Difference between revisions of "Template:Networking rutos manual mobile"

From Teltonika Networks Wiki
(4 intermediate revisions by the same user not shown)
Line 2: Line 2:
 
| fw_version ={{Template: Networking_rutos_manual_latest_fw
 
| fw_version ={{Template: Networking_rutos_manual_latest_fw
 
  | series = {{{series}}}
 
  | series = {{{series}}}
 +
| name  = {{{name}}}
 
  }}
 
  }}
 
}}
 
}}
Line 19: Line 20:
  
 
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.
 
The <b>General</b> section is used to configure SIM card parameters that define how the device will establish a mobile connection.
 
===Operator settings===
 
----
 
The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist){{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}}
 
 
[[File:Networking_rutx12_manual_mobile_general_operator_settings_v1.png|border|class=tlt-border]]
 
 
<table class="nd-mantable">
 
    <tr>
 
        <th>Field</th>
 
      <th>Value</th>
 
      <th>Description</th>
 
    </tr>
 
    <tr>
 
      <td>Enable</td>
 
      <td>off | on; default: <b>off</b></td>
 
      <td>Enables Whitelist or Blacklist for specified operator list.</td>
 
    </tr>
 
    <tr>
 
      <td>Mode</td>
 
      <td>Whitelist {{!}} Blacklist; default: <b>Whitelist</b></td>
 
      <td>Mode to be applied for operator list.<br>
 
            <ul>
 
                <li>Whitelist - only allow operators in list</li>
 
                <li>Blacklist - block all operators in list</li>
 
            </ul>
 
        </td>
 
    </tr>
 
    <tr>
 
      <td>Operator list</td>
 
      <td>operator list; default: <b>none</b></td>
 
      <td>A list of operators which can be configured in [[#Operators list|Operators List page]].</td>
 
    </tr>
 
</table>
 
  
 
===SIM card settings===
 
===SIM card settings===
Line 59: Line 26:
  
 
{{#ifeq: {{{dualmodem}}} | 1 |
 
{{#ifeq: {{{dualmodem}}} | 1 |
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings_dualmodem.png|border|class=tlt-border]] |
+
[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualmodem_v1.png|border|class=tlt-border]] |
[[File:Networking_{{lc:{{{series}}}}}_manual_mobile_general_sim_card_settings.png|border|class=tlt-border]]}}
+
[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]]}}
  
 
<table class="nd-mantable">
 
<table class="nd-mantable">
Line 77: Line 44:
 
       <td>off | on; default: <b>off</b></td>
 
       <td>off | on; default: <b>off</b></td>
 
       <td>Denies data connection on roaming conditions.</td>
 
       <td>Denies data connection on roaming conditions.</td>
     </tr>
+
     </tr>{{#ifeq:{{{name}}}|RUT230||
 +
    <tr>
 +
      <td>VoLTE</td>
 +
      <td>Auto {{!}} On {{!}} Off; default: <b>Auto</b></td>
 +
      <td>Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.</td>
 +
    </tr>}}
 
     <tr>
 
     <tr>
 
       <td>Service mode</td>
 
       <td>Service mode</td>
       <td>Auto | {{#switch: {{{series}}}
+
       <td>Auto | {{#ifeq:{{{5g}}}|1| 5G only {{!}} 4G only {{!}} 3G only {{!}} 5G + 4G {{!}} 5G + 3G {{!}} |}}{{#switch: {{{series}}}
| RUTX = 4G (LTE) only {{!}} 3G only
+
| RUTX|RUT36X|TCR1 = 4G (LTE) only {{!}} 3G only {{!}} 4G + 3G
| TRB1 = 4G (LTE) only {{!}} 3G only {{!}} 2G only
+
| TRB1|RUT9|RUT9M|RUT952|RUT2M = 4G (LTE) only {{!}} 3G only {{!}} 2G only {{!}} 4G + 3G {{!}} 4G + 2G
 
| TRB2 = {{#switch: {{{name}}}
 
| TRB2 = {{#switch: {{{name}}}
         | TRB245 = 4G (LTE) only {{!}} 3G only {{!}} 2G only
+
         | TRB245 = 4G (LTE) only {{!}} 3G only {{!}} 2G only {{!}} 4G + 3G {{!}} 4G + 2G
         | TRB255 = 4G (LTE) only {{!}} 2G only}}
+
         | TRB255 = 4G (LTE) only {{!}} 2G only {{!}} 4G + 2G}}
 +
| RUT2 = {{#switch: {{{name}}}
 +
        | RUT230 = 3G only {{!}} 2G only {{!}} 3G+2G
 +
        | RUT240 = 4G (LTE) only {{!}} 3G only {{!}} 2G only {{!}} 4G + 3G {{!}} 4G + 2G}}
 
