Changes

</ul>

</ul>

===Connector Pins===

===Input/Output Connector Pinout===

----

----

[[File:Networking_trb141_manual_I-O_socket_v1.png|345x345px|border|class=tlt-border]]

[[File:Networking_trb141_manual_input_output_input_output_connector_pinout.png]]

*'''DI1''' and '''DI2''' are DRY/WET configurable inputs. WET: 0-1.9 V is detected as logical "0", 1.9-3.8 V is detected as logical "1".  DRY: Logical "0" is detected when input is shorted to GND, otherwise  input is detected as logical "1".

*'''DI1''' and '''DI2''' are DRY/WET configurable inputs. WET: 0-1.9 V is detected as logical "0", 1.9-3.8 V is detected as logical "1".  DRY: Logical "0" is detected when input is shorted to GND, otherwise  input is detected as logical "1".

[[File:Networking_rutos_manual_input_output_power_socket_pinout_configurableio_{{{configurableio}}}.png]]

[[File:Networking_rutos_manual_input_output_power_socket_pinout_configurableio_{{{configurableio}}}.png]]

*'''Power''' pin: +9 ... +30 VDC positive power input.

*'''Ground''' pin: negative/ground connection from power supply.

    <li><b>Power</b>: 9-30 VDC positive (+).</li>

*'''I/0''' pins: programmable Input/Output pins (Open Collector output, max 30V or Digital input where 0-5 V is detected as logical "0", 8-40 V is detected as logical "1").

    <li><b>Ground</b>: negative/ground (-).</li>

    <li><b>I/O</b>: programmable input/output pins; can be set to:

            <li><i>open collector (OC) output;</i> max 30 V;</li>

            <li><i>digital input;</i> 0-5 V is detected as logical "0"; 8-40 V is detected as logical "1".</li>

}}

}}