Changes

Template:Networking rutos manual interfaces (view source)

Revision as of 09:55, 14 March 2023

5,791 bytes added ,  09:55, 14 March 2023
→‎DHCP Server: General Setup: updated DHCP server information and pictures.
Line 1: Line 1:  
{{Template: Networking_rutos_manual_fw_disclosure
 
{{Template: Networking_rutos_manual_fw_disclosure
−
| fw_version = {{{series}}}{{#ifeq:{{{name}}}|RUT241|M|}}_R_00.07.01
+
| fw_version ={{Template: Networking_rutos_manual_latest_fw
−
| series    = {{{series}}}
+
| series = {{{series}}}
 +
| name  = {{{name}}}
 +
}}
 
}}
 
}}
   Line 18: Line 20:  
The <b>Network Interfaces</b> section displays interfaces currently existing on this device.
 
The <b>Network Interfaces</b> section displays interfaces currently existing on this device.
   −
[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_{{{lan}}}_mobile_{{{mobile}}}_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}_wired_{{{wired}}}.png|border|class=tlt-border]]
+
{{#ifeq: {{{series}}} | TCR1 | [[File:Networking_rutos_manual_tcr1_interfaces_network_interfaces_v1.png|border|class=tlt-border]] |
 +
[[File:Networking_rutos_manual_interfaces_network_interfaces_lan_{{{lan}}}_mobile_{{{mobile}}}_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}_wired_{{{wired}}}_v1{{#ifeq:{{{series}}}|TRB5|_trb5|}}.png|border|class=tlt-border]]|}}
    
==Add Interface==
 
==Add Interface==
Line 81: Line 84:  
To begin configuring an interface, click the 'Edit' button on the right side of the interface:
 
To begin configuring an interface, click the 'Edit' button on the right side of the interface:
   −
[[File:Networking_rutos_manual_interfaces_network_interfaces_edit_button_lan_{{{lan}}}.png]]
+
[[File:Networking_rutos_manual_interfaces_network_interfaces_edit_button_lan_{{{lan}}}{{#ifeq:{{{series}}}|TRB5|_trb5|}}.png]]
    
===General Setup===
 
===General Setup===
Line 101: Line 104:  
     <tr>
 
     <tr>
 
       <td>IPv4 address</td>
 
       <td>IPv4 address</td>
−
       <td>ip4; default[for LAN]: <b>192.168.1.1</b></td>
+
       <td>ip4; default[for LAN]: <b>{{#switch:{{{series}}}|TRB1|TRB5=192.168.2.1|#default=192.168.1.1}}</b></td>
 
       <td>The IPv4 address interface of this interface. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
 
       <td>The IPv4 address interface of this interface. An IP address identifies a device on a network and allows it to communicate with other devices.</td>
 
     </tr>
 
     </tr>
Line 207: Line 210:  
The <b>Mobile</b> protocol is used to set up an interface which can establish a mobile WAN connection.
 
The <b>Mobile</b> protocol is used to set up an interface which can establish a mobile WAN connection.
    +
=====Mode: NAT=====
 +
----
 
[[File:Networking_rutos_manual_interfaces_interface_configuration_general_setup_mobile_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}.png|border|class=tlt-border]]
 
[[File:Networking_rutos_manual_interfaces_interface_configuration_general_setup_mobile_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}.png|border|class=tlt-border]]
   Line 221: Line 226:  
             <ul>
 
             <ul>
 
                 <li><b>NAT</b> - the mobile connection uses NAT (network address translation).</li>
 
