Difference between revisions of "Template:Networking rutos manual mobile"

From Teltonika Networks Wiki
(68 intermediate revisions by 8 users not shown)
Line 1: Line 1:
−
{{Template: Networking_rutos_manual_fw_disclosure
+
{{Template: Networking_device_manual_fw_disclosure
−
| fw_version = {{{series}}}_R_00.07.00
+
| series = {{{series}}}
−
| series     = {{{series}}}
+
| name  = {{{name}}}
 +
| fw_version ={{Template: Networking_device_manual_latest_fw
 +
| series = {{{series}}}
 +
| name  = {{{name}}}
 +
}}
 
}}
 
}}
−
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version RUT9XX_R_00.06.08.3 and earlier) user manual page.</i>|}}
+
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT9XX}} and earlier) user manual page.</i>|}}
 +
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version {{Template: Networking_device_manual_latest_fw | series = RUT2XX}} and earlier) user manual page.</i>|}}
 
==Summary==
 
==Summary==
  
Line 17: Line 22:
  
 
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.
 
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.
−
 
−
===Operator settings===
 
−
----
 
−
The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist){{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}}
 
−
 
−
[[File:Networking_rutx12_manual_mobile_general_operator_settings_v1.png|border|class=tlt-border]]
 
−
 
−
<table class="nd-mantable">
 
−
    <tr>
 
−
        <th>Field</th>
 
−
      <th>Value</th>
 
−
      <th>Description</th>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Enable</td>
 
−
      <td>off | on; default: <b>off</b></td>
 
−
      <td>Enables Whitelist or Blacklist for specified operator list.</td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Mode</td>
 
−
      <td>Whitelist {{!}} Blacklist; default: <b>Whitelist</b></td>
 
−
      <td>Mode to be applied for operator list.<br>
 
−
            <ul>
 
−
                <li>Whitelist - only allow operators in list</li>
 
−
                <li>Blacklist - block all operators in list</li>
 
−
            </ul>
 
−
        </td>
 
−
    </tr>
 
−
    <tr>
 
−
      <td>Operator list</td>
 
−
      <td>operator list; default: <b>none</b></td>
 
−
      <td>A list of operators which can be configured in [[#Operators list|Operators List page]].</td>
 
−
    </tr>
 
−
</table>
 
  
 
===SIM card settings===
 
===SIM card settings===
Line 56: Line 27:
 
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
 
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
  
−
{{#ifeq: {{{dualmodem}}} | 1 |
+
{{#switch: {{{name}}}  
−
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings_dualmodem.png|border|class=tlt-border]] |
+
|#default = [[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v3.png|border|class=tlt-border]]
−
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings.png|border|class=tlt-border]]}}
+
|TRB255 = [[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_trb2.png|border|class=tlt-border]]
 +
|TRB256 = [[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_trb2m.png|border|class=tlt-border]]
 +
|RUTX50|TRB500 = [[File:Networking_rutos_manual_mobile_general_sim_card_settings_5g.png|border|class=tlt-border]]}}
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 75: Line 48:
 
       <td>off | on; default: <b>off</b></td>
 
       <td>off | on; default: <b>off</b></td>
 
       <td>Denies data connection on roaming conditions.</td>
 
       <td>Denies data connection on roaming conditions.</td>
−
     </tr>
+
     </tr>{{#switch:{{{name}}}|RUT230|TRB255|TRB256=|#default=
 +
    <tr>
 +
      <td>VoLTE</td>
 +
      <td>Auto {{!}} On {{!}} Off; default: <b>Auto</b></td>
 +
      <td>Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.</td>
 +
    </tr>}}
 
