Line 1: |
Line 1: |
− | This page contains information the different types of LEDs and their behaviour on a {{{name}}} router. | + | This page contains information the different types of LEDs and their behaviour on a {{{name}}} device. |
− | | + | __TOC__ |
| ==Power LED== | | ==Power LED== |
| | | |
| The <b>power LED</b> is located on the bottom left corner of the front panel, just under the power connector. | | The <b>power LED</b> is located on the bottom left corner of the front panel, just under the power connector. |
| | | |
− | [[File:{{{file_power}}}]] | + | [[File:Networking_{{lc:{{{name}}}}}_manual_leds_power_led.png]] |
| | | |
− | It indicates whether the router is powered on or not | + | It indicates whether the device is powered on or not. |
| | | |
| <table class="nd-othertables_3"> | | <table class="nd-othertables_3"> |
Line 13: |
Line 13: |
| <th width=500>State</th> | | <th width=500>State</th> |
| <th width=500>Description</th> | | <th width=500>Description</th> |
− | </tr> | + | </tr>{{#ifeq: {{{power_leds}}} | 1 | |
| <tr> | | <tr> |
| <td>LED turned on</td> | | <td>LED turned on</td> |
− | <td>Router is powered on</td> | + | <td>Device is powered on.</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>LED turned off</td> | | <td>LED turned off</td> |
− | <td>Router is not powered on</td> | + | <td>Device is not powered on.</td> |
| + | </tr>| |
| + | <tr> |
| + | <td>M LED turned on</td> |
| + | <td>Device is powered over the Main power connector.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>M LED turned off</td> |
| + | <td>Device is not powered over the Main power connector..</td> |
| + | </tr> |
| + | <tr> |
| + | <td>R LED turned on</td> |
| + | <td>Device is powered over the Reserve power connector.</td> |
| </tr> | | </tr> |
− | </table> | + | <tr> |
− | | + | <td>R LED turned off</td> |
− | ==WiFi band LEDs==
| + | <td>Device is not powered over the Reserve power connector.</td> |
| + | </tr>}} |
| + | </table>{{#ifeq: {{{wifi}}} | 1 | <h2>WiFi band LEDs</h2> |
| | | |
− | The <b>WiFi band LEDs</b> are located at the bottom of the front panel of the router, to the left of the Ethernet ports. | + | The <b>WiFi band LEDs</b> are located at the bottom of the front panel of the device, to the left of the Ethernet ports. |
| | | |
− | [[File:{{{file_wifi}}}]] | + | [[File:Networking_{{lc:{{{name}}}}}_manual_leds_wifi_leds.png]] |
| | | |
| They display whether a WiFi Access Point (AP) is active on a specific band. | | They display whether a WiFi Access Point (AP) is active on a specific band. |
Line 38: |
Line 52: |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td>2.4 LED turned on</td> | + | <td>2.4 LED turned on.</td> |
− | <td>At least one 2.4 GHz Access Point is running</td> | + | <td>At least one 2.4 GHz Access Point is running.</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>2.4 LED turned off</td> | | <td>2.4 LED turned off</td> |
− | <td>No 2.4 GHz Access Points are running</td> | + | <td>No 2.4 GHz Access Points are running.</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>5 LED turned on</td> | | <td>5 LED turned on</td> |
− | <td>At least one 5 GHz Access Point is running</td> | + | <td>At least one 5 GHz Access Point is running.</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>5 LED turned off</td> | | <td>5 LED turned off</td> |
− | <td>No 5 GHz Access Points are running</td> | + | <td>No 5 GHz Access Points are running.</td> |
| </tr> | | </tr> |
− | </table> | + | </table>|}}{{#ifeq: {{{wan}}} | 1 | <h2>WAN type LEDs</h2> |
− | | |
− | ==WAN type LEDs==