                 <li><b>NAT</b> - the mobile connection uses NAT (network address translation).</li>
−
                 <li><span style="color: #1550bf;"><b>Bridge</b></span> - bridges the LTE data connection with LAN. The device assigns its WAN IP address to another device (first connected to LAN or specified with MAC address). Using Bridge mode will disable most of the device’s capabilities.</li>
+
                 <li><b>Bridge</b> - bridges the LTE data connection with LAN. The device assigns its WAN IP address to another device (first connected to LAN or specified with MAC address). Using Bridge mode will disable most of the device’s capabilities.</li>
−
                 <li><span style="color: cornflowerblue;"><b>Passthrough</b></span> - in this mode the {{{name}}} shares its WAN IP to a single LAN device (first connected to LAN or specified with MAC address). The LAN device will get WAN IP of {{{name}}} instead of LAN IP. Using Passthrough mode will disable most of the device’s capabilities.</li>
+
                <li><b>Passthrough</b> - in this mode the {{{name}}} shares its WAN IP to a single LAN device (first connected to LAN or specified with MAC address). The LAN device will get WAN IP of {{{name}}} instead of LAN IP. Using Passthrough mode will disable most of the device’s capabilities.</li>
 +
            </ul>
 +
        </td>
 +
    <tr>
 +
    <td>PDP Type</td>
 +
        <td>IPv4 <nowiki>|</nowiki> IPv6 <nowiki>|</nowiki> IPv4/IPv6; default: <b>IPv4</b></td>
 +
        <td>Specifies what of address will be requested from the operator.</td>
 +
    </tr>
 +
    </tr>{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 1 ||
 +
    <tr>
 +
    <td>SIM</td>
 +
        <td>SIM1 <nowiki>|</nowiki> SIM2; default: <b>SIM1</b></td>
 +
        <td>Selects which SIM slot will be used for this interface.</td>
 +
    </tr>}}|}}{{#ifeq: {{{dualmodem}}} | 1 |
 +
    <tr>
 +
    <td>Modem</td>
 +
        <td>Primary modem <nowiki>|</nowiki> Secondary modem; default: <b>Primary modem</b></td>
 +
        <td>Selects which modem will be used for this interface.</td>
 +
    </tr>|}}
 +
    <tr>
 +
    <td>Auto APN</td>
 +
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
 +
        <td>The Auto APN feature scans an internal Android APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
    <td>APN / Custom APN</td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>An APN Network Identifier cannot start with any of the following strings:
 +
            <ul>
 +
                <li>rac;</li>
 +
                <li>lac;</li>
 +
                <li>sgsn;</li>
 +
                <li>rnc;</li>
 +
            </ul>it cannot end in:
 +
            <ul>
 +
                <li>.gprs;</li>
 +
            </ul>and it cannot contain the asterisk symbol (<b>*</b>).
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
    <td>Authentication Type</td>
 +
        <td>NONE <nowiki>|</nowiki> PAP <nowiki>|</nowiki> CHAP; default: <b>NONE</b></td>
 +
        <td>Authentication method that your GSM carrier uses to authenticate new connections on its network. If you select PAP or CHAP, you will also be required to enter a username and password.</td>
 +
    </tr>
 +
</table>
 +
 
 +
=====Mode: Passthrough=====
 +
----
 +
[[File:Networking_rutos_manual_interfaces_interface_configuration_general_mobile_passthrough_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}_v2.png|border|class=tlt-border]]
 +
 
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Mode</td>
 +
      <td>NAT <nowiki>|</nowiki> Bridge <nowiki>|</nowiki> Passthrough; default: <b>NAT</b></td>
 +
      <td>Mobile connection operating mode.
 +
            <ul>
 +
                <li><b>NAT</b> - the mobile connection uses NAT (network address translation).</li>
 +
                <li><b>Bridge</b> - bridges the LTE data connection with LAN. The device assigns its WAN IP address to another device (first connected to LAN or specified with MAC address). Using Bridge mode will disable most of the device’s capabilities.</li>
 +
                 <li><b>Passthrough</b> - in this mode the {{{name}}} shares its WAN IP to a single LAN device (first connected to LAN or specified with MAC address). The LAN device will get WAN IP of {{{name}}} instead of LAN IP. Using Passthrough mode will disable most of the device’s capabilities.</li>
 
             </ul>
 
             </ul>
 
         </td>
 
         </td>
 +
    <tr>
 +
    <td>Subnet selection</td>
 +
        <td>Auto {{!}} P2P; default: <b>Auto</b></td>
 +
        <td>Subnet selection method.</td>
 +
    </tr>
 
     <tr>
 
     <tr>
 
     <td>PDP Type</td>
 
     <td>PDP Type</td>
Line 268: Line 342:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
    <td><span style="color: #1550bf;">Bridge</span> <nowiki>|</nowiki> <span style="color: cornflowerblue;">Passthrough</span>: MAC Address</td>
+
        <td>Disable DHCP</td>
 +
        <td>on <nowiki>|</nowiki> off; default: <b>on</b></td>
 +
        <td>Disables dynamic allocation of client addresses when toggled off</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Lease Time</td>
 +
        <td>integer; default: <b>1</b></td>
 +
        <td>Expiry time of leased address. The minimum value for hours is 1, the minimum value for minutes is 2 and the minimum value for seconds is 120</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Units</td>
 +
        <td>Hours <nowiki>|</nowiki> Minutes <nowiki>|</nowiki> Second; default: <b>Hours</b></td>
 +
        <td>Specifies the time measurement unit</td>
 +
    </tr>
 +
    <tr>
 +
    <td>MAC Address</td>
 
