Changes

Template:Networking rutos manual mobile (view source)

Revision as of 14:38, 11 August 2021

3,874 bytes added ,  14:38, 11 August 2021
no edit summary
Line 1: Line 1: −
{{Template:Networking_rutos_manual_fw_disclosure
+
{{Template: Networking_rutos_manual_fw_disclosure
−
| fw_version = {{{series}}}_R_00.02.05
+
| fw_version = {{{series}}}_R_00.07.00
 
| series    = {{{series}}}
 
| series    = {{{series}}}
 
}}
 
}}
 +
{{#ifeq: {{{series}}} | RUT9 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version RUT9XX_R_00.06.08.3 and earlier) user manual page.</i>|}}
 +
{{#ifeq: {{{series}}} | RUT2 |<br><i><b>Note</b>: <b>[[{{{name}}} Mobile (legacy WebUI)|click here]]</b> for the old style WebUI (FW version RUT2XX_R_00.01.14.1 and earlier) user manual page.</i>|}}
 
==Summary==
 
==Summary==
   Line 16: Line 18:     
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.
 
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.
 +
 +
===Operator settings===
 +
----
 +
The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist){{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}}
 +
 +
[[File:Networking_rutx12_manual_mobile_general_operator_settings_v1.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Enable</td>
 +
      <td>off | on; default: <b>off</b></td>
 +
      <td>Enables Whitelist or Blacklist for specified operator list.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Mode</td>
 +
      <td>Whitelist {{!}} Blacklist; default: <b>Whitelist</b></td>
 +
      <td>Mode to be applied for operator list.<br>
 +
            <ul>
 +
                <li>Whitelist - only allow operators in list</li>
 +
                <li>Blacklist - block all operators in list</li>
 +
            </ul>
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
      <td>Operator list</td>
 +
      <td>operator list; default: <b>none</b></td>
 +
      <td>A list of operators which can be configured in [[#Operators list|Operators List page]].</td>
 +
    </tr>
 +
</table>
    
===SIM card settings===
 
===SIM card settings===
Line 21: Line 57:  
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
 
The <b>SIM Card Settings</b> section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.
   −
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings.png|border|class=tlt-border]]
+
{{#ifeq: {{{dualmodem}}} | 1 |
 +
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings_dualmodem.png|border|class=tlt-border]] |
 +
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings.png|border|class=tlt-border]]}}
    
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 28: Line 66:  
       <th>Value</th>
 
       <th>Value</th>
 
       <th>Description</th>
 
       <th>Description</th>
−
     </tr>{{#ifeq: {{{dualsim}}} | 1 |
+
     </tr>{{#ifeq: {{{dualmodem}}} | 0 | {{#ifeq: {{{dualsim}}} | 1 |
 
     <tr>
 
     <tr>
 
       <td>Default SIM</td>
 
       <td>Default SIM</td>
−
       <td>off <nowiki>|</nowiki> on; default: <b>on</b></td>
+
       <td>off {{!}} on; default: <b>on</b></td>
 
       <td>Sets this SIM slot as the default one.</td>
 
       <td>Sets this SIM slot as the default one.</td>
−
     </tr>|}}
+
     </tr>|}} |}}
 
     <tr>
 
     <tr>
 
       <td>Deny data roaming</td>
 
       <td>Deny data roaming</td>
Line 42: Line 80:  
       <td>Service mode</td>
 
       <td>Service mode</td>
 
       <td>Auto | {{#switch: {{{series}}}
 
       <td>Auto | {{#switch: {{{series}}}
−
| RUTX = 4G (LTE) only <nowiki>|</nowiki> 3G only
+
| RUTX = 4G (LTE) only {{!}} 3G only
−
| TRB1 = 4G (LTE) only <nowiki>|</nowiki> 3G only <nowiki>|</nowiki> 2G only
+
| TRB1 = 4G (LTE) only {{!}} 3G only {{!}} 2G only
 
| TRB2 = {{#switch: {{{name}}}
 
| TRB2 = {{#switch: {{{name}}}
−
         | TRB245 = 4G (LTE) only <nowiki>|</nowiki> 3G only <nowiki>|</nowiki> 2G only
+
         | TRB245 = 4G (LTE) only {{!}} 3G only {{!}} 2G only
−
         | TRB255 = 4G (LTE) only <nowiki>|</nowiki> 2G only}}
+
         | TRB255 = 4G (LTE) only {{!}} 2G only}}
 
}}; default: <b>Auto</b></td>
 
}}; default: <b>Auto</b></td>
 
       <td>Network connection type preference.</td>
 
       <td>Network connection type preference.</td>
Line 52: Line 90:  
     <tr>
 
     <tr>
 
       <td>Network Category</td>
 
       <td>Network Category</td>
−
       <td>M1 only | NB only | M1+NB only; default: <b>M1 only</b></td>
+
       <td>M1 only {{!}} NB only {{!}} Auto; default: <b>M1 only</b></td>
 