| |
| | | |
| The <b>WAN type LEDs</b> are located at the top-right of the front panel. | | The <b>WAN type LEDs</b> are located at the top-right of the front panel. |
| | | |
− | [[File:{{{file_wan}}}]] | + | [[File:Networking_{{lc:{{{name}}}}}_manual_leds_wan_leds.png]] |
| | | |
| They indicate which type of Internet connection is currently active. | | They indicate which type of Internet connection is currently active. |
Line 83: |
Line 95: |
| <td>SIM2 LED off</td> | | <td>SIM2 LED off</td> |
| <td>A mobile data connection on SIM2 is inactive.</td> | | <td>A mobile data connection on SIM2 is inactive.</td> |
− | </tr> | + | </tr>{{#ifeq: {{{wifi}}} | 1 | |
| <tr> | | <tr> |
| <td>WiFi LED on</td> | | <td>WiFi LED on</td> |
Line 91: |
Line 103: |
| <td>WiFi LED off</td> | | <td>WiFi LED off</td> |
| <td>A WiFi data connection (WiFi WAN) is inactive.</td> | | <td>A WiFi data connection (WiFi WAN) is inactive.</td> |
− | </tr> | + | </tr>|}} |
| <tr> | | <tr> |
| <td>ETH LED on</td> | | <td>ETH LED on</td> |
Line 101: |
Line 113: |
| </tr> | | </tr> |
| </table> | | </table> |
| + | |}}{{#ifeq: {{{eth}}} | 1 | <h2>Ethernet port LEDs</h2> |
| | | |
− | ==Ethernet port LEDs==
| + | {{#ifeq: {{{eth_leds}}} | 1 | |
| + | The <b>Ethernet port LEDs</b> are located on the device's front panel, under each respective Ethernet port. |
| | | |
− | There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>.
| + | [[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png]] |
| | | |
− | [[File:{{{file_ethernet}}}]] | + | <table class="nd-othertables_3"> |
| + | <tr> |
| + | <th width=500>State</th> |
| + | <th width=500>Description</th> |
| + | </tr> |
| + | <tr> |
| + | <td>LED on</td> |
| + | <td>Operating as a 10/100 Mbps connection.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>LED off</td> |
| + | <td>No link established.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>LED blinking</td> |
| + | <td>Connection established and there is activity on this port (data being transferred).</td> |
| + | </tr><!-- |
| + | <tr> |
| + | <td>LEDs turn on and off in sequence on after the other</td> |
| + | <td>The device is in the Bootloader menu state.</td> |
| + | </tr>--> |
| + | </table> |
| + | |There are two <b>LEDs</b> located at the top of each <b>Ethernet port</b>. |
| + | |
| + | [[File:Networking_{{lc:{{{name}}}}}_manual_leds_ethernet_leds.png]] |
| | | |
| They provide information on the current states of the Ethernet ports. Each port has two LEDs: | | They provide information on the current states of the Ethernet ports. Each port has two LEDs: |
Line 124: |
Line 162: |
| <tr> | | <tr> |
| <td>LED on</td> | | <td>LED on</td> |
− | <td>A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred)</td> | + | <td>A data connection on the port is operational (cable plugged in, end device visible, no data is being transferred).</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>LED off</td> | | <td>LED off</td> |
− | <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card))</td> | + | <td>No data connection on the port is operational (no cable, bad cable or end device not visible for some other reason (such as damaged network card)).</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
| <td>LED blinking</td> | | <td>LED blinking</td> |
− | <td>Connection established and data is being transferred over this port</td> | + | <td>Connection established and data is being transferred over this port.</td> |
| </tr> | | </tr> |
| </table> | | </table> |
| + | }}|}}{{#ifeq: {{{mobile}}} | 1 | <h2>Mobile network type LEDs</h2> |
