Key</td>
<td>string; default: <b>none</b></td>
<td>The pre-shared-key in hex format with no leading “0x”.</td>
</tr>
<tr>
<td><span style="color:blue">Pre-Shared-Key based:</span>Identity</td>
<td>string; default: <b>none</b></td>
<td>Specify the Identity.</td>
</tr>
</tr>
</table>
</table>