       <td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Service mode is set to <i>4G (LTE) only</i>.</td>
 
       <td>Selects LTE category preference.<br><b>Note:</b> this field only becomes visible when Service mode is set to <i>4G (LTE) only</i>.</td>
 
     </tr>|}}
 
     </tr>|}}
 
     <tr>
 
     <tr>
 
       <td>PIN</td>
 
       <td>PIN</td>
−
       <td>integer [0000..999999999999]; default: <b>none</b></td>
+
       <td>integer [0000..99999999]; default: <b>none</b></td>
−
       <td>SIM card's PIN (Personal Identification Number) is a secret numeric password used authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 12 symbols.</td>
+
       <td>SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in <b>flash</b> memory therefore it does not reset when default settings are restored.</td>
 
     </tr>{{#ifeq: {{{series}}} | RUTX |
 
     </tr>{{#ifeq: {{{series}}} | RUTX |
 
     <tr>
 
     <tr>
 
       <td>Band selection</td>
 
       <td>Band selection</td>
−
       <td>Auto <nowiki>|</nowiki> Manual; default: <b>Auto</b></td>
+
       <td>Auto {{!}} Manual; default: <b>Auto</b></td>
 
       <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td>
 
       <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td>
 
     </tr>|}}
 
     </tr>|}}
Line 131: Line 169:  
     </tr>
 
     </tr>
 
</table>
 
</table>
−
|}}{{#ifeq: {{{dualsim}}} | 1 |
+
|}}{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |
−
 
+
<h2>SIM Switch</h2>
−
<h2>SIM switch</h2>
      
The <b>SIM Switch</b> section provides you with the possibility to configure SIM switching rules, i.e., set up circumstances under which the device will perform a switch from using one SIM card to another. Refer to the figure and table below for information.
 
The <b>SIM Switch</b> section provides you with the possibility to configure SIM switching rules, i.e., set up circumstances under which the device will perform a switch from using one SIM card to another. Refer to the figure and table below for information.
Line 147: Line 184:  
     <tr>
 
     <tr>
 
       <td>Enable automatic switching</td>  
 
       <td>Enable automatic switching</td>  
−
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Turns automatic SIM switching on or off.</td>
 
       <td>Turns automatic SIM switching on or off.</td>
 
     </tr>
 
     </tr>
Line 161: Line 198:  
     <tr>
 
     <tr>
 
       <td>On weak signal</td>
 
       <td>On weak signal</td>
−
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Performs a SIM switch when the signal strength drops below a certain threshold.</td>
 
       <td>Performs a SIM switch when the signal strength drops below a certain threshold.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>On data limit</td>
 
       <td>On data limit</td>
−
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Performs a SIM switch when the mobile data limit for this SIM card is reached. You can set up a mobile data limit in the Network → [[{{{name}}} WAN|WAN]] (Basic WebUI mode) or Network → [[{{{name}}} Interfaces|Interfaces]] (Advanced WebUI mode) pages by clicking 'Edit' next to the interface you wish limit the data for.</td>
 
       <td>Performs a SIM switch when the mobile data limit for this SIM card is reached. You can set up a mobile data limit in the Network → [[{{{name}}} WAN|WAN]] (Basic WebUI mode) or Network → [[{{{name}}} Interfaces|Interfaces]] (Advanced WebUI mode) pages by clicking 'Edit' next to the interface you wish limit the data for.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>On SMS limit</td>
 
       <td>On SMS limit</td>
−
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Performs a SIM switch when the SMS limit for this SIM card is reached. You can set up SMS limit in the Network → Mobile → [[#General|General]] page.</td>
 
       <td>Performs a SIM switch when the SMS limit for this SIM card is reached. You can set up SMS limit in the Network → Mobile → [[#General|General]] page.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>On roaming</td>
 
       <td>On roaming</td>
−
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Performs a SIM switch when roaming conditions are detected.</td>
 
       <td>Performs a SIM switch when roaming conditions are detected.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>No network</td>
 
       <td>No network</td>
−
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Performs a SIM switch when a network connection is not available.</td>
 
       <td>Performs a SIM switch when a network connection is not available.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>On network denied</td>
 
       <td>On network denied</td>
−
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
 
       <td>Performs a SIM switch when access to a network is denied by an operator.</td>
 
       <td>Performs a SIM switch when access to a network is denied by an operator.</td>
 
     </tr>
 
     </tr>
 
     <tr>
 
     <tr>
 
       <td>On data connection fail</td>
 
       <td>On data connection fail</td>
−
       <td>off <nowiki>|</nowiki> on; default: <b>off</b></td>
+
       <td>off {{!}} on; default: <b>off</b></td>
−
       <td>Performs a SIM switch when mobile data connection fails.</td>
+
       <td>Performs a SIM switch when mobile data connection fails. Possible failure determination methods are:
 +
            <ul>
 +
                <li><b>LCP echo</b></li>
 +
                <li><b>ICMP echo</b></li>
 +
            </ul>If no echo is received, the data connection is considered to be down.
 +
        </td>
 