}}; default: <b>Auto</b></td>
 
}}; default: <b>Auto</b></td>
 
       <td>Network connection type preference.</td>
 
       <td>Network connection type preference.</td>
Line 104: Line 79:
 
       <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td>
 
       <td>Network frequency band selection method. When set to <i>Auto</i>, the device connects to the band with the best connectivity conditions, while <i>Manual</i> provides the possibility to manually select the bands which the device will obliged to use.</td>
 
     </tr>|}}
 
     </tr>|}}
 +
</table>
 +
 +
===Operator settings===
 +
----
 +
The <b>Operator Settings</b> section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist){{#ifeq:{{{dualsim}}}|1|&nbsp;for specified SIM card.|.}}
 +
 +
[[File:Networking_rutx12_manual_mobile_general_operator_settings_v1.png|border|class=tlt-border]]
 +
 +
<table class="nd-mantable">
 +
    <tr>
 +
        <th>Field</th>
 +
      <th>Value</th>
 +
      <th>Description</th>
 +
    </tr>
 +
    <tr>
 +
      <td>Enable</td>
 +
      <td>off | on; default: <b>off</b></td>
 +
      <td>Enables Whitelist or Blacklist for specified operator list.</td>
 +
    </tr>
 +
    <tr>
 +
      <td>Mode</td>
 +
      <td>Whitelist {{!}} Blacklist; default: <b>Whitelist</b></td>
 +
      <td>Mode to be applied for operator list.<br>
 +
            <ul>
 +
                <li>Whitelist - only allow operators in list</li>
 +
                <li>Blacklist - block all operators in list</li>
 +
            </ul>
 +
        </td>
 +
    </tr>
 +
    <tr>
 +
      <td>Operator list</td>
 +
      <td>operator list; default: <b>none</b></td>
 +
      <td>A list of operators which can be configured in [[#Operators list|Operators List page]].</td>
 +
    </tr>
 
</table>
 
</table>
  
Line 270: Line 279:
 
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}} |}}
 
The <b>Network operators</b> section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to. {{#ifeq: {{{dualsim}}} | 1 | {{#ifeq: {{{dualmodem}}} | 0 |Operator selection is only available for the primary SIM card. In order to specify an operator for the other SIM card it must first be selected as the Primary SIM in the [[#SIM card settings|SIM card settings]] section.|}} |}}
  
{{#ifeq: {{{dualsim}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_singlesim.png|border|class=tlt-border]] |}}
+
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualmodem.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]
 
+
}}
 
<table class="nd-mantable">
 
<table class="nd-mantable">
 
     <tr>
 
     <tr>
Line 310: Line 319:
 
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
 
To select an operator manually, specify {{#ifeq: {{{dualmodem}}} | 1 |<b>Modem</b>,<nowiki> </nowiki>|}}<b>Connection mode: <i>Manual</i></b> and click <b>'Scan For Operators'</b>.
  
{{#ifeq: {{{dualsim}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_singlesim.png|border|class=tlt-border]] |}}
+
{{#ifeq: {{{dualmodem}}} | 1 | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualmodem_v1.png|border|class=tlt-border]] | [[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]] }}
  
 
Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.
 
Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.

Revision as of 11:11, 1 September 2022

Template:Networking rutos manual fw disclosure


Summary

The Mobile page is used to configure mobile connection settings.

This manual page provides an overview of the Mobile page in {{{name}}} devices.

If you're having trouble finding this page or some of the parameters described here on your device's WebUI, you should turn on "Advanced WebUI" mode. You can do that by clicking the "Advanced" button, located at the top of the WebUI.