         <td>mac; default: <b>none</b></td>
 
         <td>mac; default: <b>none</b></td>
 
         <td>Specifies the MAC address of the device that will receive the mobile interface's IP address in Bridge or Passthrough mode.<br><b>Note:</b> this field only becomes visible when using Bridge or Passthrough mode.</td>
 
         <td>Specifies the MAC address of the device that will receive the mobile interface's IP address in Bridge or Passthrough mode.<br><b>Note:</b> this field only becomes visible when using Bridge or Passthrough mode.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
 +
 +
=====Mode: Bridge=====
 +
----
 +
[[File:Networking_rutos_manual_interfaces_interface_configuration_general_mobile_bridge_dualsim_{{{dualsim}}}_dualmodem_{{{dualmodem}}}_v2.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Mode</td>
 +
      <td>NAT {{!}} Bridge {{!}} Passthrough; default: <b>NAT</b></td>
 +
      <td>Mobile connection operating mode.
 +
            <ul>
 +
                <li><b>NAT</b> - the mobile connection uses NAT (network address translation).</li>
 +
                <li><b>Bridge</b> - bridges the LTE data connection with LAN. The device assigns its WAN IP address to another device (first connected to LAN or specified with MAC address). Using Bridge mode will disable most of the device’s capabilities.</li>
 +
                <li><b>Passthrough</b> - in this mode the {{{name}}} shares its WAN IP to a single LAN device (first connected to LAN or specified with MAC address). The LAN device will get WAN IP of {{{name}}} instead of LAN IP. Using Passthrough mode will disable most of the device’s capabilities.</li>
 +
            </ul>
 +
        </td>
 +
    <tr>
 +
    <td>Subnet selection</td>
 +
        <td>Auto {{!}} P2P; default: <b>Auto</b></td>
 +
        <td>Subnet selection method.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>PDP Type</td>
 +
        <td>IPv4 <nowiki>|</nowiki> IPv6 <nowiki>|</nowiki> IPv4/IPv6; default: <b>IPv4</b></td>
 +
        <td>Specifies what of address will be requested from the operator.</td>
 +
    </tr>{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 1 ||
 +
    <tr>
 +
    <td>SIM</td>
 +
        <td>SIM1 <nowiki>|</nowiki> SIM2; default: <b>SIM1</b></td>
 +
        <td>Selects which SIM slot will be used for this interface.</td>
 +
    </tr>}}|}}{{#ifeq: {{{dualmodem}}} | 1 |
 +
    <tr>
 +
    <td>Modem</td>
 +
        <td>Primary modem <nowiki>|</nowiki> Secondary modem; default: <b>Primary modem</b></td>
 +
        <td>Selects which modem will be used for this interface.</td>
 +
    </tr>|}}
 +
    <tr>
 +
    <td>Auto APN</td>
 +
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
 +
        <td>The Auto APN feature scans an internal Android APN database and selects an APN based on the SIM card's operator and country. If the first automatically selected APN doesn't work, it attempts to use the next existing APN from the database.
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
    <td>APN / Custom APN</td>
 +
        <td>string; default: <b>none</b></td>
 +
        <td>An Access Point Name (APN) is a gateway between a GSM, GPRS, 3G or 4G mobile network and another computer network. Depending on the contract, some operators may require you to use an APN just to complete the registration on a network. In other cases, APN is used to get special parameters from the operator (e.g., a [[Private_and_Public_IP_Addresses#Public_IP_address|public IP address]]) depending on the contract.<br>An APN Network Identifier cannot start with any of the following strings:
 +
            <ul>
 +
                <li>rac;</li>
 +
                <li>lac;</li>
 +
                <li>sgsn;</li>
 +
                <li>rnc;</li>
 +
            </ul>it cannot end in:
 +
            <ul>
 +
                <li>.gprs;</li>
 +
            </ul>and it cannot contain the asterisk symbol (<b>*</b>).
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
    <td>Authentication Type</td>
 +
        <td>NONE <nowiki>|</nowiki> PAP <nowiki>|</nowiki> CHAP; default: <b>NONE</b></td>
 +
        <td>Authentication method that your GSM carrier uses to authenticate new connections on its network. If you select PAP or CHAP, you will also be required to enter a username and password.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>MAC Address</td>
 +
        <td>mac; default: <b>none</b></td>
 +
        <td>Specifies the MAC address of the device that will receive the mobile interface's IP address in Bridge or Passthrough mode.<br><b>Note:</b> this field only becomes visible when using Bridge or Passthrough mode.</td>
 +
    </tr>
 +
</table>
 +
 