     <tr>
 
     <tr>
−
       <td>Service mode</td>
+
       <td>Network type</td>
−
       <td>Auto | {{#switch: {{{series}}}
+
       <td>{{#switch: {{{series}}}
−
| RUTX = 4G (LTE) only {{!}} 3G only
+
|RUTX = {{#switch: {{{name}}}
−
| TRB1 = 4G (LTE) only {{!}} 3G only {{!}} 2G only
+
        |RUTX50 = 5G/4G/3G auto {{!}} 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
−
| TRB2 = {{#switch: {{{name}}}
+
        |#default = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>}}
−
         | TRB245 = 4G (LTE) only {{!}} 3G only {{!}} 2G only
+
|TRB5 = 5G/4G/3G auto {{!}} 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>5G/4G/3G auto</b>
−
         | TRB255 = 4G (LTE) only {{!}} 2G only}}
+
|RUT36X|TCR1|RUT361 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>
−
}}; default: <b>Auto</b></td>
+
|TRB1|RUT9|RUT9M = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
 +
|RUT2M = {{#switch: {{{name}}}
 +
        |RUT241|RUT200 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
 +
        |RUT260 = 4G/3G auto {{!}} 4G only {{!}} 3G only; default: <b>4G/3G auto</b>}}
 +
|TRB2 = {{#switch: {{{name}}}
 +
         |TRB245 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>
 +
         |TRB255 = 4G/2G auto {{!}} 4G only {{!}} 2G only; default: <b>4G/2G auto</b>}}
 +
|TRB2M = {{#switch: {{{name}}}
 +
        |TRB246 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
 +
|RUT2 = {{#switch: {{{name}}}
 +
        |RUT230 = 3G/2G auto {{!}} 3G only {{!}} 2G only; default: <b>3G/2G auto</b>
 +
        |RUT240 = 4G/3G/2G auto {{!}} 3G/2G auto {{!}} 4G only {{!}} 3G only {{!}} 2G only; default: <b>4G/3G/2G auto</b>}}
 +
}}</td>
 
       <td>Network connection type preference.</td>
 
       <td>Network connection type preference.</td>
−
     </tr>{{#ifeq: {{{name}}} | TRB255 |
+
     </tr>{{#switch: {{{name}}} |TRB255|TRB256=
 
     <tr>
 
     <tr>
 
       <td>Network Category</td>
 
       <td>Network Category</td>
−
       <td>M1 only {{!}} NB only {{!}} Auto; default: <b>M1 only</b></td>
+
       <td>M1+NB auto {{!}} M1 only {{!}} NB only; default: <b>M1+NB auto</b></td>
−
       <td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Service mode is set to <i>4G (LTE) only</i>.</td>
+
       <td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Network type is set to <i>4G/2G auto {{!}} 4G only</i>.</td>
−
     </tr>|}}
+
     </tr>|#default=}}
 
     <tr>
 
     <tr>
 
       <td>PIN</td>
 
       <td>PIN</td>
 
       <td>integer [0000..99999999]; default: <b>none</b></td>
 
       <td>integer [0000..99999999]; default: <b>none</b></td>
 
       <td>SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in <b>flash</b> memory therefore it does not reset when default settings are restored.</td>
 
       <td>SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in <b>flash</b> memory therefore it does not reset when default settings are restored.</td>
−
     </tr>{{#ifeq: {{{series}}} | RUTX |
+
     </tr>{{#switch: {{{series}}} | RUTX | RUTM=
 
     <tr>
 
     <tr>
 
       <td>Band selection</td>
 
       <td>Band selection</td>
 
       <td>Auto {{!}} Manual; default: <b>Auto</b></td>
 
       <td>Auto {{!}} Manual; default: <b>Auto</b></td>
 
       <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td>
 
       <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td>
−
     </tr>|}}
+
     </tr>|#default=}}
 +
</table>
 +
 
 +
===Low signal reconnect===
 +
----
 +
The <b>Low signal reconnect</b> section is used to configure modem operator connection resetting based on signal strength {{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}}
 +
 
 +
[[File:Networking_rutos_manual_mobile_general_low_signal_reconnect_v1.png|border|class=tlt-border]]
 +
 
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Enable</td>
 +
      <td>off | on; default: <b>off</b></td>
 +
      <td>Enables Low signal reconnect.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Reset threshold</td>
 +
      <td>integer [-120..-50]; default: <b>none</b></td>
 +
      <td>Signal threshold in dB for the connection. When signal is under this value modem resets connection.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Reset timeout</td>
 +
      <td>integer [15..65535]; default: <b>600</b></td>
 +
      <td>Time for the device to wait in seconds before trying to reset the connection again.</td>
 +
    </tr>
 +
</table>
 +
 