| | | |
− | ==Mobile network type LEDs==
| + | The <b>mobile network type LEDs</b> are located near the SIM card slot. |
− | | |
− | The <b>mobile network type LEDs</b> are located just above the first SIM holder. | |
| | | |
− | [[File:{{{file_net_type}}}]] | + | [[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_network_type_leds.png]] |
| | | |
| They display which type of Internet connection is currently active. | | They display which type of Internet connection is currently active. |
Line 148: |
Line 185: |
| <th width=500>Action</th> | | <th width=500>Action</th> |
| <th width=500>Description</th> | | <th width=500>Description</th> |
| + | </tr>{{#ifeq: {{{2g}}} | 1 | |
| + | <tr> |
| + | <td>2G LED turned on</td> |
| + | <td>Device is connected to a 2G network.</td> |
| + | </tr>|}} |
| + | <tr> |
| + | <td>3G LED turned on</td> |
| + | <td>Device is connected to a 3G network.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>4G LED turned on</td> |
| + | <td>Device is connected to a 4G network.</td> |
| + | </tr>{{#ifeq: {{{2g}}} | 1 | |
| + | <tr> |
| + | <td>2G blinking</td> |
| + | <td>Device is connected to a 2G network but hasn't received an IP address.</td> |
| + | </tr>|}} |
| + | <tr> |
| + | <td>3G blinking</td> |
| + | <td>Device is connected to a 3G network but hasn't received an IP address.</td> |
| + | </tr> |
| + | <tr> |
| + | <td>4G blinking</td> |
| + | <td>Device is connected to a 4G network but hasn't received an IP address.</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td></td> | + | <td>{{#ifeq:{{{2g}}}|1|2G,|}} 3G & 4G LEDs blinking at the same time every 500 ms</td> |
− | <td></td> | + | <td>No SIM card or incorrect PIN.</td> |
| </tr> | | </tr> |
| <tr> | | <tr> |
− | <td></td> | + | <td>{{#ifeq:{{{2g}}}|1|2G,|}} 3G & 4G LEDs turns on and off in a sequence one after the other</td> |
− | <td></td> | + | <td>The device is attempting to connect to a mobile network operator.</td> |
| </tr> | | </tr> |
| </table> | | </table> |
Line 161: |
Line 222: |
| ==Mobile signal strength indication LEDs== | | ==Mobile signal strength indication LEDs== |
| | | |
− | The <b>mobile signal strength indication LEDs</b> are located just above the second SIM holder. | + | The <b>mobile signal strength indication LEDs</b> are located near the SIM card slot. |
| | | |
− | [[File:{{{file_signal}}}]] | + | [[File:Networking_{{lc:{{{name}}}}}_manual_leds_mobile_signal_strength_leds.png]] |
| | | |
− | The number of lit up LEDs represents a different mobile signal strength value in dBm for the currently active SIM card. | + | The number of lit up LEDs represents a different mobile signal strength ([[RSSI]]) value in dBm. |
− | | + | {{#ifeq: {{{mobile_leds}}} | 3 | |
− | <table class="nd-othertables_3"> | + | <table class="nd-othertables_2"> |
| + | <tr> |
| + | <th style="width: 500px>No. of lit up LEDs</th> |
| + | <th style="width: 500px>Signal strength value</th> |
| + | </tr> |
| + | <tr> |
| + | <td>0</td> |
| + | <td>≤ -111 dBm </td> |
| + | </tr> |
| + | <tr> |
| + | <td>1</td> |
| + | <td>-110 dBm to -82 dBm</td> |
| + | </tr> |
| + | <tr> |
| + | <td>2</td> |
| + | <td>-81 dBm to -52 dBm</td> |
| + | </tr> |
| + | <tr> |
| + | <td>3</td> |
| + | <td>≥ -51 dBm</td> |
| + | </tr> |
| + | </table> |
| + | |<table class="nd-othertables_3"> |
| <tr> | | <tr> |
| <th width=500>No. of lit up LEDS</th> | | <th width=500>No. of lit up LEDS</th> |
Line 197: |
Line 280: |
| </tr> | | </tr> |
| </table> | | </table> |
| + | }}|}} |
| | | |
| [[Category:{{{name}}} Manual]] | | [[Category:{{{name}}} Manual]] |