{{#switch: {{{series}}}
 
{{#switch: {{{series}}}
−
| TRB1 =
+
| TRB1|TRB5|RUT36X =  
−
| RUT30X =
  −
| RUT36X =
   
| TRB2 =  
 
| TRB2 =  
 
{{#ifeq: {{{name}}} | TRB245 |  
 
{{#ifeq: {{{name}}} | TRB245 |  
Line 299: Line 460:  
<b>Advanced Settings</b> information for <b>Static</b> protocol is provided in the table below.
 
<b>Advanced Settings</b> information for <b>Static</b> protocol is provided in the table below.
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_static.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_static_v3.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 306: Line 467:  
         <th>Value</th>
 
         <th>Value</th>
 
         <th>Description</th>
 
         <th>Description</th>
−
    </tr>
  −
    <tr>
  −
        <td>Bring up on boot</td>
  −
        <td>off | on; default: <b>on</b></td>
  −
        <td>Specifies whether the interface should be launched during the boot process. If set to <i>off</i>, the interface would have to be brought up manually after each boot.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 321: Line 477:  
         <td>off | on; default: <b>on</b></td>
 
         <td>off | on; default: <b>on</b></td>
 
         <td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
 
         <td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
−
    </tr>
  −
    <tr>
  −
        <td>Use broadcast flag</td>
  −
        <td>off | on; default: <b>off</b></td>
  −
        <td>Required for certain ISPs. For example, Charter with DOCSIS 3.</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Use default gateway</td>
  −
        <td>off | on; default: <b>on</b></td>
  −
        <td>When checked, creates a default route for the interface.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 336: Line 482:  
         <td>integer; default: <b>3</b></td>
 
         <td>integer; default: <b>3</b></td>
 
         <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td>
 
         <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td>
−
    </tr>
  −
    <tr>
  −
        <td>Use custom DNS servers</td>
  −
        <td>off | on; default: <b>on</b></td>
  −
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Client ID to send when requesting DHCP</td>
  −
        <td>string; default: <b>none</b></td>
  −
        <td>Client ID which will be sent when requesting a DHCP lease.</td>
  −
    </tr>
  −
    <tr>
  −
        <td>Vendor Class to send when requesting DHCP</td>
  −
        <td>string; default: <b>none</b></td>
  −
        <td>Vendor class which will be sent when requesting a DHCP lease.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 404: Line 535:  
<b>Advanced Settings</b> information for <i>DHCP</i> protocol is provided in the table below.
 
<b>Advanced Settings</b> information for <i>DHCP</i> protocol is provided in the table below.
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_dhcp_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_dhcp_v4.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 411: Line 542:  
         <th>Value</th>
 
         <th>Value</th>
 
         <th>Description</th>
 
         <th>Description</th>
−
    </tr>
  −
    <tr>
  −
        <td>Bring up on boot</td>
  −
        <td>off | on; default: <b>on</b></td>
  −
        <td>Specifies whether the interface should be launched during the boot process. If set to <i>off</i>, the interface would have to be brought up manually after each boot.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 426: Line 552:  
         <td>off | on; default: <b>off</b></td>
 
         <td>off | on; default: <b>off</b></td>
 
         <td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
 
         <td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
−
    </tr>
  −
    <tr>
  −
        <td>IP4table</td>
  −
        <td>integer [0..99999999]; default: <b>none</b></td>
  −
        <td>ID of the routing table in [[{{{name}}}_Routing#Routing_Tables|Routing tables]] page.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 441: Line 562:  
         <td>off | on; default: <b>on</b></td>
 