 +
{{#switch: {{{name}}} | TRB256 = | TRB255 =
 +
===Operator settings===
 +
----
 +
The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist). This function has been removed on from <b>TRB255</b> since TRB2_R_00.07.05 release.
 +
| #default =
 +
===Operator settings===
 +
----
 +
The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist){{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}} Make note that <b>whitelist/blacklist function only works with auto mobile operator connection mode</b>. Mobile operator mode can be changed in Networks Operator [[{{{name}}}_Mobile#Network_operators|page]].
 +
 
 +
[[File:Networking_rutx12_manual_mobile_general_operator_settings_v1.png|border|class=tlt-border]]
 +
 
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Enable</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Enables Whitelist or Blacklist for specified operator list.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Mode</td>
 +
      <td>Whitelist {{!}} Blacklist; default: <b>Whitelist</b></td>
 +
      <td>Mode to be applied for operator list.<br>
 +
            <ul>
 +
                <li>Whitelist - only allow operators in list</li>
 +
                <li>Blacklist - block all operators in list</li>
 +
            </ul>
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
      <td>Operator list</td>
 +
      <td>operator list; default: <b>none</b></td>
 +
      <td>A list of operators which can be configured in [[#Operators list|Operators List page]].</td>
 +
    </tr>
 
</table>
 
</table>
 +
}}
  
 
===SMS limit settings===
 
===SMS limit settings===
Line 108: Line 167:
 
The <b>SMS Limit Settings</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.
 
The <b>SMS Limit Settings</b> section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.
  
−
[[File:Networking_rutos_manual_mobile_general_sms_limit_settings.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_general_sms_limit_settings_v3.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 130: Line 189:
 
       <td>Day | Week | Month; default: <b>Day</b></td>
 
       <td>Day | Week | Month; default: <b>Day</b></td>
 
       <td>Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.</td>
 
       <td>Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Start hour/day</td>
 +
      <td>0-23 / Monday - Sunday / 0-31; default: <b>0</b></td>
 +
      <td>Starting hour of the day / day of the week / day of the month for SMS limiting period.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>SMS sent / SMS limit</td>
 +
      <td> - </td>
 +
      <td>Displays number of sent SMS and set limit </td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 168: Line 237:
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
|}}{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |
+
|}}
−
<h2>SIM Switch</h2>
+
 
 +
===PIN/PUK lock notification===
 +
----
 +
If you set an invalid PIN/PUK code or insert a locked/blocked sim card, a side message will pop up with information that the sim card is locked or blocked.  Click 'Unlock Sim here` to open the modal window where you can enter the sim card PIN/PUK codes.
 +
 
 +
Side message where the sim is locked
 +
[[File:Networking_rutos_manual_mobile_general_pin.png|border|class=tlt-border]]
 +
 
 +
Side message where the sim is blocked
 +
[[File:Networking_rutos_manual_mobile_general_puk.png|border|class=tlt-border]]
 +
 
 +
[[File:Networking_rutos_manual_mobile_general_pin_puk.png|border|class=tlt-border]]
 +
 
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>PIN</td>
 +
      <td>4-8 positive numeric chars (positive number); default: <b>none</b></td>
 +
      <td>SIM card's PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user. PIN is saved in flash memory, it will be saved after device reset.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>PUK</td>
 +
      <td>8 positive numeric chars (positive number); default: <b>none</b></td>
 +
      <td>SIM PUK (Personal Unblocking Key) is a code consisting of 8 digits. It is used to unblock your SIM card when you entered 3 times a wrong PIN code</td>
 +
    </tr>
 +
</table>
 +
 
 +
{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |
 +
==SIM Switch==
  
 
The <b>SIM Switch</b> section provides you with the possibility to configure SIM switching rules, i.e., set up circumstances under which the device will perform a switch from using one SIM card to another. Refer to the figure and table below for information.
 
The <b>SIM Switch</b> section provides you with the possibility to configure SIM switching rules, i.e., set up circumstances under which the device will perform a switch from using one SIM card to another. Refer to the figure and table below for information.
  