Networking rutos manual webui basic advanced mode 75.gif

General

The General section is used to configure SIM card parameters that define how the device will establish a mobile connection.

SIM card settings


The SIM Card Settings section is used to configure main SIM card parameters. Refer to the figure and table below for information on the fields contained in that section.

[[File:Networking_rutos_manual_mobile_general_sim_card_settings_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]]

Field Value Description
Deny data roaming off | on; default: off Denies data connection on roaming conditions.
VoLTE Auto | On | Off; default: Auto Enables Voice over LTE, a digital packet technology that uses 4G LTE networks to route voice traffic and transmit data.
Service mode Auto | ; default: Auto Network connection type preference.
PIN integer [0000..99999999]; default: none SIM card's PIN (Personal Identification Number) is a secret numeric password used to authenticate the device to the SIM card. PIN codes are comprised of numbers only and the length can range from 4 to 8 symbols. PIN number is saved in flash memory therefore it does not reset when default settings are restored.

Operator settings


The Operator Settings section is used to configure which operators can be allowed (Whitelist) or blocked (Blacklist).

Networking rutx12 manual mobile general operator settings v1.png

Field Value Description
Enable off | on; default: off Enables Whitelist or Blacklist for specified operator list.
Mode Whitelist | Blacklist; default: Whitelist Mode to be applied for operator list.
  • Whitelist - only allow operators in list
  • Blacklist - block all operators in list
Operator list operator list; default: none A list of operators which can be configured in Operators List page.

SMS limit settings


The SMS Limit Settings section provides you with the possibility to set up a maximum sent SMS message cap for your SIM card.

Networking rutos manual mobile general sms limit settings v2.png

Field Value Description
Enable SMS Limit off | on; default: off Turns SMS limiting on or off.
SMS limit count integer; default: none Sets the SMS sending cap, i.e., how many SMS messages can be sent from this SIM card during the specified period.
Period Day | Week | Month; default: Day Period for which SMS limiting should apply. After the period expires, the SMS limit counter will be reset.
Start hour/day 0-23 / Monday - Sunday / 0-31; default: 0 Starting hour of the day / day of the week / day of the month for SMS limiting period.
Clear SMS Limit - (interactive button) Clears the SMS limit counter for the selected period.


Network operators

The Network operators section provides you with the possibility to scan for and manage mobile network operators to which the device's SIM card can connect to.

[[File:Networking_rutos_manual_mobile_network_operators_scan_dualsim_{{{dualsim}}}.png|border|class=tlt-border]]

Field Value Description
Current operator string; default: none Displays the name of the operator the which the device is currently connected.
Connection mode Auto | Manual | Manual-Auto; default: Auto Operator selection method.
  • Auto - selects the operator automatically.
  • Manual - requires you to select the operator manually. (More on this selection below.)
  • Manual-Auto - prompts you to enter an operator's code, but if the router can't complete the connection, it will automatically connect to the next available operator.

Manual operator selection


To select an operator manually, specify Connection mode: Manual and click 'Scan For Operators'.

[[File:Networking_rutos_manual_mobile_network_operators_scan_proccess_step_1_dualsim_{{{dualsim}}}_v1.png|border|class=tlt-border]]

Will be prompted with a pop-up asking if you're sure. Click 'Scan' if you wish to proceed.

Networking rutos manual mobile network operators scan proccess step 2.png

Wait for the scan to finish. As indicated by the onscreen message, the process can take up to 3 minutes.

Networking rutos manual mobile network operators scan proccess step 3.png


Once the scan has finished, you will see the results in the 'Operators List'.

Networking rutos manual mobile network operators operators list.png

In order to lock the SIM card to using a single operator, place a check mark next to the relevant entry in the list and click 'Save & Apply'.

Operators list


This section is used to create lists of operators codes, which can then be used in Operator settings section to Whitelist of Blacklist them. Operator code consists of two parts - Mobile Country Code (MCC) and Mobile Network Code (MNC).

Networking rutos manual mobile network operators list management v1.png

By clicking Edit Networking rutx manual edit button v1.png on a list you will be redirected to editing page in which you can enter operator codes for that list.

Networking rutos manual mobile network operators list edit v1.png

[[Category:{{{name}}} Network section]]