         <td>off | on; default: <b>on</b></td>
 
         <td>When checked, creates a default route for the interface.</td>
 
         <td>When checked, creates a default route for the interface.</td>
−
    </tr>
  −
    <tr>
  −
        <td>Use DNS servers advertised by peer</td>
  −
        <td><span style="color: #1550bf; font-weight: bold;">off</span> | on; default: <b>on</b></td>
  −
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
  −
    </tr>
  −
    <tr>
  −
        <td><span style="color: #1550bf;">Use custom DNS servers</span></td>
  −
        <td>off | on; default: <b>on</b></td>
  −
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 456: Line 567:  
         <td>integer; default: <b>none</b></td>
 
         <td>integer; default: <b>none</b></td>
 
         <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td>
 
         <td>A metric specifies the priority of the gateway. The lower the metric, the higher the priority (0 for highest priority).</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Use custom DNS servers</td>
 +
        <td>ip4; default: <b>none</b></td>
 +
        <td>Specifies custom DNS servers. If left empty, DNS servers advertised by peer are used. </td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 476: Line 592:  
         <td>integer [1..9200]; default: <b>none</b></td>
 
         <td>integer [1..9200]; default: <b>none</b></td>
 
         <td>Changes the interfaces allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
 
         <td>Changes the interfaces allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>IP4table</td>
 +
        <td>integer [0..99999999]; default: <b>none</b></td>
 +
        <td>ID of the routing table in [[{{{name}}}_Routing#Routing_Tables|Routing tables]] page.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 483: Line 604:  
<b>Advanced Settings</b> information for <i>DHCPv6</i> protocol is provided in the table below.
 
<b>Advanced Settings</b> information for <i>DHCPv6</i> protocol is provided in the table below.
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_dhcpv6_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_dhcpv6_v4.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 490: Line 611:  
         <th>Value</th>
 
         <th>Value</th>
 
         <th>Description</th>
 
         <th>Description</th>
−
    </tr>
  −
    <tr>
  −
        <td>Bring up on boot</td>
  −
        <td>off | on; default: <b>on</b></td>
  −
        <td>Specifies whether the interface should be launched during the boot process. If set to <i>off</i>, the interface would have to be brought up manually after each boot.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 505: Line 621:  
         <td>off | on; default: <b>off</b></td>
 
         <td>off | on; default: <b>off</b></td>
 
         <td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
 
         <td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
−
    </tr>
  −
    <tr>
  −
        <td>IP4table</td>
  −
        <td>integer [0..99999999]; default: <b>none</b></td>
  −
        <td>ID of the routing table in [[{{{name}}}_Routing#Routing_Tables|Routing tables]] page.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 517: Line 628:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Use DNS servers advertised by peer</td>
+
         <td>Use custom DNS servers</td>
−
         <td><span style="color: #1550bf; font-weight: bold;">off</span> | on; default: <b>on</b></td>
+
         <td>ip4; default: <b>none</b></td>
−
         <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
+
         <td>Specifies custom DNS servers. If left empty, DNS servers advertised by peer are used. </td>
−
    </tr>
  −
    <tr>
  −
        <td><span style="color: #1550bf;">Use custom DNS servers</span></td>
  −
        <td>off | on; default: <b>on</b></td>
  −
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 546: Line 652:  
         <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
 
         <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
 
     <tr>
 
     <tr>
 +
    <tr>
 +
        <td>IP4table</td>
 +
        <td>integer [0..99999999]; default: <b>none</b></td>
 +
        <td>ID of the routing table in [[{{{name}}}_Routing#Routing_Tables|Routing tables]] page.</td>
 +
    </tr>
 
</table>
 
</table>
   Line 552: Line 663:  
<b>Advanced Settings</b> information for <i>PPPoE</i> protocol is provided in the table below.
 
<b>Advanced Settings</b> information for <i>PPPoE</i> protocol is provided in the table below.
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_pppoe_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_pppoe_v5.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 559: Line 670:  
         <th>Value</th>
 
         <th>Value</th>
 
         <th>Description</th>
 
         <th>Description</th>
−
    </tr>
  −
    <tr>
  −
        <td>Bring up on boot</td>
  −
        <td>off | on; default: <b>on</b></td>
  −
        <td>Specifies whether the interface should be launched during the boot process. If set to <i>off</i>, the interface would have to be brought up manually after each boot.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 574: Line 680:  
         <td>off | on; default: <b>off</b></td>
 