−
[[File:Networking_rutos_manual_mobile_sim_switch.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_sim_switch_v1.png|border|class=tlt-border]]
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 188: Line 289:
 
     <tr>
 
     <tr>
 
       <td>Check interval</td>
 
       <td>Check interval</td>
−
       <td>integer [3..3600]; default: <b>10</b></td>
+
       <td>integer [3..3600]; default: <b>30</b></td>
 
       <td>The frequency (in seconds) at which the device will check for SIM switch conditions. If such a condition exists, the router will perform a SIM switch, if not - it will check for the same conditions again after the amount of time specified in this field passes.</td>
 
       <td>The frequency (in seconds) at which the device will check for SIM switch conditions. If such a condition exists, the router will perform a SIM switch, if not - it will check for the same conditions again after the amount of time specified in this field passes.</td>
 
     </tr>
 
     </tr>
 +
    <tr>
 
       <td>Attempts before SIM switch</td>
 
       <td>Attempts before SIM switch</td>
 
       <td>integer [1..10]; default: <b>3</b></td>
 
       <td>integer [1..10]; default: <b>3</b></td>
Line 196: Line 298:
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
−
       <td>On weak signal</td>
+
       <td>On weak signal<span style="color:red">*</span></td>
 
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Performs a SIM switch when the signal strength drops below a certain threshold.</td>
 
       <td>Performs a SIM switch when the signal strength drops below a certain threshold.</td>
 +
    </tr>
 +
    <tr>
 +
      <td><span style="color:red">*Signal strength (dBm)</span></td>
 +
      <td>integer [-120..-50]; default: <b>-90</b></td>
 +
      <td>Lowest signal's strength value (RSSI) in dBm below which a SIM card switch should occur. More information: [[RSSI|RSSI]]</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
Line 257: Line 364:
 
       <td>Indicates a time value (in minutes) after which the device will attempt to switch back to the primary SIM card.</td>
 
       <td>Indicates a time value (in minutes) after which the device will attempt to switch back to the primary SIM card.</td>
 
     </tr>
 
     </tr>
−
</table>|}} |}}
+
</table>|}}|}}
 +
 
 +
{{#ifeq: {{{name}}}|TRB255| |
 
==Network operators==
 
==Network operators==
 +
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}}|}}
  
−
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}} |}}
+
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualmodem.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
−
 
+
}}
−
[[File:Networking_rutos_manual_mobile_network_operators_{{{dualsim}}}_{{{dualmodem}}}.png|border|class=tlt-border]]
 
−
 
 
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 287: Line 395:
 
     <tr>
 
     <tr>
 
       <td>Connection mode</td>  
 
       <td>Connection mode</td>  
−
       <td>Auto | Manual; default: <b>Auto</b></td>
+
       <td>Auto {{!}} Manual {{!}} Manual-Auto; default: <b>Auto</b></td>
 
       <td>Operator selection method.
 
       <td>Operator selection method.
 
             <ul>
 
             <ul>
 
                 <li><b>Auto</b> - selects the operator automatically.</li>
 
                 <li><b>Auto</b> - selects the operator automatically.</li>
 
                 <li><b>Manual</b> - requires you to select the operator manually. (More on this selection [[#Manual_operator_selection|below]].)</li>
 
                 <li><b>Manual</b> - requires you to select the operator manually. (More on this selection [[#Manual_operator_selection|below]].)</li>
 +
                <li><b>Manual-Auto</b> - prompts you to enter an operator's code, but if the router can't complete the connection, it will automatically connect to the next available operator.</li>
 
             </ul>
 
             </ul>
 
         </td>
 
         </td>
Line 301: Line 410:
 
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
 
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
  
−
[[File:Networking_rutos_manual_mobile_network_operators_scan_process_step_1_{{{dualsim}}}_{{{dualmodem}}}.png|border|class=tlt-border]]
+
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualmodem_v1.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]] }}
  
−
Will be prompted with a pop-up asking if you're sure. Click 'Yes' if you wish to proceed.
+
Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.
  
−
[[File:Networking_rutos_manual_mobile_network_operators_scan_process_step_2.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_2.png|border|class=tlt-border]]
  
 
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.
 
Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.
Line 311: Line 420:
 
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_3.png|border|class=tlt-border]]
 
[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_3.png|border|class=tlt-border]]
 
----
 
----
−
Once the scan has finished, you will see the results in the 'Operators List'.  
+
Once the scan has finished, you will see the results in the 'Available operators'.  
  
