Template:Networking rutos manual interfaces

Summary

The Interfaces page is used to to set up network interfaces.

This manual page provides an overview of the Users windows in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Network Interfaces

The Network Interfaces section displays currently

[[File:Networking_rutos_manual_interfaces_network_interfaces_modem_{{{modem}}}_v1.png|border|class=tlt-border]]

Interface configuration

This section provides information on network interface configuration. There are {{{no_of_if}}} major types of interfaces on the device:

• Ethernet LAN -
• Ethernet WAN -

Each types utilizes

	None	Static	DHCP	DHCPv6	PPPoE	Mobile
Ethernet LAN
Ethernet WAN

To begin configuring an interface, click the 'Edit' button on the right side of the interface:

LAN

---

General Setup

---

The General Setup section is

Field	Value	Description
Protocol	None | Static | DHCP | DHCPv6 | PPPoE | Mobile; defaults [for Eth LAN]: Static [for Eth WAN]: DHCP
IPv4 address	ip4; default[for LAN]: 192.168.1.1	The IPv4 address interface of this interface. An IP address identifies a device on a network and allows it to communicate with other devices.
IPv4 netmask	netmask; default[for LAN]: 255.255.255.0	The IPv4 netmask of this interface. A netmask is used to define how "large" a network is by specifying which part of the IP address denotes the network and which part denotes a device.
IPv4 gateway	ip4; default: none	The IPv4 gateway address used by this interface. An interface's default gateway is the default address through which all outgoing traffic is directed.
IPv4 broadcast	ip4; default: none	The IPv4 broadcast address used by this interface. IP broadcasts are used by BOOTP and DHCP clients to find and send requests to their respective servers.
DNS servers	ip4; default: none	DNS server addresses that this interface will use. If left empty, DNS servers are assigned automatically. To see what DNS servers are currently used, you can check the contents of the /tmp/resolv.conf.auto file.

---

---

Firewall Settings

---

---

---

---

---

Static Lease

---

Static Lease: Settings

---

Static Lease: Add Lease

---

---

Add Interface

The Add Interface section is used to create additional network interfaces. To create a new interface, simply enter a custom name for it and click the 'Add' button.

[[Category:{{{name}}} Services section]]