         <td>off | on; default: <b>off</b></td>
 
         <td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
 
         <td>Specifies whether interface settings (IP, route, gateway) are assigned to the interface regardless of the link being active or only after the link has become active.</td>
−
    </tr>
  −
    <tr>
  −
        <td>IP4table</td>
  −
        <td>integer [0..99999999]; default: <b>none</b></td>
  −
        <td>ID of the routing table in [[{{{name}}}_Routing#Routing_Tables|Routing tables]] page.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 596: Line 697:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Use DNS servers advertised by peer</td>
+
         <td>Use custom DNS servers</td>
−
         <td><span style="color: #1550bf; font-weight: bold;">off</span> | on; default: <b>on</b></td>
+
        <td>ip4; default: <b>none</b></td>
−
         <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
+
        <td>Specifies custom DNS servers. If left empty, DNS servers advertised by peer are used. </td>
 +
    </tr>
 +
    <tr>
 +
         <td>VLAN tag value</td>
 +
        <td>integer [0..7]; default: <b>none</b></td>
 +
         <td>VLAN tag value.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td><span style="color: #1550bf;">Use custom DNS servers</span></td>
+
         <td>VLAN priority</td>
−
         <td>off | on; default: <b>on</b></td>
+
         <td>integer [0..4095]; default: <b>none</b></td>
−
         <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
+
         <td>VLAN priority.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 629: Line 735:  
         <td>integer [1..1500]; default: <b>none</b></td>
 
         <td>integer [1..1500]; default: <b>none</b></td>
 
         <td>Maximum Transmission Unit (MTU) – specifies the largest possible size of a data packet.</td>
 
         <td>Maximum Transmission Unit (MTU) – specifies the largest possible size of a data packet.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>IP4table</td>
 +
        <td>integer [0..99999999]; default: <b>none</b></td>
 +
        <td>ID of the routing table in [[{{{name}}}_Routing#Routing_Tables|Routing tables]] page.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 636: Line 747:  
<b>Advanced Settings</b> information for <i>Mobile</i> protocol is provided in the table below.
 
<b>Advanced Settings</b> information for <i>Mobile</i> protocol is provided in the table below.
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_mobile_dualsim_{{{dualsim}}}_v2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_advanced_settings_mobile_dualsim_{{{dualsim}}}_v5.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 643: Line 754:  
         <th>Value</th>
 
         <th>Value</th>
 
         <th>Description</th>
 
         <th>Description</th>
−
    </tr>
  −
    <tr>
  −
        <td>Bring up on boot</td>
  −
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
  −
        <td>Specifies whether the interface should be launched during the boot process. If set to <i>off</i>, the interface would have to be brought up manually after each boot.</td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 660: Line 766:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
        <td>IP4table</td>
+
         <td>Use custom DNS servers</td>
−
        <td>integer [0..99999999]; default: <b>none</b></td>
+
         <td>ip4; default: <b>none</b></td>
−
        <td>ID of the routing table in [[{{{name}}}_Routing#Routing_Tables|Routing tables]] page.</td>
+
         <td>Specifies custom DNS servers. If left empty, DNS servers advertised by peer are used. </td>
−
    </tr>
  −
    <tr>
  −
         <td>Use DNS servers advertised by peer</td>
  −
         <td><span style="color: #1550bf; font-weight: bold;">off</span> <nowiki>|</nowiki> on; default: <b>on</b></td>
  −
         <td>Specifies whether to use DNS servers obtained automatically or specified manually.</td>
  −
    </tr>
  −
    <tr>
  −
        <td><span style="color: #1550bf;">Use custom DNS servers</span></td>
  −
        <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
  −
        <td>Specifies whether to use DNS servers obtained automatically or specified manually.<br><b>Note:</b> this field only becomes visible when Use DNS servers advertised by peer is set to <i>off</i></td>
   
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 683: Line 779:  
         <td>integer [1..9200]; default: <b>none</b></td>
 
         <td>integer [1..9200]; default: <b>none</b></td>
 
         <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
 
         <td>Changes the interface's allowed maximum transmission unit (MTU) size. It is the largest size of a protocol data unit (PDU) that can be transmitted in a single network layer transaction.</td>
 +
    </tr>
 +
    <tr>
 +
        <td>IP4table</td>
 +
        <td>integer [0..99999999]; default: <b>none</b></td>
 +
        <td>ID of the routing table in [[{{{name}}}_Routing#Routing_Tables|Routing tables]] page.</td>
 
     </tr>
 
     </tr>
 
</table>|}}
 
</table>|}}
 +
 
===Physical Settings===
 
===Physical Settings===
 
----
 
----
 
The <b>Physical Settings</b> section is used to create associations with physical interfaces and bridge network interfaces.
 