−
[[File:Networking_rutos_manual_mobile_network_operators_operators_list.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_operators_list_v1.png|border|class=tlt-border]]
  
−
In order to lock the SIM card to using a single operator, place a check mark next to the relevant entry in the list and click 'Save & Apply'.
+
In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'.
  
 
===Operators list===
 
===Operators list===
Line 322: Line 431:
 
to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).
 
to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).
  
−
[[File:Networking_rutos_manual_mobile_network_operators_list_management_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_list_management_v2.png|border|class=tlt-border]]
  
 
By clicking Edit [[File:Networking_rutx_manual_edit_button_v1.png]]  
 
By clicking Edit [[File:Networking_rutx_manual_edit_button_v1.png]]  
 
on a list you will be redirected to editing page in which you can enter operator codes for that list.
 
on a list you will be redirected to editing page in which you can enter operator codes for that list.
  
−
[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v1.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v2.png|border|class=tlt-border]]}}
 +
 
 +
==APN Database==
 +
 
 +
APN stands for Access Point Name and allows a device's network to connect to the internet. With the APN settings in place, your device builds a connection to a carrier's gateway. APN Database page section provides you with possibility to create/edit/delete APN records.
 +
<b>Note:</b> APN Database is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.
 +
 
 +
[[File:Network rutos mobile apn database.png|border|class=tlt-border]]
 +
 
 +
===Adding new APN===
 +
----
 +
In order to create new APN to database, insert required information and click Add button.
 +
 
 +
[[File:Network rutos mobile apn database add button.png|border|class=tlt-border]]
 +
 
 +
[[File:Network rutos mobile apn database entry configuration.png|border|class=tlt-border]]
 +
 
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Carrier name</td>
 +
      <td>default: <b>empty</b></td>
 +
      <td>Carrier name - name of a company that sells wireless connectivity to customers for cellphone data and telephone calls. It may also be called a mobile network operator, a mobile carrier, cellular company or wireless service provider. </td>
 +
    </tr> 
 +
    <tr>
 +
        <td>Mobile Country Code</td>
 +
      <td>default: <b>empty</b></td>
 +
      <td>Mobile Country Code (MCC) - a mobile code consisting of three digits used to identify GSM networks. MCC is also used along with the International Mobile Subscriber Identity (IMSI) to identify the region from which mobile subscriber belongs. </td>
 +
    </tr>
 +
    <tr>
 +
        <td>Mobile Network Code</td>
 +
      <td>default: <b>empty</b></td>
 +
      <td>Mobile Network Code (MNC) - a unique two- or three-digit number used to identify a home Public Land Mobile Network (PLMN) to. MNC is allocated by the national regulator. </td>
 +
    </tr> 
 +
    <tr>
 +
        <td>APN</td>
 +
      <td>default: <b>empty</b></td>
 +
      <td>APN (Access Point Name) is configurable network identifier used by a mobile device when connecting to a carrier </td>
 +
    </tr> 
 +
    <tr>
 +
        <td>PDP type</td>
 +
      <td>IPv4/IPv6 | IPv4 | IPv6; default: <b>IPv4/IPv6</b></td>
 +
      <td>Specifies what type of address is requested from the operator </td>
 +
    </tr> 
 +
    <tr>
 +
        <td>Authentication type</td>
 +
      <td>none | <span style="color:red">PAP</span> | <span style="color:red">CHAP</span>; default: <b>none</b></td>
 +
      <td>Authentication method that your GSM carrier uses to authenticate new connections on it's network </td>
 +
    </tr> 
 +
    <tr>
 +
        <td><span style="color:red">Username</span></td>
 +
      <td>default: <b>empty</b></td>
 +
      <td>Your username that you would use to connect to your GSM carrier's network </td>
 +
    </tr> 
 +
    <tr>
 +
        <td><span style="color:red">Password</span></td>
 +
      <td>default: <b>empty</b></td>
 +
      <td>Your password that you would use to connect to your GSM carrier's network </td>
 +
    </tr>
 +
</table>
 +
 
