31,703
edits
Changes
Template:Networking rutos manual input output (view source)
Revision as of 14:53, 22 October 2020
, 14:53, 22 October 2020→I/O Juggler
</ol>
</ol>
----
----
Selecting conditions is optional. If there are set or configured I/O Juggler conditions, the operating sequence is as such:
You can specify multiple actions and multiple conditions for any I/O Juggler rule. Selecting conditions is optional. If there are no set or configured I/O Juggler conditions, the operating sequence is as such:
[[File:Networking_rutos_manual_input_output_io_juggler_scheme_mobile_{{{mobile}}}.png]]
[[File:Networking_rutos_manual_input_output_io_juggler_scheme_mobile_{{{mobile}}}.png]]
====Input====
====Input====
----
----
The <b>Input</b> is used to create Input Rules. An Input Rule is triggered by a user-specified input state change. When this trigger occurs, the device executes a specified command if certain specified conditions are met (conditions are optional).
[[File:Networking_rutx_manual_input_output_iojuggler_general_modify_v1.png]]
The Input list is empty by default. To create a new Input Rule, look to the Add Input section at the bottom of the page; select an input and click the 'Add' button:
[[File:Networking_rutos_manual_input_output_io_juggler_general_input_add_button_juggler_input_{{{juggler_input}}}.png|border|class=tlt-border]]
After this you will be redirected to the configuration page for the newly added Rule, which should look similar to this:
[[File:Networking_rutos_manual_input_output_io_juggler_general_input_configuration_juggler_input_{{{juggler_input}}}.png|border|class=tlt-border]]
<table class="nd-mantable">
<table class="nd-mantable">
<tr>
<tr>
<td>Enabled</td>
<td>Enabled</td>
<td>off {{!}} on; default: <b>off</b> </td>
<td>off | on; default: <b>off</b> </td>
<td>Changes current profile to specified one when action triggers.</td>
<td>Changes current profile to specified one when action triggers.</td>
</tr>
</tr>
<tr>
<tr>
<td>Trigger interval</td>
<td>Trigger interval</td>
<td>positive integer; default: <b>none</b></td>
<td>integer [0..99999999]; default: <b>1</b></td>
<td>Specifies what is the shortest amount of seconds between triggers.</td>
<td>The shortest amount of time (in seconds) between two triggers. If the input is triggered more than once in a time period shorter than the value specified in this field, the device will react to the first trigger.</td>
</tr>
</tr>
<tr>
<tr>
<td>Trigger</td>
<td>Trigger</td>
<td>Rising {{!}} Falling {{!}} Both; default: <b>Rising</b> </td>
<td>Rising | Falling | Both; default: <b>Rising</b> </td>
<td>Specifies on which trigger state this rule will be activated.</td>
<td>Input state change that will trigger this rule.</td>
</tr>
</tr>
<tr>
<tr>
<td>Add actions</td>
<td>Add actions</td>
<td>actions; default: <b>none</b> </td>
<td>i/o juggler action(s); default: <b>none</b> </td>
<td>Specifies actions which have to be met for rule to be executed. Actions are optional.</td>
<td>Actions that will be executed by this rule when the specified trigger and conditions (optional) occur.</td>
</tr>
</tr>
<tr>
<tr>
<td>Add conditions</td>
<td>Add conditions</td>
<td>conditions; default: <b>none</b> </td>
<td>i/o juggler conditions; default: <b>none</b> </td>
<td>Specifies conditions which have to be met for action to occur. Conditions are optional.</td>
<td>Conditions that have to be met for the rule to take action. Conditions are optional.</td>
</tr>
</tr>
</table>
</table>
===Actions===
===Actions===
----
----
The <b>Actions</b> section is used to manage existing and create new Actions that be executed by the I/O Juggler Rules. The figure below is an example of the Actions section, which is empty by default.
[[File:Networking_rutos_manual_input_output_io_juggler_actions_actions.png|border|class=tlt-border]]
To create a new Action, look to the Add an Action section at the bottom of the page; enter a custom name, select an action type and click the 'Add' button:
[[File:Networking_rutos_manual_input_output_io_juggler_actions_add_button.png|border|class=tlt-border]]
After this you will be redirected to the configuration page for the newly added Action, which should look similar to this (example for the 'Reboot' action only):
[[File:Networking_rutx_manual_input_output_iojuggler_actions_v1.png]]
[[File:Networking_rutos_manual_input_output_io_juggler_actions_configuration_reboot.png|border|class=tlt-border]]
====Modify action====
====Modify action====