The <b>Physical Settings</b> section is used to create associations with physical interfaces and bridge network interfaces.
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_physical_settings.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_physical_settings_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 699: Line 801:  
     <tr>
 
     <tr>
 
         <td>Bridge interfaces</td>
 
         <td>Bridge interfaces</td>
−
         <td>off | <span style="color: #1550bf; font-weight: bold;">on</span>; default: <b>off</b></td>
+
         <td>off | <span style="color: #1550bf; font-weight: bold;">on</span>; default: <b>on</b></td>
 
         <td>Bridges physical interfaces specified in this configuration.</td>
 
         <td>Bridges physical interfaces specified in this configuration.</td>
 
     </tr>
 
     </tr>
Line 706: Line 808:  
         <td>off | on; default: <b>off</b></td>
 
         <td>off | on; default: <b>off</b></td>
 
         <td>Turns the use of Spanning Tree Protocol (STP) for this interface on or off.<br><b>Note:</b> this field becomes visible when 'Bridge interfaces' is set to <i>on</i>.</td>
 
         <td>Turns the use of Spanning Tree Protocol (STP) for this interface on or off.<br><b>Note:</b> this field becomes visible when 'Bridge interfaces' is set to <i>on</i>.</td>
 +
    </tr>
 +
    <tr>
 +
        <td><span style="color: red;">Enable IGMP</span></td>
 +
        <td>off | on; default: <b>off</b></td>
 +
        <td>Enabless IGMP snooping on this bridge.<br><b>Note:</b> this field becomes visible when 'Bridge interfaces' is set to <i>on</i> and 'Protocol' is set to <i>PPPoE</i>.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 752: Line 859:  
The <b>General Setup</b> section is used to set up the main operating parameters of the DHCP server.
 
The <b>General Setup</b> section is used to set up the main operating parameters of the DHCP server.
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_dhcp_server_general_setup_lan_{{{lan}}}.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_dhcp_server_general_setup_lan_{{{lan}}}_v1.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 766: Line 873:  
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Start</td>
+
         <td>Start IP</td>
−
         <td>integer [1..255]; default: <b>100</b></td>
+
         <td>ip4; default: <b>{{#switch:{{{series}}}|TRB1|TRB5=192.168.2.100|#default=192.168.1.100}}</b></td>
−
         <td>The starting IP address value. e.g., if your device’s LAN IP is 192.168.1.1 and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [192.168.1.0..192.168.1.254] (192.168.1.255 is a special unavailable address). If the Start value is set to 100 then the DHCP server will only lease out addresses starting from 192.168.1.<b>100</b>.</td>
+
         <td>The starting IP address of the DHCP server IP address range. E.g., if your device’s LAN IP is {{#switch:{{{series}}}|TRB1|TRB5=192.168.2.1|#default=192.168.1.1}} and your subnet mask is 255.255.255.0 that means that in your network a valid IP address has to be in the range of [{{#switch:{{{series}}}|TRB1|TRB5=192.168.2.0|#default=192.168.1.0}}..{{#switch:{{{series}}}|TRB1|TRB5=192.168.2.254|#default=192.168.1.254}}] ({{#switch:{{{series}}}|TRB1|TRB5=192.168.2.255|#default=192.168.1.255}} is a special unavailable address). If the subnet of your LAN IP address changes, this value needs to be changed accordingly.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
         <td>Limit</td>
+
         <td>End IP</td>
−
         <td>integer [1..255]; default: <b>150</b></td>
+
         <td>ip4; default: <b>{{#switch:{{{series}}}|TRB1|TRB5=192.168.2.249|#default=192.168.1.249}}</b></td>
−
         <td>How many addresses the DHCP server can lease out. Continuing from the example above: if the start address is 192.168.1.100 and the server can lease out 150 addresses, available addresses will be from 192.168.1.<b>100</b> to 192.168.1.<b>249</b> (<i>100 + 150 – 1 = 249</i>; this is because the first address is inclusive).</td>
+
         <td>The ending IP address of the DHCP server IP address range. Continuing from the example above: if the start address is {{#switch:{{{series}}}|TRB1|TRB5=192.168.2.<b>100</b>|#default=192.168.1.<b>100</b>}} and the end address is {{#switch:{{{series}}}|TRB1|TRB5=192.168.2.<b>249</b>|#default=192.168.1.<b>249</b>}}, available addresses will be distributed from that range. If the subnet of your LAN IP address changes, this value needs to be changed accordingly.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
         <td>Lease time</td>
 