 +
{{#ifeq: {{{dualsim}}} | 1 |
 +
==SIM Idle Protection==
 +
Some operators block user SIM cards after a period of inactivity. The <b>SIM Idle Protection</b> tab provides you with the possibility to configure the router to periodically switch to the secondary SIM card and establish a data connection with a mobile network operator in order to break the idleness and prevent the SIM card from being blocked.
 +
 
 +
<b>Note:</b> SIM Idle Protection is additional software that can be installed from the <b>System → [[{{{name}}} Package Manager|Package Manager]]</b> page.
 +
 
 +
[[File:Networking_rutos_mobile_sim_idle_protection.png|border|class=tlt-border]]
 +
 
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Enable</td>
 +
      <td>off {{!}} on; default: <b>off</b></td>
 +
      <td>Turns SIM Idle Protection on or off.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Period</td>
 +
      <td>Month {{!}} Week; default: <b>Month</b></td>
 +
      <td>How often SIM Idle Protection will be performed. Use the two following fields ('Day' and 'Time') to set the exact time of the action.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Day</td>
 +
      <td>integer [1..30]; default: <b>1</b></td>
 +
      <td>TThe day of the month on which SIM SIM Idle Protection will be performed.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Time</td>
 +
      <td>hh:mm; default: <b>01:00</b></td>
 +
      <td>The time when SIM Idle Protection will be performed.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>IP type</td>
 +
      <td>IPv4 {{!}} IPv6; default: <b>IPv4</b></td>
 +
      <td>IP type to be used for ping.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Host to ping</td>
 +
      <td>ip; default: <b>8.8.8.8</b></td>
 +
      <td>IP address of a host that will be pinged during the SIM Idle Protection action.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Ping package size</td>
 +
        <td>integer [1..1000]; default: <b>56</b></td>
 +
        <td>ICMP packet size in bytes.</td>
 +
    </tr>
 +
    <tr>
 +
    <td>Ping requests</td>
 +
        <td>integer [1..30]; default: <b>2</b></td>
 +
        <td>How many ping requests will be sent.</td>
 +
    </tr>
 +
</table>|}}
  
 
[[Category:{{{name}}} Network section]]
 
[[Category:{{{name}}} Network section]]

Revision as of 12:43, 26 February 2024

The information in this page is updated in accordance with firmware version .


Summary

The Mobile page is used to configure mobile connection settings.

This manual page provides an overview of the Mobile page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

General

The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.

SIM card settings

The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.

[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v3.png|border|class=tlt-border]]

Field Value Description
Deny data roaming off | on; default: off Denies data connection on roaming conditions.
VoLTE Auto | On | Off; default: Auto Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.
Network type Network connection type preference.
PIN integer [0000..99999999]; default: none SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in flash memory therefore it does not reset when default settings are restored.

Low signal reconnect

The Low signal reconnect section is used to configure modem operator connection resetting based on signal strength .

Networking rutos manual mobile general low signal reconnect v1.png

Field Value Description
Enable off | on; default: off Enables Low signal reconnect.
Reset threshold integer [-120..-50]; default: none Signal threshold in dB for the connection. When signal is under this value modem resets connection.
Reset timeout integer [15..65535]; default: 600 Time for the device to wait in seconds before trying to reset the connection again.

Operator settings

The Operator Settings section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist). Make note that whitelist/blacklist function only works with auto mobile operator connection mode. Mobile operator mode can be changed in Networks Operator [[{{{name}}}_Mobile#Network_operators|page]].

Networking rutx12 manual mobile general operator settings v1.png

Field Value Description
Enable off | on; default: off Enables Whitelist or Blacklist for specified operator list.
Mode Whitelist | Blacklist; default: Whitelist Mode to be applied for operator list.
  • Whitelist - only allow operators in list
  • Blacklist - block all operators in list
Operator list operator list; default: none A list of operators which can be configured in Operators List page.

SMS limit settings

The SMS Limit Settings section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.

Networking rutos manual mobile general sms limit settings v3.png

Field Value Description
Enable SMS Limit off | on; default: off Turns SMS limiting on or off.
SMS limit count integer; default: none Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.
Period Day | Week | Month; default: Day Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.
Start hour/day 0-23 / Monday - Sunday / 0-31; default: 0 Starting hour of the day / day of the week / day of the month for SMS limiting period.
SMS sent / SMS limit - Displays number of sent SMS and set limit
Clear SMS Limit - (interactive button) Clears the SMS limit counter for the selected period.