     </tr>
 
     </tr>
 
</table>
 
</table>
−
|}}
      +
When configuring SIM switching from the Secondary card, an additional field called "Switch back to primary SIM card after timeout" becomes available:
 +
 +
[[File:Networking_rutos_manual_mobile_sim_management_sim_switching_rules_back_to_primary.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Switch back to primary SIM card after timeout</td>
 +
      <td>yes {{!}} no; default: <b>no</b></td>
 +
      <td>Attempts to switch back to the primary SIM card once the specified period of time passed.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Initial timeout (min)</td>
 +
      <td>integer; default: <b>1</b></td>
 +
      <td>Indicates a time value (in minutes) after which the device will attempt to switch back to the primary SIM card.</td>
 +
    </tr>
 +
</table>|}} |}}
 
==Network operators==
 
==Network operators==
 +
{{#ifeq: {{{name}}}|TRB255| |
 +
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}} |}}
   −
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}}
+
[[File:Networking_rutos_manual_mobile_network_operators_{{{dualsim}}}_{{{dualmodem}}}.png|border|class=tlt-border]]
−
 
  −
[[File:Networking_rutos_manual_mobile_network_operators_{{{dualsim}}}.png|border|class=tlt-border]]
      
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 208: Line 270:  
       <th>Value</th>
 
       <th>Value</th>
 
       <th>Description</th>
 
       <th>Description</th>
−
     </tr>
+
     </tr>{{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |
 
     <tr>
 
     <tr>
 
       <td>Active SIM</td>  
 
       <td>Active SIM</td>  
−
       <td>SIM 1 <nowiki>|</nowiki> SIM 2; default: <b>SIM 1</b></td>
+
       <td>SIM 1 {{!}} SIM 2; default: <b>SIM 1</b></td>
 
       <td>Displays which SIM card is currently active.</td>
 
       <td>Displays which SIM card is currently active.</td>
−
     </tr>
+
     </tr>|
 +
    <tr>
 +
      <td>Modem</td>
 +
      <td>Primary modem {{!}} Secondary modem; default: <b>Primary modem</b></td>
 +
      <td>Operator scanning will be performed on the chosen modem.</td>
 +
    </tr>}} |}}
 
     <tr>
 
     <tr>
 
       <td>Current operator</td>  
 
       <td>Current operator</td>  
Line 221: Line 288:  
     <tr>
 
     <tr>
 
       <td>Connection mode</td>  
 
       <td>Connection mode</td>  
−
       <td>Auto | Manual; default: <b>Auto</b></td>
+
       <td>Auto {{!}} Manual; default: <b>Auto</b></td>
 
       <td>Operator selection method.
 
       <td>Operator selection method.
 
             <ul>
 
             <ul>
Line 233: Line 300:  
===Manual operator selection===
 
===Manual operator selection===
 
----
 
----
−
To select an operator manually, specify <b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
+
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
   −
[[File:Networking_rutos_manual_mobile_network_operators_scan_process_step_1_{{{dualsim}}}.png|border|class=tlt-border]]
+
[[File:Networking_rutos_manual_mobile_network_operators_scan_process_step_1_{{{dualsim}}}_{{{dualmodem}}}.png|border|class=tlt-border]]
    
Will be prompted with a pop-up asking if you're sure. Click 'Yes' if you wish to proceed.
 
Will be prompted with a pop-up asking if you're sure. Click 'Yes' if you wish to proceed.
Line 250: Line 317:     
In order to lock the SIM card to using a single operator, place a check mark next to the relevant entry in the list and click 'Save & Apply'.
 
In order to lock the SIM card to using a single operator, place a check mark next to the relevant entry in the list and click 'Save & Apply'.
 +
}}
 +
===Operators list===
 +
----
 +
This section is used to create lists of operators codes, which can then be used in [[#Operator settings|Operator settings section]]
 +
to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).
 +
 +
[[File:Networking_rutos_manual_mobile_network_operators_list_management_v1.png|border|class=tlt-border]]
 +
 +
By clicking Edit [[File:Networking_rutx_manual_edit_button_v1.png]]
 +
on a list you will be redirected to editing page in which you can enter operator codes for that list.
 +
 +
[[File:Networking_rutos_manual_mobile_network_operators_list_edit_v1.png|border|class=tlt-border]]
    
[[Category:{{{name}}} Network section]]
 
[[Category:{{{name}}} Network section]]
Retrieved from "https://wiki.teltonika-networks.com/view/Special:MobileDiff/71877...83712"

Navigation menu