         <td>Lease time</td>
−
         <td>integer [1..999999]; default: <b>12</b></br>integer [2..999999]<span class="asterisk">*</span></br>integer [120..999999]<span class="asterisk">**</span></td>
+
         <td>integer [1..999999]; default: <b>12</b><br>integer [2..999999]<span class="asterisk">*</span><br>integer [120..999999]<span class="asterisk">**</span></td>
−
         <td>A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease).<br>The minimal amount of time that can be specified is 2 minutes.</br><span class="asterisk">*</span>If selected Units is Minutes.</br><span class="asterisk">**</span>If selected Units is seconds.</td>
+
         <td>A DHCP lease will expire after the amount of time specified in this field and the device that was using the lease will have to request a new one. However, if the device stays connected, its lease will be renewed after half of the specified amount of time passes (e.g., if lease time is 12 hours, then every 6 hours the device will ask the DHCP server to renew its lease).<br>The minimal amount of time that can be specified is 2 minutes.<br><span class="asterisk">*</span>If selected Units is Minutes.<br><span class="asterisk">**</span>If selected Units is seconds.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 795: Line 902:  
Refer to the table below for information on the <b>Advanced Settings</b> section.
 
Refer to the table below for information on the <b>Advanced Settings</b> section.
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_dhcp_server_advanced_settings.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_dhcp_server_advanced_settings_v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 822: Line 929:  
         <td>dhcp options; default: <b>none</b></td>
 
         <td>dhcp options; default: <b>none</b></td>
 
         <td>Additional options to be added to the DHCP server. For example with '26,1470' or 'option:mtu, 1470' you can assign an MTU value per DHCP. You can find more information on DHCP Options [https://technet.microsoft.com/en-us/library/cc958941.aspx here].</td>
 
         <td>Additional options to be added to the DHCP server. For example with '26,1470' or 'option:mtu, 1470' you can assign an MTU value per DHCP. You can find more information on DHCP Options [https://technet.microsoft.com/en-us/library/cc958941.aspx here].</td>
 +
    </tr>
 +
    <tr>
 +
        <td>Force DHCP options</td>
 +
        <td>off | on; default: <b>off</b></td>
 +
        <td>If enabled, DHCP options will be sent even if it's not requested.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
Line 974: Line 1,086:  
     </tr>
 
     </tr>
 
</table>
 
</table>
−
{{#ifeq: {{{mobile}}} | 1 |
+
{{#ifeq:{{{series}}}|TRB5||{{#ifeq: {{{mobile}}} | 1 |
 
===Mobile Data Limit===
 
===Mobile Data Limit===
 
----
 
----
Line 981: Line 1,093:  
<i>In order to view the Mobile Data Limit section, the interface <b>protocol must be set to Mobile</b>.</i>
 
<i>In order to view the Mobile Data Limit section, the interface <b>protocol must be set to Mobile</b>.</i>
   −
[[File:Networking_rutos_manual_interfaces_interface_configuration_mobile_mobile_data_limit.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_interfaces_interface_configuration_mobile_mobile_data_limit_v2.png|border|class=tlt-border]]
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 1,022: Line 1,134:  
         <td>phone number; default: <b>none</b></td>
 
         <td>phone number; default: <b>none</b></td>
 
         <td>Recipient's phone numbers.</td>
 
         <td>Recipient's phone numbers.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Data limit clear due</td>
 +
        <td><b>none</b></td>
 +
        <td>Display the date of the next automatic data limit clear.</td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
   −
<font size="-1"><i><span class="asterisk">*</span>Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur.</i></font>|}}
+
<font size="-1"><i><span class="asterisk">*</span>Your carrier's data usage accounting may differ. Teltonika is not liable should any accounting discrepancies occur.</i></font>|}}}}
    
[[Category:{{{name}}} Network section]]
 
[[Category:{{{name}}} Network section]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/84875...105187"

Navigation menu