PIN/PUK lock notification

If you set an invalid PIN/PUK code or insert a locked/blocked sim card, a side message will pop up with information that the sim card is locked or blocked. Click 'Unlock Sim here` to open the modal window where you can enter the sim card PIN/PUK codes.

Side message where the sim is locked Networking rutos manual mobile general pin.png

Side message where the sim is blocked Networking rutos manual mobile general puk.png

Networking rutos manual mobile general pin puk.png

Field Value Description
PIN 4-8 positive numeric chars (positive number); default: none SIM card's PIN (Personal Identification Number) is a secret numeric password shared between a user and a system that can be used to authenticate the user. PIN is saved in flash memory, it will be saved after device reset.
PUK 8 positive numeric chars (positive number); default: none SIM PUK (Personal Unblocking Key) is a code consisting of 8 digits. It is used to unblock your SIM card when you entered 3 times a wrong PIN code


Network operators

The Network operators section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to.

[[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]

Field Value Description
Current operator string; default: none Displays the name of the operator the which the device is currently connected.
Connection mode Auto | Manual | Manual-Auto; default: Auto Operator selection method.
  • Auto - selects the operator automatically.
  • Manual - requires you to select the operator manually. (More on this selection below.)
  • Manual-Auto - prompts you to enter an operator's code, but if the router can't complete the connection, it will automatically connect to the next available operator.

Manual operator selection

To select an operator manually, specify Connection mode: Manual and click 'Scan For Operators'.

[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]]

Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.

Networking rutos manual mobile network operators scan proccess step 2.png

Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.

Networking rutos manual mobile network operators scan proccess step 3.png

Once the scan has finished, you will see the results in the 'Available operators'.

Networking rutos manual mobile network operators operators list v1.png

In order to lock the SIM card to using a single operator, select operator from Operator code field and click 'Save & Apply'.

Operators list

This section is used to create lists of operators codes, which can then be used in Operator settings section to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).

Networking rutos manual mobile network operators list management v2.png

By clicking Edit Networking rutx manual edit button v1.png on a list you will be redirected to editing page in which you can enter operator codes for that list.

Networking rutos manual mobile network operators list edit v2.png

APN Database

APN stands for Access Point Name and allows a device's network to connect to the internet. With the APN settings in place, your device builds a connection to a carrier's gateway. APN Database page section provides you with possibility to create/edit/delete APN records. Note: APN Database is additional software that can be installed from the System → [[{{{name}}} Package Manager|Package Manager]] page.

Network rutos mobile apn database.png

Adding new APN

In order to create new APN to database, insert required information and click Add button.

Network rutos mobile apn database add button.png

Network rutos mobile apn database entry configuration.png

Field Value Description
Carrier name default: empty Carrier name - name of a company that sells wireless connectivity to customers for cellphone data and telephone calls. It may also be called a mobile network operator, a mobile carrier, cellular company or wireless service provider.
Mobile Country Code default: empty Mobile Country Code (MCC) - a mobile code consisting of three digits used to identify GSM networks. MCC is also used along with the International Mobile Subscriber Identity (IMSI) to identify the region from which mobile subscriber belongs.
Mobile Network Code default: empty Mobile Network Code (MNC) - a unique two- or three-digit number used to identify a home Public Land Mobile Network (PLMN) to. MNC is allocated by the national regulator.
APN default: empty APN (Access Point Name) is configurable network identifier used by a mobile device when connecting to a carrier
PDP type IPv4/IPv6 | IPv4 | IPv6; default: IPv4/IPv6 Specifies what type of address is requested from the operator
Authentication type none | PAP | CHAP; default: none Authentication method that your GSM carrier uses to authenticate new connections on it's network
Username default: empty Your username that you would use to connect to your GSM carrier's network
Password default: empty Your password that you would use to connect to your GSM carrier's network


[[Category:{{{name}}} Network section]]

Retrieved from "https://wiki.teltonika-networks.com/index.php?title=Template:Networking_rutos_manual_mobile&oldid=120888"